• Restorative Dentistry and Endodontics
• /
• 제39권3호
• /
• pp.172-179
• /
• 2014

Objectives: This study aimed to assess the effect of 38% carbamide peroxide on the microleakage of class V cavities restored with either a silorane-based composite or two methacrylate-based composites. Materials and Methods: A total of 96 class V cavities were prepared on the buccal surface of extracted human teeth with both enamel and dentin margins and were randomly assigned into three groups of Filtek P90 (3M-ESPE) + P90 system adhesive (3M-ESPE)(group A), Filtek Z250 (3M-ESPE) + Adper Prompt L-Pop (3M-ESPE)(group B) and Filtek Z350XT (3M-ESPE) + Adper Prompt L-Pop (group C). Half of the teeth were randomly underwent bleaching (38% carbamide peroxide, Day White, Discus Dental, applying for 15 min, twice a day for 14 day) while the remaining half (control) were not bleached. Dye penetration was measured following immersion in basic fuchsine. Data were statistically analyzed using Kruskal-Wallis and Mann-Whitney U tests at a level of 0.05. Results: No significant differences were found between composites in the control groups in enamel (p = 0.171) or dentin (p = 0.094) margins. After bleaching, microleakage of Z250 (in enamel [p = 0.867] or dentin [p = 0.590] margins) and Z350 (in enamel [p = 0.445] or dentin [p = 0.591]margins) did not change significantly, but the microleakage of P90 significantly increased in both enamel (p = 0.042) and dentin (p = 0.002) margins. Conclusions: No significant differences were noted between the bleached and control subgroups of two methacrylate-based composites in enamel or dentin margins. Microleakage of silorane-based composite significantly increased after bleaching.

• 대한소아치과학회지
• /
• 제35권4호
• /
• pp.619-627
• /
• 2008

본 연구는 여러가지 상아질 접착제들의 법랑질 변연과 상아질 변연에서의 미세누출을 비교 평가하기 위해 이루어졌다. 발거된 건전한 영구치의 협면과 설면에 5급 와동을 형성하고 형성된 50개의 와동을 무작위로 5개의 군으로 나누어 각군에 Adper$^{TM}$ Scotchbond$^{TM}$ Multi-purpose Plus Adhesive (SM; 3M ESPE, USA), Adper$^{TM}$ Single bond 2 (SB; 3M ESPE, USA), Clearfil$^{TM}$ SE Bond (SE; Kuraray Medical Inc., Japan), Adper$^{TM}$ Prompt$^{TM}$ L-Pop$^{TM}$ (PL; 3M ESPE, USA), GBond$^{TM}$ (GB; GC Co., Japan)를 적용하고 Filtec$^{TM}$ Z350 A3 (3M ESPE, USA)로 충전하였다. 시편을 $37^{\circ}C$ 증류수에 24 시간 보관한 후 $5^{\circ}C$와 $55^{\circ}C$에서 10초씩 1000회 열순환하고 2% methylene blue 용액에 24시간 넣어 염색한 뒤, 주수 하에 치아를 협설로 절단하여 색소의 침투 정도를 화상분석현미경을 이용하여 침투깊이를 측정한 뒤 각 군간의 미세누출 정도를 비교하여 침투깊이에 따라 $0{\sim}3$점으로 분류하여 다음과 같은 결과를 얻었다. 1. 법랑질 변연에서의 미세누출은 PL(0.85), SB(0.55), GB(0.50), SM(0.35), SE(0.25) 순이었으며 PL은 SM 및 SE 와 통계학적으로 유의한 차이를 나타냈다(p<0.05). 2. 상아질 변연에서의 미세누출은 GB(2.10), SE(1.45), PL(1.40), SB(1.05), SM(0.70)순이었으며 GB는 SB 및 SM 과 통계학적으로 유의한 차이를 나타냈다(p<0.05). 3. 각 실험재료 군내에서 법랑질 변연에 비해 상아질 변연에서 미세누출이 더 크게 나타났으며, SE, PL, GB에서 통계학 적으로 유의한 차이를 나타냈다.(p<0.05)

• Restorative Dentistry and Endodontics
• /
• 제44권3호
• /
• pp.27.1-27.12
• /
• 2019

This case report describes a technique in which endodontic treatment and permanent indirect restoration were completed in the same clinical appointment with the aid of a computer-aided design/computer-aided manufacturing (CAD/CAM) system. Two patients were diagnosed with irreversible pulpitis of the mandibular first molar. After access preparation, root canals were located, irrigation was performed until bleeding ceased, and the coronal tooth structure was prepared for indirect restoration. Then, utilizing an interim 3-mm build-up of the endodontic access cavity, a hemi-arch digital scan was performed with an intraoral scanner. Subsequent to digital scanning, restoration design was performed simultaneously with the endodontic procedure. The root canals were shaped using the Race system under irrigation with 2.5% sodium hypochlorite followed by root canal filling. The pulp chamber was subsequently filled with a 3-mm-thick composite resin restoration mimicking the interim build-up previously utilized to facilitate block milling in the CAD/CAM system. Clinical try-in of the permanent onlay restoration was followed by acid etching, application of a 5th generation adhesive, and cementation of the indirect restoration. Once the restoration was cemented, rubber dam isolation was removed, followed by occlusal adjustment and polishing. After 2 years of follow-up, the restorations were esthetically and functionally satisfactory, without complications.

• Restorative Dentistry and Endodontics
• /
• 제37권1호
• /
• pp.9-15
• /
• 2012

Objectives: This study evaluated the effect of 2% chlorhexidine digluconate (CHX) with different application times on microtensile bonds strength (MTBS) to dentin in class I cavities and intended to search for ideal application time for a simplified bonding protocol. Materials and Methods: Flat dentinal surfaces with class I cavities ($4mm{\times}4mm{\times}2mm$) in 40 molar teeth were bonded with etch-and-rinse adhesive system, Adper Single Bond 2 (3M ESPE) after: (1) etching only as a control group; (2) etching + CHX 5 sec + rinsing; (3) etching + CHX 15 sec + rinsing; (4) etching + CHX 30 sec + rinsing; and (5) etching + CHX 60 sec + rinsing. Resin composite was builtup with Z-250 (3M ESPE) using a bulk method and polymerized for 40 sec. For each condition, half of the specimens were immediately submitted to MTBS test and the rest of them were assigned to thermocycling of 10,000 cycles between $5^{\circ}C$ and $55^{\circ}C$ before testing. The data were analyzed using two-way ANOVA, at a significance level of 95%. Results: There was no significant difference in bond strength between CHX pretreated group and control group at the immediate testing period. After thermocycling, all groups showed reduced bond strength irrespective of the CHX use. However, groups treated with CHX maintained significantly higher MTBS than control group (p < 0.05). In addition, CHX application time did not have any significant influence on the bond strength among groups treated with CHX. Conclusion: Application of 2% CHX for a short time period (5 sec) after etching with 37% phosphoric acid may be sufficient to preserve dentin bond strength.

• 대한소아치과학회지
• /
• 제32권2호
• /
• pp.293-299
• /
• 2005

소아환자의 수복치료에서 시술시간과 시술과정을 줄이는 것은 중요한 점이다. 복합레진은 물성의 증가로 영구치, 유치 전치부 심미수복재로써 뿐만 아니라 구치부 수복에도 많이 쓰이고 있다. 최근에 개발된 7세대 상아질 결합제는 기존의 복합레진을 치면에 부착하기 위해 필요했던 산부식, 프라이밍, 접착제 도포의 복잡한 과정을 한번의 처리로 단순화하였다. 본 연구에서는 유치 상아질에서 7세대 상아질 결합제의 결합력을 기존에 사용되고 있는 여러 결합제의 결합력과 비교하였다. 1, 2, 3, 4군은 각각 4, 5, 6, 7세대 상아질 결합제를 사용하였다. 유치 상아질을 노출시키고 군에 따라 상아질 면을 처리한 후에 직경 2.5mm, 높이 2.0mm의 주형을 이용하여 복합레진을 접착시키고 열순환을 시행한 다음 전단결합강도를 측정하여 다음과 같은 결론을 얻었다. 1. 5세대 상아질 결합제인 Clearfil SE Bond가 가장 높은 전단결합강도인 $27.87{\pm}5.33\;MPa$를 보였다. 이것은 4, 6, 7세대와 비교했을 때 통계학적으로 유의하였다. 2. 4세대 상아질 결합제의 전단결합강토는 $20.11{\pm}5.73\;MPa$로 6, 7세대보다는 약간 높게 나타났지만 통계적으로 유의한 차이는 보이지 않았다. 3. 6, 7세대 상아질 결합제의 전단결합강도는 유사하게 나타났다.

• 대한치과교정학회지
• /
• 제43권5호
• /
• pp.242-247
• /
• 2013

Objective: To test the null hypothesis that no difference exists between the effects of at-home bleaching and in-office bleaching on shear bond strength (SBS) with bracket bonding at 4 different time intervals after dental bleaching. Methods: Ninety extracted human premolars were randomly divided into 9 groups (n = 10) according to the bleaching methods used (at-home bleaching and in-office bleaching) and the storage time in artificial saliva (30 min, 1 day, 2 weeks, and 3 weeks before bonding). The control group was stored in artificial saliva for 7 days. Brackets were bonded with the Transbond XT adhesive system, and SBS testing was performed. The adhesive remnant index (ARI) was used to assess the amount of resin remaining on the enamel surfaces after debonding. The SBS data were analyzed by analysis of variance (ANOVA) and the Tukey test. For the ARI, the Kruskal-Wallis test was performed. Significance for all statistical tests was predetermined to be p < 0.05. Results: The SBS of the unbleached group was significantly higher (p < 0.05) than that of the bleached groups (except for the group bonded 30 min after at-home bleaching). Conclusions: The null hypothesis was not totally rejected. All bleaching groups tested had decreased SBS of the brackets to the enamel, except for the group bonded 30 min after at-home bleaching. The SBS returned to values close to those of the unbleached enamel within 3 weeks following bleaching.

• 대한치과보철학회지
• /
• 제28권2호
• /
• pp.147-163
• /
• 1990

Although dental porcelain demonstrates lasting esthetic results, it suffers from inherent brittle fractures. Various techniques and materials for intraoral porcelain repair has been suggested. This study investigated the in vitro shear strength of three porcelain repair systems according to aspects of the porcelain fractures. The purpose of this study was to evaluate the shear bond strength of three porcelain repair systems(All-bond, Clearfil, Scotchprime) according to fractured surface of porcelain - fused - to - metal restorations. For this study specimens were divided into five groups : group 1 represented fracture occurred at body porcelain layer, group 2 represented fracture occurred at opaque porcelain layer, group 3 represented fracture including 1/3 of metal exposure, group 4 represented fracture including 2/3 of metal exposure, and group 5 represented all metal surface was exposed. Specimens were stored in double deionized water(24Hr, $37^{\circ}C$) and thermocycling was performed(24Hr, 1080cycles), and subjected to a shear force parallel to the repair resin and porcelain interface by use of an University Testing Machine. The results of this study were obtained as follows : 1. In group 1 and 2, bond strength was relatively high, and bond strength showing reducing tendency as exposure of metal was increased. 2. In group 1, bond strength was relatively high, and no significant differences in porcelain repair system. 3. In group 2, 3 and 4, All-bond and Clearfil provided significantly higher bond strength than scotchprime. 4. In group 5, bond strength was the lowest among all groups and especially in case if Scotchprime. 5. Cohesive failure was observed in group 1 and 2, adhesive failure was observed in group 5, and cohesive / adhesive failures were observed in group 3 and 4.

• Nuclear Engineering and Technology
• /
• 제53권1호
• /
• pp.216-233
• /
• 2021

In this work, Rhizophora spp. particleboard phantoms were made using SPI-based adhesives, modified with sodium hydroxide and itaconic acid polyamidoamine-epichlorohydrin (0, 5, 10, and 15 wt%). An X-ray computed tomography (CT) imaging system was used to ascertain the CT numbers and density distribution profiles of the particleboards. The SPI-based/NaOH/IA-PAE/Rhizophora spp. particleboard phantoms with 15 wt% IA-PAE addition level had the highest solid content, flexural strength, flexural modulus, and internal bonding strength of 36.06 ± 1.08%, 18.61 ± 0.38 Nmm^-2, 7605.76 ± 0.89 Nmm^-2, and 0.463 ± 0.053 Nmm^-2, respectively. The moisture content, mass density, water absorption, and dimensional stability were 6.93 ± 0.27%, 0.962 ± 0.037 gcm^-3, 22.36 ± 2.47%, and 10.90 ± 0.86%, respectively. The results revealed that the mass attenuation coefficients and effective atomic number values within the 16.59-25.26 keV photon energy region, were close to the calculated XCOM values in water, with a p-value of 0.077. Moreover, the CT images showed that the dissimilarities in the discrepancy of the profile density decreased as the IA-PAE concentrations increased. Therefore, these results support the appropriateness of the SPI-based/NaOH/IA-PAE/Rhizophora spp. particleboard with 15 wt% IA-PAE adhesive as a suitable tissue-equivalent phantom material for medical health applications.

• 대한치과교정학회지
• /
• 제43권5호
• /
• pp.235-241
• /
• 2013

Objective: The purpose of this study was to investigate whether extension of the custom base is necessary for enhancement of bond strength, by comparing the debonding forces and residual adhesives of 3 different lingual bracket systems. Methods: A total of 42 extracted upper premolars were randomly divided into 3 groups of 14 each for bonding with brackets having (1) a conventional limited resin custom base; (2) an extended gold alloy custom base: Incognito${TM}$; and (3) an extended resin custom base: KommonBase${TM}$. The bonding area was measured by scanning the bracket bases with a 3-dimensional digital scanner. The debonding force was measured with an Instron universal testing machine, which applied an occlusogingival shear force. Results: The mean debonding forces were 60.83 N (standard deviation [SD] 10.12), 69.29 N (SD 9.59), and 104.35 N (SD17.84) for the limited resin custom base, extended gold alloy custom base, and extended resin custom base, respectively. The debonding force observed with the extended resin custom base was significantly different from that observed with the other bases. In addition, the adhesive remnant index was significantly higher with the extended gold alloy custom base. Conclusions: All 3 custom-base lingual brackets can withstand occlusal and orthodontic forces. We conclude that effective bonding of lingual brackets can be obtained without extension of the custom base.

• The Journal of Advanced Prosthodontics
• /
• 제9권4호
• /
• pp.257-264
• /
• 2017

PURPOSE. To evaluate the adhesion to CAD/CAM feldspathic blocks by failure analysis and shear bond strength test (SBSt) of different restorative systems and different surface treatments, for purpose of moderate chipping repair. MATERIALS AND METHODS. A self-adhering flowable composite (Vertise Flow, Kerr) containing bi-functional phosphate monomers and a conventional flowable resin composite (Premise Flow, Kerr) applied with and without adhesive system (Optibond Solo Plus, Kerr) were combined with three different surface treatments (Hydrofluoric Acid Etching, Sandblasting, combination of both) for repairing feldspathic ceramics. Two commercial systems for ceramic repairing were tested as controls (Porcelain Repair Kit, Ultradent, and CoJet System, 3M). SBSt was performed and failure mode was evaluated using a digital microscope. A One-Way ANOVA (Tukey test for post hoc) was applied to the SBSt data and the Fisher's Exact Test was applied to the failure analysis data. RESULTS. The use of resin systems containing bi-functional phosphate monomers combined with hydrofluoric acid etching of the ceramic surface gave the highest values in terms of bond strength and of more favorable failure modalities. CONCLUSION. The simplified repairing method based on self-adhering flowable resin combined with the use of hydrofluoric acid etching showed high bond strength values and a favorable failure mode. Repairing of ceramic chipping with a self-adhering flowable resin associated with hydrofluoric acid etching showed high bond strength with a less time consuming and technique-sensitive procedure compared to standard procedure.