• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.6
• /
• pp.764-771
• /
• 2018

Domestic and foreign agricultural environments nowadays are undergoing various changes such as aging of agricultural population, increase of earned population, rapid climate change, diversification of agricultural product distribution structure, depletion of water resources and limited cultivation area. In order to respond to various environmental changes in recent agriculture, practical use of Smart Greenhouse to easily record, store and manage crop production information such as crop growing information, growth environment and agriculture work log, Interest is growing. In this paper, we propose a system that collects the situation information necessary for growth such as temperature, humidity, solar radiation, CO2 concentration, and monitor the collected data, which can be measured in the rhizosphere of the crop. We have developed a system that collects data such as temperature, humidity, radiation, and growth environment data, which are measured by data obtained from the rhizosphere measuring section of a growing crop and measured by a sensor, and transmitted to a wireless communication gateway of 400 MHz. We developed the integrated SW that can monitor the rhythm environment data and visualize the data by using cloud based data. We can monitor by graph format and data format for visualization of data. The existing smart farm managed crops and facilities using only the data within the farm, and this study suggested the most efficient growth environment by collecting and analyzing the weather and growth environment of the farms nationwide.

• Journal of Korea Technology Innovation Society
• /
• v.22 no.3
• /
• pp.362-381
• /
• 2019

The purpose of this study is to examine how two factors among various affecting factors of technological innovation, i.e. sectoral system of innovation and R&D support service, were actually applied in the case of NUC Electronics. This company has achieved high level of innovation performance through change of injection port and improvement of extracting rate. This was possible because each component of sectoral system of innovation system was matched with the innovation activity. The improvement of the performance in NUC Electronics was attributable to its own innovation efforts and R&D support service of government research institute. In the process of technological innovation, the company could receive high-level services in areas such as product design and virtual experiments that companies can not solve themselves. It can be said that the role of government and public institutions to support the shortage of SMEs was important. In terms of each component of sectoral system of innovation, we found that there were many opportunities of new technology; sustainability was low; imitation was easy; appropriability was low but it has dualily; accumulation of technology was relatively high, availability of external knowledge was high. At the same time, both of the company and the network played an important role, and market conditions were very favorable. In terms of R&D support services, it is a direct effect that a great deal of time and cost savings have been achieved through virtual experiments on the material and shape of the screw. As an indirect effect, the core competence of the company has been greatly strengthened by utilizing the momentum of technology development through external support, hence the company could establish the structure of virtuous circle of innovation.

• Journal of IKEEE
• /
• v.22 no.4
• /
• pp.1012-1018
• /
• 2018

In this paper, CMOS SAR (Successive Approximation Register) A/D converter with 1.8V supply voltage is designed for IoT sensor processing. This paper proposes design of a 12-bit SAR A/D converter with two A / D converters in parallel to improve the sampling rate. A/D converter1 of the two A/D converters determines all the 12-bit bits, and another A/D converter2 uses the upper six bits of the other A/D converters to minimize power consumption and switching energy. Since the second A/D converter2 does not determine the upper 6 bits, the control circuits and SAR Logic are not needed and the area is minimized. In addition, the switching energy increases as the large capacitor capacity and the large voltage change in the C-DAC, and the second A/D converter does not determine the upper 6 bits, thereby reducing the switching energy. It is also possible to reduce the process variation in the C-DAC by proposed structure by the split capacitor capacity in the C-DAC equals the unit capacitor capacity. The proposed SAR A/D converter was designed using 0.18um CMOS process, and the supply voltage of 1.8V, the conversion speed of 10MS/s, and the Effective Number of Bit (ENOB) of 10.2 bits were measured. The area of core block is $600{\times}900um^2$, the total power consumption is $79.58{\mu}W$, and the FOM (Figure of Merit) is 6.716fJ / step.

• Journal of the Korean Institute of Educational Facilities
• /
• v.26 no.4
• /
• pp.3-10
• /
• 2019

In school facilities, space is the basic framework. The structure and arrangement of space will provide the form and feel of school facilities. In order to become a high-quality school facility, it is necessary to focus on the educational, human and ecological aspects of the instructor and learner until the space is conceived, designed and completed. However, even when public education was introduced in the past, it did not become a school space considering this aspect. The school space, which focuses on efficiency and labor production, is a school space that reflects the characteristics of a factory-type school, which has been occupied by a large number until recently. Although efforts to improve the quality of school facilities have been attempted in recent years, there is also a need to pursue more active changes. Future-oriented and progressive school spaces include flexibility, connectivity, individualization, diversity(creativity). In other words, space should be flexible so that it can be used faithfully according to the educational situation, not the fixed and limited school space as in the past. In the future, the school space should be open and securely linked to the place where it is essential to complete community relations with the community. In addition, space should be flexible so that the school can meet the needs of each student as much as possible. And the school space should be transformed from the space design of the past fixed pattern to reflect the close relationship between spatial, psychological, physiological, and behavioral areas. When school space needs to shift away from the past and change in a new future-oriented direction, the remaining tasks should be presented with specific characteristics and content of the direction. And the function of the consignment should be handled by related research. Although the text of this study reveals the characteristics of future-oriented school space, more concrete and empirical research results should be presented by subsequent research at home and abroad. It is necessary to reduce trial and error in creating a future-oriented school space where both professors and learners can be satisfied by analyzing the common points and differences between the results of the study. In order to do this, it is necessary to make efforts to approach such research based on the participation of the subjects who teach and learn directly at the school site.

• Animal Bioscience
• /
• v.35 no.7
• /
• pp.1021-1029
• /
• 2022

Objective: The study was aimed to investigate the rules of postprandial changes in intestine digesta dry matter (DM) flow and amino acid digestibility of growing pigs fed low-protein (LP) diets made of different starch. Methods: Eight barrows (28.8±2.1 kg) with a T-cannula at the distal ileum were randomly allotted to an 8×3 Youden square design. Treatments included: waxy corn starch LP (WLP); corn starch LP (CLP) and pea starch LP (PLP). Diets were given at 08:00 and 20:00. Digesta samples were collected in six 2-h stages from 08:00 to 20:00. Results: The Cr concentrations of ileal digesta increased and then decreased in WLP and CLP, while increased continuously in PLP as time passed after postprandial (p<0.05). Higher average Cr concentrations (0.78% and 0.84% vs 0.70%; p<0.05) and lower average DM flow (181.1 g/kg and 166.3 g/kg vs 240.3 g/kg; p<0.001) were observed in WLP and CLP, compared with PLP. The apparent ileal digestibility coefficient of most amino acids in WLP and CLP increased compared with that in PLP. No difference in lysine or methionine digestibility was observed. When digesta were collected in 2-h periods, the apparent ileal digestibility coefficient of amino acids did not change over time. When digesta was collected in 4-h periods from 16:00 to 20:00 and 6-h periods from 14:00 to 20:00 (p<0.05), WLP and CLP showed markedly higher amino acid digestibility than PLP Conclusion: High-amylose slowly digested starch can increase the DM flow at the distal ileum and reduce the apparent ileal digestibility coefficient of amino acids of pigs fed LP diets. Compared with waxy corn starch and corn starch, pea starch reduced the digestibility of amino acids in digesta collected after 4 h postprandial.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.4
• /
• pp.561-568
• /
• 2021

In this study, in order to observe the change in the amount of Tire and Road Wear Particles and the ratio of tire components in it according to the tire wear resistance performance, carried out the evaluation by varying the vulcanization reaction design of the tire tread rubber. In addition, in order to improve the reliability of the evaluation of Tire and Road Wear Particles, the evaluation was performed indoor laboratory test equipment that simulates the condition on real driving to exclude various environmental influences including minerals, driver's habits, road surface, weather, tire structure and pattern designs. After the evaluation in closed space, it is estimated that the amount of collected Tire and Road Wear Particles is 84% compared to 100% of the tire and road wear loss weight, of which 96.4~97.7% was around the road and 2.3~3.6% was in the air. As a result of analy sis of the collected Tire and Road Wear particles, the tire component existed 63~75% in the Tire and Road Wear Particles depending on the wear resistance performance of the tire.

• Ecology and Resilient Infrastructure
• /
• v.9 no.3
• /
• pp.131-140
• /
• 2022

The magnitude and frequency of extreme floods are increasing owing to the effects of climate change. Therefore, multipurpose flood management techniques incorporating nature-based solutions have been introduced to mitigate the limitations of flood management and river design methods relying on existing observation data. Nature-based solutions to prepare for such extreme flooding events include ways to retreat the embankment, expand the floodplain, and reduce flood damage. To apply these technologies, adopting appropriate location selection methods based on various evaluation factors, such as flood damage reduction effects, sustainable ecological environments, river connectivity, and physical channel structure enhancements, should be prioritized. Therefore, in this study, the optimal location for implementing the multipurpose floodplain construction project was determined by selecting the location of the floodplain expansion with objectivity in the river waterfront area upstream of Daecheong Dam to downstream of Yongdam Dam. Through the final location determination, the Dongdaeje and Jeogokje sections were included in the optimal location considering both flood damage reduction and water environment improvement.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.4
• /
• pp.587-594
• /
• 2023

In this paper, we present the design and optimization process of an on-body microstrip patch antenna with a paired T-type defect for monitoring fracture recovery of human legs. This antenna is designed to be light, thin and compact despite the improvement of return loss and bandwidth performance by adjusting the size of the T-type defect. The structure around the applied human leg is structured as a 5-layer dielectric plane, and the complex dielectric constant of each layer is calculated using the 4-pole Cole-Cole model parameters. In a normal case without bone fracture, the return loss of the on-body antenna is -66.71dB at 4.0196GHz, and the return loss difference ΔS₁₁ is 37.95dB when the gallus layer have a length of 10.0mm, width of 1.0mme, and height of 2.0mm. A 3'rd degree polynomial is presented to predict the height of the gallus layer for the change in return loss, and the polynomial has a very high prediction suitability as RSS = 1.4751, R² = 0.9988246, P-value = 0.0001841.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.25 no.2
• /
• pp.157-173
• /
• 2023

Although this site is designed with a non-vibration excavation method for a section of 265 m, there are concerns about decline of constructability and economic feasibility. For this reason, the low-vibration electronic detonator blasting method was suggested. To evaluate the applicability of the low-vibration electronic detonator blasting method, the damage range of blasting vibration of low-vibration electronic detonator blasting applied just before the site (suggestion I) and low-vibration electronic detonator blasting constructed close range the subway like this site (suggestion II) was analyzed. As a result of comparing the blasting vibration damage ranges of the two suggestions, the damage range of suggestion II was calculated more conservatively. Considering the specificity of the close range of this site, suggestion II was selected for design change for safer construction. As a result, it is predicted that there will be no damage to the structure even if the 72 m section out of the non-vibration excavation 265 m section is changed to the Low-vibration electronic detonator blasting. And it is evaluated that high economic benefits can be obtained because the total expected excavation period can be reduced by 144 days from 662.5 days.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.10a
• /
• pp.276-279
• /
• 2022

The 4th industrial revolution refers to the transition to a knowledge society in which the production speed of knowledge is fast and the proportion of the knowledge industry is greatly increased. The reorganization of the industrial structure and the change of occupations and jobs due to new technologies are bringing about changes in education, and the development of digital technology has made education that is borderless, individual and dynamic, becoming the new standard of education. With these changes, interest in nano-degrees on new technologies or micro-degrees focused on core courses rather than regular course degrees is increasing. As a representative example, Udacity in the United States has opened and operated online nanodegree courses related to jobs, and collaborates with major companies to develop and educate core training courses necessary for companies, thereby efficiently supporting companies in securing talent. With the revitalization of online vocational and job training, an environment has been prepared in which individuals can set goals for vocational competency development and continue their portfolio-based sustainable learning. However, for effective vocational education, automated and personalized educational content design should be preceded. To this end, in this paper, we propose a personalized career and course map recommendation system in the era of online learning