• Journal of the Korean Society for Railway
• /
• v.15 no.2
• /
• pp.122-128
• /
• 2012

Considering structure of depot, it is impossible to install the track circuit systems due to iron-beam. Because rails and earth are connected by the iron-beam, there is much leakage current. So, it is hard to apply the track circuit systems. Thus, when trains go to the depot, sign which indicates existence of trains is used manually. In case of wrong sign, accidents occur such as train crash, derailment etc. Currently, location of trains has been found by using optical sensor in the depot to prevent the accidents. However, it costs a great deal to install and maintain the optical sensor. Therefore, this method is hardly used in train operation institutes. In this paper, virtual track circuit systems are introduced by using software program in the depot. Also, algorithm of the virtual track circuit systems is proposed. In case that signal is handled to the depot which is occupied by the train, safety is ensured by indicating sign which means existence of trains and stop signal. Also, proper fault tolerance techniques are proposed to the software by analyzing reliability and availability.

• Journal of Applied Reliability
• /
• v.11 no.3
• /
• pp.293-303
• /
• 2011

Reliability Prediction using MIL-HDBK-217F has some restrictions due to its one modeling basis. One of the restrictions is caused by selecting one operating environment of a system, which is chosen regardless of its detailed conditions, e.g., external impact and vibration. Especially, an equipment, which is installed on a mobile vehicle though its movement is quasi-static, is controversial to designate its environment as ground mobile($G_M$), rather than ground fixed($G_F$). In this paper, failure rates were compared, which are computed using several moving time rates to total operating time. RiAC-HDBK-217Plus was used as the basic calculation model. In addition, $G_F$ conditioned failure rate was evaluated by comparing with that under $G_M$ environment but fixed state.

• Journal of the Korean Geographical Society
• /
• v.40 no.6 s.111
• /
• pp.631-652
• /
• 2005

This study is to clarify regional structure and connection of international physical distribution through clearance depot of Cheongju customs of inland location. The trade of clearance depot of Cheongju customs industrial characteristics reflects of territorial hinterland. As origins and destinations of freight as exports and imports region, territories of Cheongju customs trade mainly with Japan, China, and USA. Origin and destination of freight of Cheongju customs territory are hinterland and foreland of Incheon International Airport and Busan port. In case of export, foreland of Busan port is board, and in case of import, the hinterlands of Incheon International Airport and Busan port are similar. Clearance depot of inland-located Cheongju is construct by the advantages of rapidness and inexpensive cost. And the kind of freight and system of physical distribution of each enterprise show different characteristics. For each export and import freight, each shipper corporation has its own physical distribution system, and structure of international distribution is classified into export pattern of bonded industry and bonded warehouse. Again the patterns of bonded warehouse are distinguished free on board price system with division of labor in base of production in overseas, free on board price system, and cost-insurance-freight with division of labor in base of production in overseas. These Phenomena are caused by transaction between headquarter and its overseas corporation, initiative freight handling of export corporation, choice of inexpensive cost, and international convention.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.38 no.3
• /
• pp.136-148
• /
• 2015

We analyzed the effect of three different types of inventory systems for saving the total cost using simulation on the system where multiple depots and many retailers disperse on the limited area. Three types of inventory systems are single echelon system with inventory exchange and two-echelon system and the variant two-echelon system. Variant two echelon system is the two-echelon system where the inventory transshipmentsare allowed on every two stage inventory echelons. Inventories kept on every retailer are commonly used for all retailers when certain retailer has stock-out. And when all retailers are stock-out, inventories kept on every depot are commonly used for the retailers whose assigned depots are stock-out. These all three systems are simulated with the constraint of service level on wide range of parameter settings. Simulation results show that cost saving effect appear clear for single echelon system and two-echelon system when shortage cost portion and transportation cost portion becomes large respectively irrespective of depot number. Variant two echelon system seems to be superior to two other systems when transportationcost portion becomes very small. But this superiority is not proved in terms of statistics. So we may conclude that the variant two echelon system may be useless with the higher administrative efforts due to frequent inventory exchange. Also we note that the traditional two echelon system becomes inferior to two other systems in terms of statistics when service level becomes high or when demand variance becomes very large. And inventory integration effect that cost becomes saved when depot number decrease, diminishes when transportation cost or stock-out cost increases irrespective of inventory systems.

• Journal of Aerospace System Engineering
• /
• v.17 no.5
• /
• pp.1-10
• /
• 2023

This research sought to determine the optimal cycle of Planned Depot Maintenance (PDM) for Unmanned Aerial Vehicle (UAV), and PDM through Reliability and Maintainability-based simulation and Operating and Support (O&S) cost analysis using Reliability and Maintainability analysis results. The effectiveness of the PDM was verified economically, and the optimal PDM interval that balances UAV effective operations and sustaining engineering costs was presented.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.20 no.42
• /
• pp.21-30
• /
• 1997

This research fundamentally deals with an analysis of service level for a multi-level inventory distribution system which is consisted of a central distribution center and several branches being supplied stocks from the distribution center, Under continuous review policy, the distribution center places an order for planned order quantity to an outside supplier, and the order quantity is received after a certain lead time. Also, each branch places an order for particular quantity to its distribution center, and receives the order quantity after a lead time. In most practical distribution environment, demands and lead times are generally not fixed or constant, but variable. And these variabilities make the analysis more complicated. Thus, the main objective of this research is to suggest a method to compute the service level at each depot, that is, the distribution center and each branch with variable demands and variable lead times. Further, the model will give an idea to keep the proper level of safety stocks that can attain effective or expected service level for each depot.

• Journal of Korean Institute of Industrial Engineers
• /
• v.24 no.3
• /
• pp.387-396
• /
• 1998

We consider the problem of determining the spare inventory level for a multiechelon repairable-item inventory system. Our model extends the previous results to the system which has an inventory at the central depot as well as at the several bases. We develop an algorithm to find spare inventory levels, which minimize the total expected cost and simultaneously satisfies a specified minimum service level. Comparisons of our algorithm with the simulation show that the algorithm is very accurate and efficient.

• Journal of the Korean Society for Railway
• /
• v.16 no.5
• /
• pp.358-364
• /
• 2013

In the second part of the paper, a design strategy for an apartment complex constructed at a railway depot is proposed for vibration reduction purposes. Various design parameters such as the vehicle operating speeds, artificial land behavior, housing support structure, and apartment sub-structures are individually examined to reduce the transmission of vibrations through building structures. Building construction on an artificial land should be subjected to regulations that require the application of a vibration reduction scheme based on the mechanics that govern the vibration transmission phenomena. The implementation of these parameters at an early design stage will provide a quiet living environment for residents who may be exposed to excessive noise and vibration.

• Industrial Engineering and Management Systems
• /
• v.13 no.2
• /
• pp.163-171
• /
• 2014

Under amazing increase in markets and certain demand on qualified service in the delivery system, global logistic optimization is becoming a keen interest to provide an essential infrastructure coping with modern competitive prospects. As a key technology for such deployment, we have been engaged in the practical studies on vehicle routing problem (VRP) in terms of Weber model, and developed a hybrid approach of meta-heuristic methods and the graph algorithm of minimum cost flow problem. This paper extends such idea to multi-depot VRP so that we can give a more general framework available for various real world applications including those in green or low carbon logistics. We show the developed procedure can handle various types of problem, i.e., delivery, direct pickup, and drop by pickup problems in a common framework. Numerical experiments have been carried out to validate the effectiveness of the proposed method. Moreover, to enhance usability of the method, Google Maps API is applied to retrieve real distance data and visualize the numerical result on the map.

• Proceedings of the KIEE Conference
• /
• 2005.10c
• /
• pp.276-278
• /
• 2005

For over 25 years, the stray currents from DC electric railroads have caused serious interference problems with underground metallic infrastructures in Korea. The most serious interference is reported at the pipelines near the depot areas. Our field survey proves that this phenomena is mainly due to the missing of dedicated rectifiers for mainline, depot and/or workshop areas. Because it takes so much time and costs too much to replace the traction power system, we consider a stray current confinement method which collects the stray currents and drains them to the negative terminal of the rectifier. This can be realized by installing a stray current collecting wire along the depot boundary. Moreover, we found the stray current collecting reinforcement bar located beneath the rails of concrete slab tracks. Using this bar, we arc going to draing the stray currents from mainline rails. In this paper we show the result of field survey on railroad facilities and present the stray current confinement method under field test.