• 한국치위생학회지
• /
• 제16권4호
• /
• pp.635-641
• /
• 2016

Objectives: The purpose of this study is to assess the characteristics of tooth surface after using Gracy curet and Ultrasonic scaler Methods: In this study, 12 teeth extracted were used. 12 specimens were divided into three groups with the same numbers, which were classified into Control group, Gracy curet use group, and Ultrasonic scaler use group, and after performing instrument operation, we measured the roughness and the loss degree of tooth surface by using SEM. Results: In groups using Gracy curet and Ultrasonic scaler, the roughness and the loss of tooth surface increased significantly(p<0.05). In the roughness of groups using Gracy curet and Ultrasonic scaler, Ultrasonic scaler group was higher in crown, but Gracy curet group was higher in root. As a result of observation through SEM, the roughness and the loss degree increased in order of Control group, Ultrasonic scaler use group, and Gracy curet use group. Conclusions: Taken together above results, both hand instrument and ultrasound equipment create roughness and loss in crown and in root, and hand instruments makes rougher than ultrasonic instruments in root, so it is thought to require thorough and accurate technical application not to damage tooth surface when removing plaque.

• Journal of Periodontal and Implant Science
• /
• 제46권2호
• /
• pp.107-115
• /
• 2016

Purpose: The aim of this study was to evaluate and compare tooth surface characteristics in extracted human molars after cervical enamel projections (CEPs) were removed with the use of three rotating instruments. Methods: We classified 60 extracted molars due to periodontal lesion with CEPs into grade I, II, or III, according to the Masters and Hoskins' criteria. Each group contained 20 specimens. Three rotating instruments were used to remove the CEPs: a piezoelectric ultrasonic scaler, a periodontal bur, and a diamond bur. Tooth surface characteristics before and after removal of the projections were then evaluated with scanning electron microscopy (SEM). We analyzed the characteristics of the tooth surfaces with respect to roughness and whether the enamel projections had been completely removed. Results: In SEM images, surfaces treated with the diamond bur were smoothest, but this instrument caused considerable harm to tooth structures near the CEPs. The piezoelectric ultrasonic scaler group produced the roughest surface but caused less harm to the tooth structure near the furcation. In general, the surfaces treated with the periodontal bur were smoother than those treated with the ultrasonic scaler, and the periodontal bur did not invade adjacent tooth structures. Conclusions: For removal of grade II CEPs, the most effective instrument was the diamond bur. However, in removing grade III projections, the diamond bur can destroy both adjacent tooth structures and the periodontal apparatus. In such cases, careful use of the periodontal bur may be an appropriate substitute.

• 한국치위생학회지
• /
• 제12권4호
• /
• pp.675-684
• /
• 2012

Objectives : The purpose of this study was to develop an instrument for Korean Scaling Fear (KSF)-1.1 in scaling patients. Methods : 402 sample size for scaling patients was studied in Daegu city in July and August of 2011. Mean and standard deviation was calculated in 3 dimensions(FWS: fear while scaling, DDH: distrust on dental hygienist, FAS: fear after scaling). Results : Age of 402 subjects was 36.5 years. In analyzing reliability for item-level, a range of correlation coefficient(${\alpha}$) on item-internal consistency(FWS, DDH, and FAS) was 0.58~0.88(${\alpha}$=0.90), 0.40~0.71(${\alpha}$=0.82), and 0.54~0.63(${\alpha}$=0.82), respectively. Floor(%) and ceiling(%) value on 3 dimensions were also 9.2% and 4.0%, 12.4% and 0.5%, and 17.7% and 1.2%, respectively, therefore, we found statistically high reliability for those(p<0.001). With explanatory factor analysis, this study could generate 3 dimensions(factor 1, eigenvalue 5.41, proportion 0.49; factor 2, eigenvalue 1.50, proportion 0.14; factor 3, eigenvalue 1.04, proportion 0.09) and 11 sub-scales. Also confirmatory factor analysis results showed that the KSF1.1 model was fitted very well in analysis of model fit($x^2$=112.94, df=41, p=0.000; goodness of fit index=0.95; adjusted goodness of fit index=0.92; root mean square residual=0.057). Conclusions : In conclusion, The findings of this study showed that developed reliable and valid instrument for measuring the KSF1.1 in the scaling patients.

• Safety and Health at Work
• /
• 제2권4호
• /
• pp.348-354
• /
• 2011

Objectives: This cross-sectional study was performed in the Dental School of Prince of Songkla University to ascertain noise exposure of dentists, dental assistants, and laboratory technicians. A noise spectral analysis was taken to illustrate the spectra of dental devices. Methods: A noise evaluation was performed to measure the noise level at dental clinics and one dental laboratory from May to December 2010. Noise spectral data of dental devices were taken during dental practices at the dental services clinic and at the dental laboratory. A noise dosimeter was set following the Occupational Safety and Health Administration criteria and then attached to the subjects' collar to record personal noise dose exposure during working periods. Results: The peaks of the noise spectrum of dental instruments were at 1,000, 4,000, and 8,000 Hz which depended on the type of instrument. The differences in working areas and job positions had an influence on the level of noise exposure (p < 0.01). Noise measurement in the personal hearing zone found that the laboratory technicians were exposed to the highest impulsive noise levels (137.1 dBC). The dentists and dental assistants who worked at a pedodontic clinic had the highest percent noise dose (4.60 ${\pm}$ 3.59%). In the working areas, the 8-hour time-weighted average of noise levels ranged between 49.7-58.1 dBA while the noisiest working area was the dental laboratory. Conclusion: Dental personnel are exposed to noise intensities lower than occupational exposure limits. Therefore, these dental personnel may not experience a noise-induced hearing loss.

• 한국치위생학회지
• /
• 제16권4호
• /
• pp.549-557
• /
• 2016

Objectives: The purpose of the study is to investigate the influence of education service quality on major satisfaction in the dental hygiene students. Methods: A self-reported questionnaire was completed by 271 dental hygiene students in Seoul from April 1 to 20, 2016. The questionnaire consisted of general characteristics of the subjects(6 items), education service quality (27 items), and major satisfaction of students(23 items). The instrument for education service quality was adapted from Parasuraman and modified by Park & Lee. Likert 5 point scale adaptation included physical environment, reliability, responsiveness, certainty, empathy, class professors, administrative facilities, and school activities accessibility. Cronbach's alpha test in the study was 0.956 in education service quality and 0.951 in major satisfaction. Results: The education service quality was 3.1 points. The lower grade students tended to have the higher education service quality (p<0.001). The satisfaction to class professors was 3.2 points. The education service quality had a significant positive relation to major satisfaction. The satisfaction was positively influenced by physical environment, responsiveness, certainty, and empathy. Conclusions: A positive motivation to education service quality leads to major satisfaction. A variety of strategies are very important to enhance the education specialization.

• 구강회복응용과학지
• /
• 제27권1호
• /
• pp.99-107
• /
• 2011

비외과적 재근관치료의 주된 목표는 치근주변의 치유를 위하여 근관 공간을 완전히 멸균하는 것이며, 이 목표를 달성하기 위해서는 이전 충전물질의 완전한 제거가 요구된다. 전통적으로 근관충전물질의 제거는 스테인리스스틸 수기구를 통해서 이루어져 왔으며 이는 시간과 노력이 많이 소요되는 작업이다. 최근 보다 효율적인 근관충전물질의 제거를 위해 재치료용 회전식 NiTi 기구가 소개되었다. 이 연구에서는 만곡된 근관에서의 스테인리스스틸 수기구, ProTaper Universal Retreatment (Dentsply Maillefer, Ballaigues, Switzerland), Mtwo retreatment (Sweden & Martina, Padova, Italy)의 gutta-percha 제거 효율을 비교하였다. 재치료 후 근관 내 남겨진 gutta-percha의 양은 실험군 사이에 유의한 차이가 발견되지 않았다. 하지만 재치료에 소요된 시간은 재치료용 회전식 NiTi 기구를 이용한 실험군에서 더 적게 소요되는 것으로 나타났다.

• 한국치위생학회지
• /
• 제14권6호
• /
• pp.895-902
• /
• 2014

Objectives: The purpose of the study was to investigate the actual oral health status and dental fear level in the elderly. Methods: Data were collected by questionnaire interview method from June 15, 2013 to December 14, 2013. The subjects were elderly over 65 years old in Jeonbuk province. The study instrument was structured questionnaire including general characteristics of the subjects(3 questions), oral health management status(16 questions), Dental Fear Survey(DFS, 9 questions). Cronbach alphas were 0.804 and 0.959 in the study. Higher score of oral health management status showed good oral health care and higher DFS showed higher level of dental fear. Data were analyzed by t-test, one way ANOVA, post-hoc Scheffe test, and Pearson correlation analysis. Higher dental fear was defined below 33.3%. Results: Women tended to have better oral health than male. Women brush their teeth more frequently than male. Most of the elderly answered that it was important to brush teeth for 3 minutes, to use dental floss and to have oral health education(p<0.05). Score of dental fear level was similar in men and women. Those who were above 69 years old tended to have dental fear. Poor oral health condition was closely related to dental fear. Conclusions: The oral care in the elderly showed considerable differences between the groups and affected the dental fear. It is important to implement the nationwide dental care for the elderly in the future.

• 대한치과기공학회지
• /
• 제28권1호
• /
• pp.177-198
• /
• 2006

This study purposed to offer basic data for safety education of the dental laboratory technology after the investigation of how much the students in the dept. of dental laboratory technology are aware of the danger of each instrument, equipment or laboratory procedure that they use during laboratory and how much they demand safety education for this. The objects for this study were 423 students who were in the dept. of dental laboratory technology. In this regard, four colleges which have the dept. of dental laboratory technology were randomly selected to do a questionnaire survey. SPSS 12.0 was used to analyze the collected data. The results were as follows: As for satisfaction with their major, the respondents answered Satisfied (59.1%), Average (35.5%) and Dissatisfied (5.4%). In terms of the production process of a partial denture, they considered casting, polishing the casting body, polishing denture and burn out were most dangerous in order. As for the production process of a full denture, what they regarded as the most dangerous in order was polishing denture, deflasking and wax wash. Regarding the laboratory procedures of porcelain material, casting, trimming casting body, polishing porcelain material and burn out were the most dangerous procedures that they perceived. With regard to materials for use, alcohol, polishing, metal and wire were the most dangerous ones they thought. As for the handling characteristics of each material, small towns showed a higher demand for safety of the handling characteristics of alcohol. In terms of school year and sex, juniors and girls had higher scores in the demand for safety of the handling characteristics of acid. Regarding the handling characteristics of each equipment and instrument, all of small towns, juniors and girls showed the highest demand for safety of the handling characteristics of alcohol lamps. With regard to scores in the demand for safety of other characteristics, all of small towns, juniors and girls had the highest demand for safety of emergency treatment. Concerning the demand for safety education by the completion of safety education, in terms of each material, highest was the demand for safety of acid from the group which completed safety education. In regard to equipments and instruments, when it came to the demand for safety of the handling characteristics of casting machine, the educated group's demand for safety of acid was higher. Regarding other characteristics, the group which was not educated gained higher scores in the demand for safety of emergency treatment. 11. In all areas(materials, machines and others), small towns, girls and juniors showed higher scores in the demand for safety. Based on the above results, it was found that when students conduct the laboratory of dental technology, they would think that many materials, instruments or equipments for use are very dangerous. However, safety education was not fully given to them. Regarding the scores in the damned for safety education, the highest was 4.16 and the lowest was 3.43, which suggests that the scores were generally very high. In this regard, it is necessary to continue delivering a systematic safety education of materials, equipments or instruments used during the laboratory of dental technology. Therefore, through the analysis of each material, instruments or facility used in every laboratory and each process, safety accident types and accident risk factors should be investigated to develop educational materials for this. Moreover, it is required to open safety education as a single course of study or insert safety contents of all materials and machines into the class of dental laboratory instrument or dental materials for the purpose of a systematic and thorough safety education to prevent a safety accident during laboratory.

• 치위생과학회지
• /
• 제7권4호
• /
• pp.263-269
• /
• 2007

치과진료실에서의 감염방지 실태를 분석하여 향후 치과진료실에서의 감염방지 수준을 향상시키기 위한 방안을 제시하고자 대구광역시 소재 치과 병 의원에 근무하는 치과의사 50명, 치과위생사 176명, 간호조무사 100명을 대상으로 감염방지 교육 및 감염성 관리 실태를 분석한 결과는 다음과 같다. 1. 건강검진 실시율은 치과의사가 가장 높았고, 예방접종 실시율은 치과위생사가 가장 높았다. 2. 감염방지 교육 경험률은 치과의사가 가장 높았고, 간호조무사가 가장 낮았다(P < 0.05). 3. 개인용 보호장비 착용률은 치과의사가 가장 높았고, 간호조무사가 가장 낮았다(P < 0.05). 4. 진료 후 손 세척 시행률은 치과의사가 가장 높게 나타났다(P < 0.05). 5. 기구의 멸균 및 소독 시행률은 치과위생사가 다른 두 집단에 비해 높았다. 6. 장비의 표면 소독은 진료용 선반 위주로 시행하고 있는 것으로 나타났으며, 치과위생사 의 실천률이 높았다.

• 대한통합의학회지
• /
• 제4권4호
• /
• pp.83-90
• /
• 2016

Purpose : Recommended posture according to the location of operating teeth have been standardized in dental clinic to prevent musculoskeletal disorder. However, clinicians do not comply with this rule in many cases. This study investigated the effects of operating posture on cranio-cervical range of motion (CROM) and muscles activity of neck and upper extremity. Methods : Sixteen healthy dental hygiene students were participated. During operating posture (3 recommended and 3 experimental postures which were set front, side, back, respectively), CROM in the fronal and sagittal plane were measured by Cervical Range of Motion Instrument and muscle activities of Sternocleidomastoid, upper trapezius, middle deltoid, extensor carpi radialis, brachioradialis, and abductor pollicis brevis were measured by Pocket EMG system. Result : CROM were significantly decreased in recommended posture in comparison with experimental posture (p<.05). In addition, muscle activity of middle deltoid was significantly decreased in recommended front posture. Moreover, brachioradialis and extensor carpi radialis showed the same result in recommended back posture (p<.05). Conclusion : Recommended posture is close to neutral posture and to reduce muscle fatigue and overuse, which may considered as a preventing musculoskeletal disorder and partially explain its efficacy in dental clinic.