Seo Eun-Seong;Lee Jin-Ha;Choi Jae-Young;Seo Mi-Young;Lee Hee-Sun;Chang Seuk-Sang;Lee Hyung-Jong;Choi Jeong-Sik;Kim Doman
Biotechnology and Bioprocess Engineering:BBE
/
v.9
no.5
/
pp.339-344
/
2004
A method for synthesizing branched fructo-oligosaccharides (BFOS) with a high concentration of sucrose ($1{\~}3$ M) was developed using levansucrase prepared from Leuconortoc mesenteroides B-1355C. The degree of polymerization of oligosaccharides synthesized according to the present method ranged from 2 to over 15. The synthesized BFOS were stable at a pH ranges of 2 to 4 under $120^{\circ}C$. The percentage of BFOS in the reaction digest was $95.7\%$ (excluding monosaccharides; $4.3\%$ was levan). BFOS reduced the insoluble glucan formation by Streptococcus sobrinus on the surfaces of glass vials or stainless steel wires in the presence of sucrose. They also reduced the growth and acid productions of S, sobrinus. Oligosaccharides can be used as sweeteners for foods such as beverages requiring thermo- and acid-stable properties and 3s potential inhibitors of dental caries.
Nowadays, the development of dental scanner and CAD/CAM technology can facilitate the fabrication of hybrid prosthesis. Double scanning technique, scanning a trial prosthesis and master model, made it possible to realize virtual design and simplify the laboratory work. Instead of using the metal or zirconia framework with composite, ceramic or denture tooth, the new high performance polymer Polyetherketoneketone (Pekkton, Cendres+$M{\acute{e}}taux$, Biel, Switzerland) as a framework with Polymethyl methacrylate (PMMA) veneering teeth (Visio-lign, Bredent, Senden, Germany) was used in this case. This case report showed an acceptable treatment outcome and satisfaction of patient using Pekkton and Visio-lign. However, long term clinical evaluation is needed.
The study surveyed 350 people who are over 18 and not related to dentistry with questionnaires in order to examine image and preference of dental technicians. The data analysis was done using the SPSS 21.0 for Windows. As for the analysis methods, the study used the frequency analysis, percentage, t-test, f-test. Through these analyses, the following conclusions were made. The score on the image of dental technicians declined in the order of occupational image(3.62), work image(3.46). The necessity of professional knowledge and techniques in the occupational image had the highest score with 4.17. Also, the image showing that it is professional had a score of 4.14 and the image that shows hardworking and stressful occupation showed the lowest score with 2.43. The study on the preference of dental technicians showed a low score of 2.67. The respondents who are in the 20s(3.53), and who are students(3.29) showed a high score. Also, people who have monthly income of less than 1.5 million won showed a high score of 2.91.With the help of information technology.
Purpose: A study analysed the stress distribution of abutment screw and supporting bone of fixture by the tightening torque force of the abutment screw within clinical treatment situation for the stability of the dental implant prosthesis. Methods: The finite element analysis was targeted to the mandibular molar crown model, and the implant was internal type 4.0 mm diameter, 10.0 mm length fixture and abutment screw and supporting bone. The occlusal surface was modeled in 4 cusps and loaded 100 N to the buccal cusps. The connection between the abutment and the fixture was achieved by combining three abutment tightening torque forces of 20, 25, and 30 Ncm. Results: The results showed that the maximum stress value of the supporting bone was found in the buccal cortical bone region of the fixture in all models. The von Mises stress value of each model showed 184.5 MPa at the 20 Ncm model, 195.3 MPa in the 25 Ncm model, and 216.5 MPa in the 30 Ncm model. The contact stress between the abutment and the abutment screw showed the stress value in the 20 Ncm model was 201.2 MPa, and the 245.5 MPa in the 25 Ncm model and 314.0 MPa in the 30 Ncm model. Conclusion: The increase of tightening force within the clinical range of the abutment screw of the implant dental prosthesis was found to have no problem with the stability of the supporting bone and the abutment screw.
Objectives: The purpose of the study is to investigate the relationship between oral health conditions and their subjective oral health perception in the elderly in Gimcheon. Methods: The study subjects were 214 elderly aged over 65 years old in Gimcheon. The study was carried out by direct interview method of from February 20 to 24, 2014. The oral examination was performed by the dentist base on the World Health Organization criteria including direct examination and observation. The questionnaire consisted of sex, type of family, use of medical services, and oral health behavior, The independent variable included three questions of the general characteristics of the subjects, two questions of use of medical services, and two questions of oral health behavior. The subjective oral health perception was composed of heathy and unhealthy. The objective oral health condition was evaluated by number of residual teeth, FT index, MT index, and DMFT index. Results: In the elderly, the number of residual tooth was $8.89{\pm}9.72$ and the number of decayed teeth was $0.03{\pm}0.20$. The numbers of missing teeth and filled teeth were $19.26{\pm}9.65$ and $0.28{\pm}1.01$, respectively. The DMFT index was $19.57{\pm}9.28$. In relation to the subjective oral health perception, 76.6% answered 'good' and 23.4% answered 'bad'. The subjective oral health perception showed a weak quantitative linear relationship of r=0.235 with the number of residual tooth. the subjective oral health perception showed a weak negative linear relationship(p<0.01) of r=-0.225 with the number of missing teeth and r=-0.217 with DMFT(number of decayed missing and filled teeth) index.
Park, Hyun-Jung;Cha, Eun-Shil;Kong, Kyoung-Ae;Lee, Won-Jin
Journal of Technologic Dentistry
/
v.30
no.2
/
pp.121-133
/
2008
The purpose of this study was to evaluate the role of socioeconomic factors and health behaviors on the prevalence of oral diseases(dental caries and periodontal disease) among Korean adults. Data from the 2005 National Health and Nutrition Examination Survey was analyzed for adults aged over 19 years (n=25,215). Oral disease was defined as disease diagnosed by a dentist for the previous 12 months. Chi-square test and logistic regression analysis were used to conduct statistical analysis. The population without dental caries and periodontal diseases were used as the reference category for all analysis. The overall prevalence of annual dentist-diagnosed dental caries and periodontal diseases were 23.5% and 10.6% respectively. The relative risk of developing dental caries for graduates of middle school and lower were 1.53 times (95% CI: 1.24-1.89) more likely to develop dental caries comparing to college graduates. Low income earners were 1.23 times(95% CI: 1.01-1.49) more likely to develop dental caries than high income earners. Persons covered by national medical insurance were 1.45 times(95% CI: 1.08-1.95) more likely to develop dental caries comparing to persons covered by employee medical insurance. Compared with persons not eating snacks, the risk of developing caries in persons eating snacks once a day was 1.16(95% CI: 1.01-1.32), while those who snacked twice or more a day were 1.19(95% CI: 1.01-1.41). The relative risk of developing periodontal disease was 3.71(95% CI: 2.38-5.80) higher in older individuals than younger. In terms of education level, middle school graduates and lower were 1.54 times more likely to develop periodontal disease than college graduates. Low income earners were 1.47 times more likely to develop periodontal diseases than high income earners. Using data from a large, nationally representative sample of Korean populations, we support the hypothesis that the prevalence of oral diseases is related with socioeconomic factors and health behaviors. More intensive intervention efforts to reduce the prevalence of dental diseases are warranted in Korea.
An aim of this study is to find out influenced factors of satisfaction degree on the clinical practice for the dental technology student and it can be provided the basic necessary data for the educational planning of the curriculum for the clinical practice. The target of study are selected form 7 junior health college students and colleges are located in around seoul form 14 junior health college throughout the nation. The questionnaries were distributed between 24th Feb to 30th July in 1997 to the 100 dental technicians who finished clinical practice and entered profession in 1997. All collected data were analysed by using SPSS/PC, Technical Statistic, One-Way ANOVA, Ttest, Person Correnlation Coefficient, Chrobach Alpha Coefficient and the result of the study is follow. 1) The satisfaction degree were classificated as 7 aspect and overall average score was 3.042. During that period satisfaction of personal relation aspect(M=3.737) shows highest level. Satsfiaction of clinical parctice(M=3.571) shows as second, Satisfiaction of environment(M=3.028), Satisfaction of guidance(M=2.915), satisfaction of subject are ordered of their scores. According to above study satisfaction's degree of subject show lowest level. 2) According to the result of verification of study. general character of student and satisfiaction degree has not much relation with sex, location of college, religion, period for enrolling college, teaching method of clinical practice. But the result show similar relation with following items. Satisfaction if subject and satisfaction of clinical practice(P=0.000), place of clinical practice and satisfaction of clinical practice(P=0.002), Academic record of college and satisfaction of clinical practice(P=0.000). 3) The relation of satisfaction(Subject, method of teaching, environment, period, rating, personal relation) of clinical practice and age of investigation's target Older student show higher satisfaction(P=0.040). Also method of teaching, environments, period, rating, personal relation has similarities with satisfaction. Therefore student who has higher satisfaction of clinical practice they also have higher rate for subject, environment, period, personal relation. 4) The result fo investigation, most interesting subject was crown & bridge and most difficult factor was too many simple-works to the student. One of ideal factor was discussing with counselor before they choose place for clinical practice. Third grade and first semester is most efficient time for clinical practice and 8 week is proper period for clinical practice. Clinical practice is absilutory mecessary and we find out most student rated positively. However we need more specific study about satisfcation of each subject. Because it shows lowest level and we need more pay attention for planning of clinical practice.
This study was aimed to help the construction of esthetic dental prosthesis by investigation of the factors affecting on the atterition position and attrition angle of maxillary lateral incisors. Therefore 197 complete cast of maxillary and mandibualar extracted form the student of K. college were subjected for this study, and result throught the study are as follows. 1. None attrite rate of the maxiilary right lateral incisors was about 16.2% and that of the maxillary left lateral incisors was about 32.4% of examined teeth. 2. Throught mesiodistal attrition area 1) It showed that right lateral incisors was the most frequence in attrition of mesial area of incisal edge, and left lateral incisors was the most frequence in attrition of mesial and mid area of incisal edge. 2) It showed that square type arch was more frequence in attrition of all incisal edge, and ovoid type arch was more frequence in the attrition of mid area of incisal edge, and ovoid type arch was more frequence in the attrition of mid area of incisal edge, and taper type arch was more frequence in the attrition of mesial area of incisal edge than it of average frequence of right lateral incisors, by dental arch type. 3) It showed that square type arch was more frequence in the attrition of all area and mid area of incisal edge, and ovoid type arch was more frequence in the attrition of mid area of incisal edge, and taper type arch was more frequence in the attrition of mesial and distal area of incisal edge than it of average frequence of left lateral incisal, by dental arch type. 4) Sex, vertical overlap, horizontal overlap, incisal guide angle, did not affect significantly to throughout mesiodistal attrition, statistically 3. Throughout labiolingual attrition quantity. 1) It showed that throughout labiolingual attrition quantity was more attrition in order of taper type arch < ovoid type arch < square type arch, by dental arch type. 2) It showed that throughout labiolingual attrition qauntity was more attrition when the length of horizontal overlap is shorter than it of other, by horizontal overlap. 3) Throughout labiolingual attrition quantity of right lateral incisors showed that male was more attrition than it of female. 4) Vertical overlap, incisal guide angle, sex on left lateral incisors did not affect significantly to throughout labiolingual attrition, statistically. 4. Attrition angle 1) It showed that average attrition anlge of right lateral incisors were $30{\pm}13.02$ degree, and it of left lateral incisors were $26{\pm}13.37$ degree. 2) It showed that taper type arch have a bigger attrition angle than it of average of lateral incisors, and square tape arch have a smaller attrition angle than it of average of lateral incisors, by dental arch type. 3) It showed that horizontal overlap of 2.1mm above have a bigger attrition angle than it of average, by horizontal overlap. 4) It showed that female have a bigger attrition angle it of male, by sex.
Purpose: Zirconia blocks for all ceramic dentures are divided into two groups. One is pre-heated block and the other is binder added block. In this study, the possibility of recycling the remained parts of binder added block after CAD/CAM machining with slip casting process was investigated. Methods: Owing to the binder added block contain large amount of organic matter, Binder burn-out was must be carried out before ball milling for preparing the casting slip. Binder burn-out was accomplished at $600^{\circ}C$ for 10 hours. Ball milling was performed with 5mm zirconia ball and 60mm polyethylene bottle. From 0% to 5% at 1% intervals of alumina was added to zirconia powder for preparing slip. Solid casting was achieved with plaster mold. Cast bodies were dried and sintered at $1,500^{\circ}C$ for 1 hour. Linear shrinkage, apparent porosity, water absorption, bulk density, and flexural strength were tested. Microstructures were observed by SEM, EDS and XRD analysis were executed. Results: Optimum slips for casting was prepared with 300g ball, 100g powder, and 180g distilled water. Cast body without alumina showed 26% of linear shrinkage, 6.07 of apparent density, and 470MPa of three point bend strength. On the other hand, as received zirconia block, which was sintered at the same conditions, showed 23% of linear shrinkage, 6.10 of apparent density, and 680MPa of three point bend strength. When 3% of alumina was added to zirconia, sintered body showed 23% of linear shrinkage, 6.10 of apparent density, and 780MPa of three point bend strength. SEM photomicrographs and EDS analysis showed alumina particles uniformly dispersed in zirconia matrix, and XRD analysis showed no phase transformation of tetragonal zirconia particles was occurred when alumina was added. Conclusion: According to the all of this experimental results, 3% of alumina added cast zirconia body showed excellent mechanical properties more than as received binder containing zirconia block.
This study was the study verifying dental technicians' motivation and job satisfaction in Seoul through the positive method as well as its purposes were to investigated the effect of dental technicians manpower supply/demand prospect on motivation, job satisfaction and the effect of other job satisfaction factors on dental technicians motivation and job satisfaction. For then, general characteristics of study objects were classified by sex, married/unmarried, age, career, salary, highest level of education, working place, position and job as well as job satisfaction factors were classified with future supply/demand prospect, future prospect, working hours, working environment and salary. We conducted a frequency analysis, crossing analysis and multi-linear regression analysis about the effect of the classified articles on motivation and job satisfaction. Also, for verifying the relationship of motivation and job satisfaction, we conducted correlation analysis and its result is as followed. First, it showed that the job related with making orthodontic appliance influenced on motivation, among the age, career and job of the general characteristics, and other jobs between working place and job influenced on job satisfaction. Second, the dark future prospect was showed to influence on motivation and job satisfaction highly so we could grasp that negative opinions are included in that. And low-paying was showed to highly influence on job satisfaction s fall so we could grasp the subjective low-salary standard at the present. But we expected that the manpower supply/demand prospect would influence on motivation and job satisfaction but there was little influence. Third, the correlation between motivation and job satisfaction was showed to be somewhat high, motivation had the standard which is above average and job satisfaction had the standard which is below the average. So with a little improving of job satisfaction, it s possible that motivation can be very high. Therefore, in rapidly changing generation, we think that the dental technicians are actively coping with the reality of low-paying and high-working. But it's implying that anxiety for uncertain future was reflected. Furthermore, because institutional strategies for dental technicians' efficient management are insufficient in relation with policies so it's necessary the policy consideration for solve the job-unsatisfying factors actively.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.