• Current Optics and Photonics
• /
• 제1권4호
• /
• pp.278-283
• /
• 2017

We theoretically study the dynamics of water tetramer in intense femtosecond laser pulses with different frequencies. The simulations are carried out by incorporating the molecular dynamics method non-adiabatically into the time-dependent local-density approximation (TDLDA-MD). Three typical scenarios of water tetramer including the normal vibration with enlarged OH bonds, free OH bonds breaking and the pure Coulomb explosion are presented by investigating the electronic and ionic dynamics. The result indicates that the ionization is enhanced and the corresponding fragmentation effect as well as the damping of the dipole moment are found more notably when increasing the laser frequency especially when the frequency falls in the resonant region of the absorption spectra. The study of the level depletion reveals that the ratio of the emission amount from different levels can be controlled by changing the laser frequency referring to the Keldysh parameter.

• E2M - 전기 전자와 첨단 소재
• /
• 제7권4호
• /
• pp.300-305
• /
• 1994

We determined the alloy composition of the liquid-phase epitaxy(LPE) grown $Al_{x}$G $a_{1-x}$ As by the photoreflectance(PR), and observed the variation of PR signal by changing the condition of annealing and thickness of epilayer. As the measuring temperature was decreased, the broadening parameter was decreased, and the amplitude of PR signal was increased. When the temperature of annealing was increased, the surface carrier concentration was decreased and then the shape and amplitude of PR signal were affected by the surface electric field. The structure change was observed when the specimen was annealed for long time at a high temperature. We found that the surface electric field increased when the thickness of epilayer was decreased by etching, because the band bending was increased by the decreased of the width of depletion layer....

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제10권1호
• /
• pp.61-65
• /
• 2010

Threshold voltage is one of the most important factors in a device modeling. In this paper, analytical method to calculate threshold voltage for recessed channel (RC) MOSFETs is studied. If we know the fundamental parameter of device, such as radius, oxide thickness and doping concentration, threshold voltage can be obtained easily by using this model. The model predicts the threshold voltage which is the result of 2D numerical device simulation.

• 한국표면공학회지
• /
• 제49권2호
• /
• pp.159-165
• /
• 2016

The hydrogen has been recognized as a clean, nonpolluting and unlimited energy source that can solve fossil fuel depletion and environmental pollution problems at the same time. Water electrolysis has been the most attractive technology in a way to produce hydrogen because it does not emit any pollutants compared to other method such as natural gas steam reforming and coal gasification etc. In order to improve efficiency and durability of the water electrolysis, comprehensive studies for highly active and stable electrocatalysts have been performed. The platinum group metal (PGM; Pt, Ru, Pd, Rh, etc.) electrocatalysts indicated a higher activity and stability compared with other transition metals in harsh condition such as acid solution. It is necessary to develop inexpensive non-noble metal catalysts such as transition metal oxides because the PGM catalysts is expensive materials with insufficient it's reserves. The optimization of operating parameter and the components is also important factor to develop an efficient water electrolysis cell. In this study, we optimized the operating parameter and components such as the type of AEM and density of gas diffusion layer (GDL) and the temperature/concentration of the electrolyte solution for the anion exchange membrane water electrolysis cell (AEMWEC) with the transition metal oxide alloy anode and cathode electrocatalysts. The maximum current density was $345.8mA/cm^2$ with parameter and component optimization.

• 비파괴검사학회지
• /
• 제22권3호
• /
• pp.284-291
• /
• 2002

전기비저항법을 이용하여 2.25Cr-1Mo 강의 경년열화도를 평가하고자 하였다. 2.25Cr-1Mo 강이 $540^{\circ}C$에서 장시간 노출되었을 때 일어나는 미세조직 변화를 모사하기 위해 인공 열화를 실시하였으며 열화에 따른 미세조직 인자 (고용원소의 함량), 기계적 성질 (연성-취성 천이온도 ), 전기비저항을 측정하여 이들간의 상호관계를 구하고자 하였다. 열화재에서는 기지내의 고용 원소 (Mo 와 Cr)의 고갈이 나타났다. 연성-취성 천이온도는 열화 초반부에 급격히 증가 후 포화되는 경향을 보인 반면 전기비저항은 열화 초반부에 급격히 감소 후 포화되는 경향을 보였다. 즉, 열화 시간에 따른 연성-취성 천이온도의 변화 경향과 전기비저항의 변화는 서로 반대적으로 변화하는 관계를 나타내었다.

• 센서학회지
• /
• 제9권4호
• /
• pp.274-280
• /
• 2000

본 논문은 감마선 방사선 선량을 측정하기 위하여 상용 반도체를 응용하기 위한 실험적 연구에 대하여 다루었다. 실리콘 포토 다이오드는 값이 싸고 작으며 높은 효율과 견고하여 광검출기로 잘 이용되기 때문에 감마선과 같은 방사선 측정에 효과적으로 이용될 수 있다. 대부분의 PN 포토 다이오드는 이 증가함에 따라 역 방향 전류의 증가하는 특성을 가지고 있다. 그러므로 이 소자들의 공핍층이 역 방향 전류에 영향을 주므로 이 공핍층의 면적이 큰 PIN 포토 다이오드를 선택하였다. 이 연구에서는 방사선량을 검출하고 감마선 선량계를 개발하는데 적용하기 위하여, PIN 다이오드에 대해 몇 가지 실험이 수행되었다. NEC사의 PH 302와 SIEMENS사의 BPW 34와 같은 2가지 종류의 포토 다이오드를 반도체 분석장치를 사용하여 $\gamma$선 방사선원인 Co-60의 저준위 시설에서 시험하였다. 그 결과, 방사선 선량률과 다이오드의 전류 사이에 양호한 선형적 함수 관계가 나타나는 것을 확인할 수 있었다. 따라서, 이들 실리콘 PIN 포토 다이오드들은 $\gamma$선 선량계를 설계하는데 적합하게 이용될 수 있을 것이다.

• 한국수자원학회논문집
• /
• 제31권6호
• /
• pp.657-665
• /
• 1998

홍수가 발생하기 전에 위험을 진단할 수 있는 기법이 다음의 절차를 따라 마련되었다. 현존 가용 수자원이 평균치 보다 많은 지 여부를 결정한다. 평균치보다 많은 날의 연속기간을 계산한다. 연속된 기간동안 강수량을 누적한다. 누적된 강수량 중에서 일별 감소량(유출 및 증발산등에 의한)을 감한 다음 다시 하루강수량으로 환산한 것이 유효강수량이다. 유효강수량을 다시 계절적, 지역적 평균치와 비교하여 일반화된 수자원의 집중정도 즉 유효강수지수를 구한다. 유효강수지수가 큰 값을 가지면 홍수의 위험은 증대한다. 이 방법은 1996년 7월말 한반도의 경기 강원지역의 홍수사례를 분석한 연구(한국수자원학회, 1996)와 동일한 사례에 적용하여 그 결과를 비교하였다. 종래의 강우-유출 모형이 가지는 두 가지 과정, 즉 매개변수 추정의 단계와 수위관측의 단계를 생략하였기 때문에 계산이 신속하게 되어 위급할 때 사용될 수 있는 장점이 확인되었다. 두 과정을 생략하고도 유출량이 고려되었기 때문에 강수량만으로 진단하는 방법보다 과학적임이 입증되었다.

• Journal of Microbiology and Biotechnology
• /
• 제3권3호
• /
• pp.168-173
• /
• 1993

The expression kinetics of human lipocortin I (LCI), a potential anti-inflammatory agent, was studied in the shake-flask and fermenter cultures of Saccharomyces cerevisiae carrying a galactose-inducible expression system. The cell growth, expression level of LCI, and the plasmid stability were investigted under various galactose induction conditions. The expression of LCI was repressed by the presence of a very small amount of dextrose in the culture medium, but it was induced by galactose after dextrose became completely depleted. The optimal ratio of dextrose to galactose for lipocortin I production was found to be 1.0 (10 g/l dextrose and 10 g/l galactose). With optimal D/G ratio of 1.0 and the addition of galactose prior to dextrose depletion, LCI of about 100~130 mg/l was produced. LCI at a concentration of 174 mg/l was porduced in the fed-batch culture, which was nearly a twice as much of that produced in the batch culture. The plasmid stability was very high in all culture cases, and thus was considered to be not an important parameter in the expression of LCI.

• Progress in Superconductivity
• /
• 제13권3호
• /
• pp.178-183
• /
• 2012

Two $RuSr_2(EuCe)Cu_2O_z$ samples (as prepared and after $N_2$ treatment) have been investigated by thermogravimetric (TC) analysis, high-resolution x-ray powder diffraction and magnetization measurements. TG measurements which were carried out in $H_2/Ar$ atmosphere showed that the $N_2$ treatment of the as-prepared sample at $650^{\circ}C$ for 2h leads to a decrease in the oxygen content z by about 0.25. This oxygen depletion was accompanied by an increase in the magnetic transition temperature from 54.0 K to 114.9 K. This magnetic behavior is discussed in connection with the results of Rietveld analysis of the x-ray diffraction data which showed that the $N_2$ treatment resulted in both a significant increase in the rotation angle of the $RuO_6$ octahedra and a decrease in c-lattice parameter of the sample.

• Archives of Pharmacal Research
• /
• 제21권5호
• /
• pp.508-513
• /
• 1998

The hepatoprotective effect of DA-9601, a quality-controlled extract of artemisisa asiatica, on liver damage induced by acetaminophen (APAP) and carbon tetrachloride ($CCI_{4}$) was investigated by means of serum-biochemical, hepatic-biochemical, and histopathological examinations. Doses of Da-9601 (10, 30, or 100 mg/kg) were administered intragastrically to each rat on three consecutive days i.e. 48 h, 24 h and 2 h before a single administration of APAP (640 mg/kg, i.p.) or $CCI_{4}$ (2 ml/kg, p.o.). Four h and 24 h after hepatotoxin treatment, the animals were sacrificed for evaluation of liver damage. Pretreatment of Da-9601 reduced the elevation of serum ALT, AST. LDH and histopathological changes such as centrilobular necrosis, vacuolar degeneration and inflammatory cell infiltration dose-dependently. Da-9601 also prevented APAP- and $CCI_{4}$-induced hepatic glutathione (GSH) depletion and $CCI_{4}$-induced increase of hepatic malondialdehyde (MDA), a parameter of lipid peroxidation, in a chemically induced liver injury by complex mechanisms which involve prevention of lipid peroxidation and preservation of hepatic GSH.