• Journal of the Institute of Convergence Signal Processing
• /
• v.14 no.2
• /
• pp.136-146
• /
• 2013

In this paper, the residual delay compensation algorithm is proposed for FX-type KJJVC. In case of initial version as that design algorithm of KJJVC, the integer calculation and the cos/sin table for the phase compensation coefficient were introduced in order to speed up of calculation. The mismatch between data timing and residual delay phase and also between bit-jump and residual delay phase were found and fixed. In final design of KJJVC residual delay compensation algorithm, the initialization problem on the rotation memory of residual delay compensation was found when the residual delay compensated value was applied to FFT-segment, and this problem is also fixed by modifying the FPGA code. Using the proposed residual delay compensation algorithm, the band shape of cross power spectrum becomes flat, which means there is no significant loss over the whole bandwidth. To verify the effectiveness of proposed residual delay compensation algorithm, we conducted the correlation experiments for real observation data using the simulator and KJJVC. We confirmed that the designed residual delay compensation algorithm is well applied in KJJVC, and the signal to noise ratio increases by about 8%.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.6
• /
• pp.681-689
• /
• 2010

We will demonstrate a novel topology for the feedforward amplifier. This amplifier does not use a delay element thus providing an efficiency enhancement and a size reduction by employing a distributed element negative group delay circuit. The insertion loss of the delay element in the conventional feedforward amplifier seriously degrades the efficiency. Usually, a high power co-axial cable or a delay line filter is utilized for a low loss, but the insertion loss, cost and size of the delay element still acts as a bottleneck. The proposed negative group delay circuit removes the necessity of the delay element required for a broadband signal suppression loop. With the fabricated 2-stage distributed element negative group delay circuit with -9 ns of total group delay, a 0.2 dB of insertion loss, and a 30 MHz of bandwidth for a wideband code division multiple access downlink band, the feedforward amplifier with the proposed topology experimentally achieved a 19.4 % power added efficiency and a -53.2 dBc adjacent channel leakage ratio with a 44 dBm average output power.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.3C
• /
• pp.329-340
• /
• 2009

This paper proposes a novel code tracking scheme to track the fine code synchronization for BOC(pn,n) modulated spreading signals. The correlation function of BOC(pn,n) modulated spreading signals has been several peaks. In this paper, we observe that the correlation function in the advanced offset region remains almost unchanged, due to the multipath signals being received later than a line-of-sight signal. Based on this observation, we propose a novel code tracking scheme which is called the advanced region correlation (ARC) method for BOC(n,n) modulated spreading signals. And, we compare with the code tracking accuracy between the conventional and proposed methods in the static multipath and land mobile satellite system channels through the Monte-Carlo simulation. Then, base on the proposed scheme, we propose the generalized-ARC (ARC) scheme for BOC(pn, n) modulated spreading signals.

• Proceedings of the IEEK Conference
• /
• 2000.06a
• /
• pp.225-228
• /
• 2000

In this paper, a design of the reliable video-conference system using CTI(Computer Telephony Integration) technology is proposed. When video-conference is run on the current existing Internet, the transmission delay problem for voice data traffic can be frequently occurred. In order to transmit the real-time voice data through the Internet efficiently, some complicated algorithms such as CODEC(Code/Decode) should be applied. It can cause further excessive processing delay which can affect the overall performance. The voice traffic is usually transmitted through the reliable PSTN(Public Switched Telephone Network) in the CTI system. In this paper a new architecture, in which PSTN for voice traffic and Internet for video traffic are used at the same time instead of using Internet by itself, is proposed to relieve the problems on a video conference.

• Proceedings of the IEEK Conference
• /
• 2000.09a
• /
• pp.131-135
• /
• 2000

본 논문에서는 고성능 고정 소수점 DSP (Digital Signal Processor) 코어인 Vincent6 코어 [1]를 이용하여 ITU-T C.728 음성 부호화기를 실시간으로 구현하였다 G.728 은 16 kb/s전송률의 ITU-T표준 음성 부호화기이며, 입력신호는 8 kHz로 샘플링되며 샘플 당 16 bit 로 양자화된 PCM 신호이다. G.728 은 LD-CELP(Low Delay Code Excited Linear Prediction)라고도 하며, 알고리 듬 delay는 0.625ms 이다. Vincent6 DSP core 는 VLIW (Very-Long Instruction Word) 특성을 가지므로 다중 명령 (multiple instruction)을 수행할 수 있다 이를 위해서 G.728 annex G를 이용하여 고정 소숫점 연산으로 코드를 작성한 후, 이를 vincent6 어셈블리 코드로 구현하였다. 최종적으로 구현된 코드는 ITU-T 의 test vector 에 대 해 bit exact 한 결과를 보이며 34 MCPS (Million Cycles Per Second)의 계산량을 가지며 사용 메모리크기는 데이터 메모리가 약 9KByte, 프로그램 메모리가 약 57 KByte 이다.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.23 no.1
• /
• pp.120-125
• /
• 2015

Passengers and Airlines wish neither delay nor cancellation due to aircraft defects. However, about 1 delay or cancellation case occurs out of 100 departures worldwide whereas 1 quarter case does in Korean domestic industry. Independent LCC carriers in Korea have almost double case. Most cases are recovered by replacing aircraft components. Airlines have prepared the spare components based on the reliability data by manufacturers to rectify defects or perform preventive maintenances. The total value for initial spares including engine is 40% of the aircraft price when they operate less than 5 aircraft. The more airlines operate the aircraft, the less the ratio of the investment for spares reflecting the economy of scale. This study intends to suggest how to improve the efficiencies as well as the safety of LCC throughout parts pooling including engines.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.98-101
• /
• 1998

The intermodulation distortion(IMD) due to laser diode nonlinearity of an asynhcronous direct sequence code diviion multiple access(DS/CDMA) system in wireless-optical transmission system model is analzed. A third order polynomial is used to represent laser diode nonlinearity. In DS/CDMA system, only one harmonic of the third-order intermodulation term falls on the signal frequency band and influences the system performance characteristics. To cancel multi-user interference and nonlinear distortion in a DS/CDMA wireless-optical transmission system model, the simple transversal filter structure with N-taps of (N-1) tap delay of 1 chip time delay line is used. It is necessary to select an optimal modulation index that provides a maximum signal-to-noise ratio and the results are useful for CDMA system design.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.7
• /
• pp.1026-1030
• /
• 2015

In this paper, we propose a signal processing board of an optical delay simulator for evaluating a long-range laser range finder and a laser target designator. We improved the accuracy by applying the clock multiplication and the correction of error gradient. To evaluate the performance of the proposed method, we implemented a prototype board and performed experiments. As a result, we implemented the optical delay simulator with resolution less than 0.7m in measuring distance 60km and a standard deviation of 0.041m. The PRF code detection logic and generation logic have a stability less than 0.03% and 0.08% compared to the NATO standard, respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.8
• /
• pp.2043-2054
• /
• 1996

In this paper, Digital Delay Locked Loop(DDLL) is designed, implemented and analysed by experiment whose results show that it is possible to track the received signal by this scheme. Designed digital DLL has an advantage that it is not needed to maintain gain balance between early and late channels, which has been problem with an analog DLL. Also DDLL has more improved noise performance compared to analog DLL due to noise level limitation and noise cancellation characteristics. For various loop parameters, their effects on loop performance are analysed and simulated. Proposed DDLL is the first attempt as a digital approach in code tracking loop and it is expected to be a good reference for spread spectrum communication research.

• Explosives and Blasting
• /
• v.35 no.4
• /
• pp.10-18
• /
• 2017

In this study, Rock deformation at the artificially advanced face was investigated by using the finite element code relating to the split blasting conducted in urban area. The maximum principal strain according to the detonation pattern and the detonation delay time at the rock surface was compared with the modeled blast section. As a result, it was found that the maximum principal strain was observed a difference depending on the detonation pattern at the rock surface, and the detonation delay time was an important parameter in split blasting.