• 한국진공학회지
• /
• 제16권5호
• /
• pp.359-365
• /
• 2007

본 논문에서는 zinc oxide (ZnO)와 gallium이 도핑 된 zinc oxide (GZO)를 이용하여 radio frequency (RF) magnetron sputtering 방법에 의해 상온에서 제작된 bottom-gate 박막 트랜지스터의 특성을 평가하고 분석하였다. 게이트 절연층 물질로서 새로운 물질을 사용하지 않고 열적 성장된 $SiO_2$를 사용하여 게이트 누설 전류를 수 pA 수준까지 줄일 수 있었다. ZnO와 GZO 박막의 표면 제곱평균제곱근은 각각 1.07 nm, 1.65 nm로 측정되었다. 그리고 ZnO 박막은 80% 이상, GZO 박막은 75% 이상의 투과도를 가지고 있었고, 박막의 두께에 따라 투과도가 달라졌다. 또한 두 시료 모두 (002) 방위로 잘 정렬된 wurtzite 구조를 가지고 있었다. 제작된 ZnO 박막 트랜지스터는 2.5 V의 문턱 전압, $0.027\;cm^2/(V{\cdot}s)$의 전계효과 이동도, 104의 on/off ratio, 1.7 V/decade의 gate voltage swing 값들을 가지고 있었고, enhancement 모드 특성을 가지고 있었다. 반면에 GZO 박막 트랜지스터의 경우에는 -3.4 V의 문턱 전압, $0.023\;cm^2/(V{\cdot}s)$의 전계효과 이동도, $2{\times}10^4$의 on/off ratio, 3.3 V/decade의 gate voltage swing 값들을 가지고 있었고, depletion 모드 특성을 가지고 있었다. 우리는 기존의 ZnO와 1wt%의 Ga이 도핑된 ZnO를 이용하여 두 가지 모드의 트랜지스터 특성을 보이는 박막 트랜지스터를 성공적으로 제작하고 분석하였다.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권10호
• /
• pp.1019-1026
• /
• 1996

In this study, we may be presented the carrier oscillation properties for the low-voltage varistor fabricated by a new method of three composition seed grain, in order to analyze the behavior of carriers at the its equivalent circuit model. The oscillation phenomena of carriers appeared from current-voltage characteristics under knee voltage is shown by the transient flow of nontrapped carriers group in the trap level of intergranular layer, surface state and/or depletion layer. In particularly, current oscillation phenomena is hardly shown in the high electric field. It is that the injected carriers from both electrodes are directly from the conduction band of forward biased ZnO grain through the intergranular layer into the reverse biased ZnO grain, because the trap level in the electric field above the knee voltage is mostly filled.

• Bulletin of the Korean Chemical Society
• /
• 제32권12호
• /
• pp.4291-4296
• /
• 2011

Gravitational SPLITT fractionation (GSF) provides separation of colloidal particles into two subpopulations in a preparative scale. Conventionally, GSF is carried out in a thin rectangular channel having two inlets and two outlets at the top and bottom of the channel, respectively. And the channel is equipped with two flow-splitters, one between the top and bottom inlets and another between the top and bottom outlets. A large scale splitter-less GSF system had been developed, which was designed to operate in the full feed depletion (FFD) mode. In the FFD mode, there is only one inlet through which the sample is fed, thus preventing the sample dilution. In this study, the effect of the sample-loading (in the unit of g/hr) on the fractionation efficiency (FE, number% of particles in a GSF fraction that have the sizes expected by theory) of the new large scale splitter-less FFD-GSF system was investigated. The system was tested in the sample-loading range of 3.0-12.0 g/hr with polyurethane latex beads (PU) and sea-sediment. It was found that there is an optimum range in the sample-loading for a FFD-GSF separation. It was also found that there is a general tendency of FE decreasing as the concentration of the sample suspension increases.

• 대한전자공학회논문지SD
• /
• 제40권10호
• /
• pp.24-31
• /
• 2003

Super-steep retrograded channel (SSR)을 갖는 bulk MOSFET, fully-depleted SOI, double-gate MOSFET 구조에 대하여 단채널 효과를 비교 분석하였다. Evanescent-mode를 이용하여, 각 소자 구조에 대한 characteristics scaling-length (λ)를 추출할 수 있는 수식을 유도하고 추출된 λ의 정확도를 소자 시뮬레이션 결과와 비교하여 검증하였다. 70 nm CMOS 기술에 사용 가능하도록 단채널 효과를 효과적으로 제어하기 위해서는 최소 게이트 길이가 5λ 이상이어야 하며 SSR 소자의 공핍층 두께는 약 30 nm 정도로 스케일링되어야 한다. High-κ 절연막은 equivalent SiO2 두께를 매우 작게 유지하지 않을 경우 절연막을 통한 드레인 전계의 침투 때문에 소자를 스케일링하는데 제한을 갖는다.

• 유통과학연구
• /
• 제12권6호
• /
• pp.67-79
• /
• 2014

Purpose - This study aims to accomplish three major research goals. First, it strives to change consumers' focus from peripheral routes to a central route of public service advertising related to the good health policy, without problematic effects, by influencing consumers' knowledge or involvement. Second, this study examines the elaboration likelihood model (ELM) and construal level theory (CLT). Specifically, we consider that the central route of ELM might correspond with the focal goal of CLT. Third, this study analyzes ELM through CLT. That is, ELM predicted that low involvement would take the peripheral route, and high involvement would take the central route. Research design, data, and methodology - This study consisted of three experiments. The first experiment had a 2×2 between-subject design. The subjects were university students and the research period was approximately one year. The first independent variable was the involvement of the overweight issue; this variable was measured and split by the median. The second independent variable was the temporal distance (near vs. distant future); this variable was manipulated. The second experiment also had a 2×2 between-subject design. The first variable was the involvement of cervical adenocarcinoma prevention, and was considered already manipulated by sex. Specifically, males had a low involvement of the disease, but females had high involvement. The second independent variable was priming (power vs. submissive). Power priming would induce abstract thinking, but submissive priming would take concrete processing. The third experiment had a 2×2×2 between-subject design. The first variable was cognitive depletion, and was manipulated by memorizing 9-digit numbers. The second and third independent variables were involvement and abstract thinking induction, such as prior experiments. Data were collected through questionnaires, and were analyzed by an SPSS program. Major hypotheses were tested by examining the interaction effects through ANOVA. Results - Major findings are as follows. First, even for low-involved consumers in the overweight category, distant future manipulation induced them to focus not on the peripheral route but on the central route of the public service advertisement. This result does not correspond to the typical ELM prediction. Second, under power priming, low-involved males of the cervical adenocarcinoma category focused on the peripheral route because of the induction to abstract thinking. This result replicated the first experiment, and confirmed the theoretical robustness. Third, high-involved females focused not on the central but on the peripheral route under the mixed condition of cognitive depletion and near future manipulation. Depletion consumed cognitive resources, and the processing mode of consumers changed from systematic to heuristic. Conclusions - ELM needs to be complemented through CLT in context of public service good health advertising. Specifically, the involvement of ELM may impact consumers' thinking mode (abstract vs. concrete), and the interaction effects may influence consumers' focus on advertising (central vs. peripheral route). This study's limitations were bounded subjects, limited stimuli, and somewhat weak external validity.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.826-829
• /
• 2009

The authors report on the fabrication of p-type depletion mode inverter that composed of two pentacene based thin-film transistors (TFTs) on several dielectric surfaces. We use shift of threshold voltage depends on pentacene-thickness.

• ETRI Journal
• /
• 제39권1호
• /
• pp.62-68
• /
• 2017

In this paper, we present the design and characterization analysis of a cascode GaN field-effect transistor (FET) for switching power conversion systems. To enable normally-off operation, a cascode GaN FET employs a low breakdown voltage (BV) enhancement-mode Si metal-oxide-semiconductor FET and a high-BV depletion-mode (D-mode) GaN FET. This paper demonstrates a normally-on D-mode GaN FET with high power density and high switching frequency, and presents a theoretical analysis of a hybrid cascode GaN FET design. A TO-254 packaged FET provides a drain current of 6.04 A at a drain voltage of 2 V, a BV of 520 V at a drain leakage current of $250{\mu}A$, and an on-resistance of $331m{\Omega}$. Finally, a boost converter is used to evaluate the performance of the cascode GaN FET in power conversion applications.

• 한국산업융합학회 논문집
• /
• 제25권6_3호
• /
• pp.1199-1206
• /
• 2022

Fossil fuels are one of the various energy sources used by humans, and industrial development has been achieved by relying on fossil fuels for a long time in the past. In order to respond to the depletion of fossil fuels and climate change, the world is trying to build an eco-friendly energy ecosystem. Research on efficiency improvement using renewable energy and ESS in various ways for energy conversion is being promoted. In this paper, a microgrid for industrial complexes was designed, constructed, and demonstrated. It was operated in two modes: an independent mode that each plant generates and uses independently and a connected operation mode that allows energy sharing between factories. In the case of independent mode, PV and PCS were intermittently stopped and restarted according to the status change of SoC section of each site. But, in the case of the connected operation mode, stable power supply was confirmed through power transaction through the operation of the entire SoC. This paper presented and verified an algorithm to stably supply power to industrial complexes consisting of various consumers with different load characteristics.

• Preventive Nutrition and Food Science
• /
• 제1권2호
• /
• pp.269-277
• /
• 1996

Bacteriocins are proteins produced by a heterogeneous group of bacteria that have a bactericidal effect on closely related organisms. Recently, bacteriocins from lactic acid bacteria and other food-related organisms have been the subject of much research because of their potential as food biopreservatives. Various modifications of agar plate diffusion assays are the most widely used methods even though the limitations of such assays are generally recognized. The ability to obtain a concentrated crude preparation on bacteriocin by optimizing production parameters greatly simplifies recovery of bacteriocin on subsequent purification steps. Some studies performed to optimize bacteriocins have been purified to homogeneity, and the amino acid sequences of many of these purified bacteriocins have been determined. Obtaining characterization data on purified bacteriocin will minimize the risk of overlapping of research and confusion on identification of these compounds. Several me-chanisms leading to cell death have been hypothesized. These include depletion of the proton motive force(PMF) across the cell membrane: RNase and/or DNase activity within the sensitive cell; and pore formation and lysis of sensitive cells at the cell membrane.

• The Korean Journal of Physiology and Pharmacology
• /
• 제8권2호
• /
• pp.101-110
• /
• 2004

Voltage-sensitive release mechanism was pharmacologically dissected from the $Ca^{2+}-induced\;Ca^{2+}\;release$ in the SR $Ca^{2+}$ release in the rat ventricular myocytes patch-clamped in a whole-cell mode. SR $Ca^{2+}$ release process was monitored by using forward-mode $Na^+-Ca^{2+}$ exchange after restriction of the interactions between $Ca^{2+}$ from SR and $Na^+-Ca^{2+}$ exchange within micro-domains with heavy cytosolic $Ca^{2+}$ buffering with 10 mM BAPTA. During stimulation every 10 s with a pulse roughly mimicking action potential, the initial outward current gradually turned into a huge inward current of $-12.9{\pm}0.5\;pA/pF$. From the inward current, two different inward $I_{NCX}s$ were identified. One was $10\;{\mu}M$ ryanodine-sensitive, constituting $14.2{\pm}2.3%$. It was completely blocked by $CdCl_2$ (0.1 mM and 0.5 mM) and by $Na^+-depletion$. The other was identified by 5 mM $NiCl_2$ after suppression of $I_{CaL}$ and ryanodine receptor, constituting $14.8{\pm}1.6%$. This latter was blocked by either 10 mM caffeine-induced SR $Ca^{2+}-depletion$ or 1 mM tetracaine. IV-relationships illustrated that the latter was activated until the peak in $30{\sim}35\;mV$ lower voltages than the former. Overall, it was concluded that the SR $Ca^{2+}$ release process in the rat ventricular myocytes is mediated by the voltage-sensitive release mechanism in addition to the $Ca^{2+}-induced-Ca^{2+}\;release$.