• Proceedings of the IEEK Conference
• /
• 2000.11b
• /
• pp.83-86
• /
• 2000

This paper describes a delay-locked loop(DLL_) with low-jitter using Vernier Method. This DLL can be used to synchronize the internal clock to the external clock with very short time interval and fast lock-on. The proposed circuit was simulated in a 0.25 $\mu\textrm{m}$ CMOS technology to realize low-jitter. We verified 50-ps of time interval within 5 clock cycles of the clock as the simulation results.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.3
• /
• pp.457-462
• /
• 2016

In this paper, we consider the stability of time-delayed linear systems. To derive an LMI form of result, the integral inequality is essential, and Jensen's integral inequality was the best in the last two decades until Seuret's integral inequality is appeared recently. However, these two are proportional to the inverse of integration interval, so another integral inequality is needed to make it in the form of LMI. In this paper, we derive an integral inequality which is proportional to the integration interval which can be easily converted into LMI form without any other inequality. Also, it is shown that Seuret's integral inequality is a special case of our result. Next, based on this new integral inequality, we derive a stability condition in the form of LMI. Finally, we show, by well-known two examples, that our result is less conservative than the recent results.

• Proceedings of the IEEK Conference
• /
• 2001.06b
• /
• pp.281-284
• /
• 2001

This paper describes an analog multi-phase delay-locked loop (DLL) to solve the harmonic lock problem using current-starved inverter and shunt-capacitor delay cell. The DLL can be used not only as an internal clock buffer of microprocessors and memory It's but also as a multi-phase clock generator for gigabit serial interfaces. The proposed circuit was simulated in a 0.25${\mu}{\textrm}{m}$ CMOS technology to solve harmonic lock problem and to realize fast lock-on time and low-jitter we verified time interval less than 40 ps as the simulation results.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.10
• /
• pp.77-83
• /
• 2015

This paper suggests heuristic algorithm to obtain optimal solution of minimum number of delay aircraft in airport arrivals/departures problem. This problem can be solved only mathematical optimization method. The proposed algorithm selects the minimum delays capacity in various airport capacities for number of arrivals/departures aircraft in $i^{th}$ time interval (15 minutes). In details, we apply median selection method and left-right selection method. This algorithm can be get the optimal solution of minimum number of delay aircraft for sixes actual experimental data.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.5
• /
• pp.1311-1321
• /
• 2010

Sensor network is used to obtain sensing data in various area. The interval to sense the events depends on the type of target application and the amounts of data generated by sensor nodes are not constant. Many applications exploit long sensing interval to enhance the life time of network but there are specific applications that requires very short interval to obtain fine-grained, high-precision sensing data. If the number of nodes in the network is increased and the interval to sense data is shortened, the amounts of generated data are greatly increased and this leads to increased amount of packets to transfer to the network. To transfer large amount of packets fast, it is necessary that the delay between successive packet transmissions should be minimized as possible. In this paper, we propose SET(SendDoneEventbasedTransmission Technique)which reduces the delay between successive packet transmissions by using SendDone Event which informs that a packet transmission has been completed. In SET, the delay between successive packet transmissions is shortened very much since the transmission of next packet starts at the time when the transmission of previous packet has completed, irrespective of the transmission time. Therefore SET could provide high packet transmission rate given large amount of packets.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.2
• /
• pp.97-103
• /
• 2010

The four combustion stages in a diesel engine have close correlation among them. Especially, the ignition delay period has significant effect on the following combustion stage. And the period is also one of inevitable combustion processes in the diesel engine. For example, the diesel knocking is a well-known phenomenon due to the long ignition delay period. The interval of the ignition delay period is affected by the mixture formation process in the cylinder. However, in the case of the D.I. diesel engine, the available duration to make the mixture formation of air-fuel is very short. In addition, the means of the mixture formation mainly depends on the injection characteristics and properties of the fuel. It is difficult to make complete mixture. Therefore, an early stage of combustion is violent, which leads to the weakness of noise and vibration. In this study, using the visible engine, we measured the ignition delay period by photo sensor which detect occurrence of flame and presented the factors of the injection characteristics such as kinds of injection system, the injection pressure and the injection timing. The relation between the ignition delay period and cylinder pressure diagram which was concurrently obtained was also estimated.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.4
• /
• pp.266-276
• /
• 2001

Due to the rapid development of semiconductor technology, the complexity of VLSI circuits has heavily increased. With the increased densities of integrated circuits, several different types of faults can occur Thus, testing such circuits is becoming a sever problem. Delay testing can detect system timing failures caused by delay faults. However, the conventional delay fault coverage in terms of the number of detected faults may not be an effective measure of delay testing because, unlike a stuck-at-faults, the impact of a delay fault is dependent on its delay defect size rather than on its existence. Thus, the effectiveness of delay testing is dependent on the propagation delay of the path to be tested, the delay defect size, and the system clock interval. This paper proposes a new delay defect fault coverage that considers both propagation delay of the path to be tested and additional delay defect size. And the relationship between delay defect fault coverage and defect level is analyzed.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.4
• /
• pp.529-535
• /
• 2013

This paper considers the problem of robust stability for uncertain discrete-time interval time-varying delayed descriptor systems using any combinations of quantization and overflow nonlinearities. First, delay-dependent linear matrix inequality (LMI) condition for discrete-time descriptor systems with time-varying delay and quantization/overflow nonlinearities is presented by proper Lyapunov function. Second, it is shown that the obtained condition can be extended into descriptor systems with uncertainties such as norm-bounded parameter uncertainties and polytopic uncertainties by some useful lemmas. The proposed results can be applied to both descriptor systems and non-descriptor systems. Finally, numerical examples are shown to illustrate the effectiveness and less conservativeness.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.5A
• /
• pp.417-425
• /
• 2007

While the cyclic prefix lengths of downlink OFDMA(Orthogonal Frequency Division Multiple Access) systems are determined based on the maximum delay spreads encountered in cellular environments, the guard interval of uplink OFDMA systems should consider the timing offsets of uplink signals as well as the delay spread lengths. Especially in the cases of initial accesses, handovers, and considerable time elapsed without data transmissions between base and mobile stations in a large cell, uplink timing offsets can be large and a very long guard interval length may be required. In order to keep the small size of the cyclic prefix in uplink OFDMA systems, the systems require a method of extending the guard intervals for users with large timing offsets without affecting the cyclic prefix length of the system. This paper proposes a method extending the guard intervals of individual users in uplink OFDMA systems.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.2
• /
• pp.75-80
• /
• 2020

There are so many low power MAC protocols for wireless sensor network. IEEE802.15.4 among them has disadvantage of a large power consumption for synchronization. To save power consumption it use the superframe operation alternating sleep mode and awake mode. But latency is longer result from superframe operation. B-MAC can have shorter latency according to check interval. But transmitter consumes more power because of long preamble. And receiver is suffering from overhearing. In this paper, we use the adaptive check interval scheme[1] of B-MAC for enhancing the power consumption. Its maximum throughput and minimum delay is evaluated by comparing the proposed scheme with a typical single channel IEEE802.15.4.