• 대한치과기공학회지
• /
• 제33권4호
• /
• pp.263-270
• /
• 2011

Purpose: The grindability of binary Ti-X%Zr(X=10,20,40) alloys in order to develop a Ti alloy with better machinability than unalloyed titanium has been evaluated. Methods: Experimental Ti-Zr alloys were made in an argon-arc melting furnace. Slabs of experimental alloys were ground using a SiC abrasive wheel on an electric handpiece at circumferential speeds(12000,18000,25000 or 30000rpm) by applying a force(200gr). Grinding rate was evaluated by measuring the amount of metal volume removed after grinding for 1 minute and the volume ratio of metal removed compared to the wheel material lost, which was calculated from the diameter loss (grinding ratio). Experimental datas were compared to those for cp Ti(commercially pure titanium) and Ti-6%Al-4%V alloy were used controls. Results: It was observed that the grindability of Ti-Zr alloys increased with an increase in the Zr concentration. More, they are higher than cp Ti, particularly the Ti-20%Zr alloy exhibited the highest grindability at all circumferential speeds. There was significant difference in the grinding rate and grinding ratio between Ti-20%Zr alloy and cp Ti at any speed(p<0.05). Conclusion: By alloying with Zr, the Ti exhibited better grindability at all circumferential speeds. the Ti-20%Zr alloy has a great potential for use as a dental machining alloy.

• 대한치과기공학회지
• /
• 제23권2호
• /
• pp.179-188
• /
• 2002

With regard to the manufacture of dental prosthesis, all the dental mechanism is of vital significance at the aspect of activating its function by fixing the prosthesis to Patient's oral cavity. However, if there we will take our immediate action without the discretion about its process none the less for the importance of dental mechanism, then we might have a serious problem. Accordingly, there need to pay attention to the dilatability makes up for the shrinkage state occurring by the feature of metal materials and manufacturing process which appeared in the process of dental mechanism, which eventually is expected to playa very important role in casting a dental prosthesis appropriate to one's oral tissue. This study was designed to take into account of the effects on margin consistency of prosthesis according to the continued time of casting-ring in the course of the casting of dental alloy. For this, the researcher made an experiment on the casting of dental alloy, its dilatability, and the change of phase. The results of this study were as follows: First, the researcher could see that the sample which was cast under the condition of $650^{\circ}C/20$ Minutes(the continued time) was far superior to others at the aspect of margin consistency. Second, according to the measurement of expansion coefficient by Dilatometer, the researcher perceived the fact that the expansion-coefficient showed a maximum of $37.1{\mu}m$ considering the sample's length which was cast with ordinary temperature under the condition of $650^{\circ}C/20$ Minutes. Third, from the result of X-ray diffraction under the condition of $650^{\circ}C/20$ Minutes(the continued time), the researcher could find that there's no difference between the change of phase and its intensity. As mentioned above, the researcher could ascertain the fact that its contraction don't give rise to the change of phase.

• 대한치과기공학회지
• /
• 제29권2호
• /
• pp.141-150
• /
• 2007

The purpose of this study was to ascertain the bonding durability of self-etching dentin bonding agents to dentin by means of shear bonding strength. Several acid-etching dentin bonding system (ESPE Z100) and self-etching dentin bonding systems (DEN-FIL, GRADIA DIRET) were used. The occlusion surface of human molars were ground flat to expose dentin and treated with the etch bonding system according to manufactures instruction and followed by composite resin application. After 24hours of storage at 37$^{\circ}C$, the shear bonding strength of the specimens was measured in a universal testing machine with a 1mm/min crosshead speed. An one-way analysis of variance and the scheffe test were performed to identify significant differences (p<0.05). The bonded interfacial surfaces and treated dentin surfaces were examined using a SEM. Through the analysis of shear bond strength data and micro-structures of dentin-resin interfaces, following results are obtained. In dentin group, the shear bond strength of DEN-FIL showed statistical superiority in comparison to the other groups and followed by ESPE Z100 and GRADIA DIRECT (p<0.05).

• 대한치과기공학회지
• /
• 제15권1호
• /
• pp.27-41
• /
• 1993

Degree of noise by personal dental laboratory working process and degree of noise by complex dental laboratory working process were measured separtely. The time of exposure to noise greater than 70dB was analyzed. Then, the whole degree of noise in dental laboratory was estimated on the basis of afore-mentioned information. Questionaire were employed to investigate the mental, emotional and physiological effects of noise in dental technicians, The purpose of this study was to provide basic information on keeping dental techneicans who are exposed to noise pollution in good working condition and good health. Results obtained are as follows ; 1. Polishing process in each working part showed high degree of noise greater than 70dB in terms of degree of noise by personal working. 2. Degree of noise by complex working process in each working part was greater than that of personal working process. 3. Time of exposure to noise complex working process the part of porcelain 150min, partial denture 120 min, crown and bridge 100 min, full denture 80 min. 4. Degree of noise by time in dental laboratory was 80dB in general for polishing process and below 75dB for waxing process. 5. Effects of noise on mental and emotional state of dental technicians showed that they felt irritated every day(14%), irritated once in a while(29%) and easily ger mad(19%). 6. Effects of noise on heart and stomach were hyper-gastric acid(38%), gastric ulcer(11%), gastritis(5%), deuodenal ulcer(3%) and weak heart function(32%). 7. Effects of noise in the hearing ability were weak(39%), moderate(33%) and normal(14%) Data presented in this study demonstrated that noise in the dental laboratory exerts profound effect on dental technicians mentally, physiologically and emotionally, in light of the above results, therefore, it appears advisable to devots substantial on the management of working condition and put further(continuing) efforts in the investigation for reducing noise problem.

• 대한치과기공학회지
• /
• 제31권3호
• /
• pp.9-14
• /
• 2009

This study evaluated the mechanical properties of Ti-Cu alloys with the hope of developing an alloy for dental casting with better mechanical properties than unalloyed titanium. Ti-Cu alloys with four concentrations of Cu(2,5,10wt%) were made in an argon-arc melting furnace. The microstructure and micro-Vickers hardness were determined. X-ray diffraction pattern test was performed on the polished specimens. The microstructure of 2%Cu and 5%Cu alloys are shown acicular ${\alpha}Ti$ phase formed on the surfaces of previously formed $\beta$grains. The 10%Cu alloys has essentially a eutectoid structure; this structure includes lamella of ${\alpha}Ti$ and $Ti_2Cu$ phase that transformed from ${\alpha}Ti$ at the eutectoid temperature. The micro-Vickers hardness of CP Ti specimens was significantly(p<0.05) lower than that of any of the other alloys. Among the Ti-Cu alloys, the 10%Cu alloys exhibited a significantly(p<0.05) higher hardness value. but lower than that of Ti-6%Al-4%V alloy. From these results, it was concluded that new alloys for dental castings should be designed as Ti-Cu based alloys if other properties necessary for dental castings were obtained.

• 한국치위생학회지
• /
• 제12권4호
• /
• pp.647-654
• /
• 2012

Objectives : To propose the data for prevention of oral health problems through assessment on the knowledge, cognition and practice about oral health care of the clients who visit dental clinics. Methods : The subjects were total 400 clients from the four dental clinics in Busan city. Their knowledge, cognition and performances about oral healthcare collected with questionnaire survey from February to March, 2011. The rate and mean compared by chi-square test, t-test, and ANOVA. Results : Mean level of their knowledge, recognition and practice were 72.5, 80.2, and 65.6, respectively. Theses levels were higher in women (p<0.01), in the group of higher interested (p<0.001), immediately treated (p<0.001), correct tooth brushing (p<0.05), toothbrushing educated (p<0.001), take regular scaling (p<0.001), use assistant hygiene items (p<0.001), instead no differences by age and education level. And, the rate of correct toothbrushing was higher as 1.24 (1.03~1.50) times in the group with higher knowledge level, the rate of immediate treatment and regular scaling were higher as 1.35 (1.07~1.70) times, and 2.26 (1.41~3.64) times in the group with higher recognition level, respectively. Conclusions : These results demonstrate that insufficient knowledge and recognition of oral health care are related to a lack of its practice. Though their primary goal of the visits was treatment, the clients' attention needed to raise the comprehensive knowledge and recognition levels for their oral health promotion, especially reach to the performance level rather than simple knowledge acquisition. And more, to achieve the efficient oral health promotion, the importance of early treatment and strengthened efforts for prevention should be emphasized.

• 한국산학기술학회논문지
• /
• 제12권11호
• /
• pp.5079-5086
• /
• 2011

이 연구의 목적은 치기공과 학생들의 구강위생관리 실태 및 지식을 파악하여 지역사회의 구강건강을 향상시킬 수 있는 동기를 부여하고, 구강보건 교육에 도움이 되고자 함이다. 조사대상자는 충청도 소재 대학의 치기공과에 재학 중인 학생 160명을 대상으로 2010년 11월 10부터 12월 9일까지 설문조사를 실시하였고, 다음과 같은 결론을 얻었다. 일반적 특성에 따른 구강관리 지식차이는 성별로 남자가 여자보다 높았고, 연령별로는 연령이 높아질수록 높았고, 학년별 항목에서는 학년이 높을수록 높았고, 통계적으로 유의한 차이가 있었다(p<0.05). 구강위생관리 실태에 따른 구강관리지식차이는 일일 잇솔질 횟수가 5회 이상에서 가장 높았고, 잇솔질 방법은 옆으로 치아만 한다에서 높았다. 치간 칫솔 이용유무 항목에서는 사용한다가 높았고, 통계적으로 유의한 차이가 있었다(p<0.05). 따라서 전반적인 구강위생관리 실태는 구강보건교육의 경험이 있는 치기공과 학생들이 양호한 것으로 나타났으며, 이를 통해 수업시간에 계속적으로 구강보건교육을 받고 익히는 사람들에게서 구강건강관리가 달라지는 것을 알 수 있었다. 이에 지역사회에서도 구강보건교육의 기회를 확대시켜 국민의 구강건강을 향상시키도록 해야하겠다.

• 한국인터넷방송통신학회논문지
• /
• 제23권1호
• /
• pp.59-64
• /
• 2023

최근 IT 기술의 발전으로 의료영상처리 기술은 치과 분야에서도 많이 사용되고 있으며, CT 등에 의한 3D 데이터를 사용하여 치료 효과를 높이고 있다. 본 논문에서는 치과용 의료영상처리 SW를 개발하기 위해 ITK와 VTK 등 오픈 소스 라이브러리를 소개하고, 이를 사용하여 3D CBCT를 중심으로 치과용 의료영상처리 SW를 개발하는 방법에 대해 소개한다. ITK는 의료영상처리를 위한 기본적인 알고리즘들이 구현되어 있어 영상처리 파이프라인을 빠르게 구현할 수 있고 개발자가 원하는 알고리즘을 필터로 손쉽게 구현할 수 있다. 개발된 알고리즘을 VTK와 연동을 통해 시각화 기능을 구현하였다. 개발된 SW를 사용하면 2D 영상의 한계를 극복하는 치과 진단 및 치료에 활용할 수 있다.

• 한국치위생학회지
• /
• 제12권1호
• /
• pp.27-35
• /
• 2012

Objectives : This study was performed to provide the basic data for oral health of infants, through the comparison of Streptococcus mutans activities(the representative bacteria of initial dental caries), in main nutritional foods for infants: breast milk, milk powder, and soya milk. Methods : The study targeted 30 infants and the saliva was sampled after the oral examination. The pH of sampled saliva was measured; and the sample of 'the saliva', 'the saliva and breast milk', and 'the saliva and formula milk' by researcher were produced; and the measurement was repeated 7 times. Results : As a result of examining the change of colony number of Streptococcus mutans by hour, the bacterial activity took in the source of nutrition took place in the first place; and in the group with dental caries, breast-feeding at night occurreds most frequently. Due to the combined activities, such as the increase in the contact time, the existence rate of dental caries appeared high. However, as the improvement of breast-feeding is closely related to the nutrition supply to babies, rather than the improvement of breast-feeding, the 12 hours after the culture in which Streptococcus mutans activities started was considered. Conclusions : In case of breast-feeding at night, it is necessary to remove the dental plaque in the mouth, before 12 hours has passed. Especially, using toothbrush and toothpaste to decrease the occurrence of dental caries, after the eruption of teeth, is recommended for oral administration.

• 대한치과기공학회지
• /
• 제22권1호
• /
• pp.113-128
• /
• 2000

The purpose of this study was to serve as a basis for the development of dental technology and for creating a condition that dental technicians could work with pride and right values, by examining what problems there were in their health care, what they thought about them, and how the problems could be solved, The findings of this study were as below: 1. The most serious and harmful element in dental technology workshop was a dust(57.5%) and a noise(33.3%). 2. Approximately 99.0% of the dental technicians investigated made a complain of air pollution caused by noise. Their opinion on a possible measure to remove noise air pollution was that the noise-generating machine should be replaced(64.1%) or that it should be isolated(28.8%). 3. 76.0% complained air pollution cause by dust deteriorates their working efficiency. As a way to eliminate it, they suggested a dust chamber(35.3%) or an air cleaner(27.5%) should be installde. 4. About 80% made a complain of gas air pollution. The most common related symptom was a headache(56.9%). They thought that gas-generating machine should be isolated(39.9%) or that an air purifier should be prepared(33.3%). 5. The largest impact of heat and light on their body was weakening their eyesight(56.9%). 47.1% got burn once though four times, and 34.3% did five times or more. The way to prevent them was to install an automatic casting machine(66.0%) or use protective glasses(28.1%). 6. Approximately 47.7% were considering a change of occupation, and the most common reason was heavy work(23.5%), followed by poor prospect(21.6%) and working environment(19.0%) in the order named. 7. 88.9% responded they were likely to have an occupational disease. Their idea about the proper frequency of regular health examination was once a year(53.6%), or once per every six months(41.8%). 8. The field they were most interested in was health care(39.2%), followed by academic research activities(31.4%). This fact indicated it's most urgently required to improve their working environment.