• Restorative Dentistry and Endodontics
• /
• v.24 no.4
• /
• pp.623-627
• /
• 1999

During canal instrumentation of a curved canal, restoring force of endodontic instrument remove more dentin from the inner wall of the curvature. This effect tends to straighten the canal and thus may significantly shorten the working length. This study was to determine the mean reduction in working length after instrumentation according to the curvature. The curvature of mandibular mesial root was determined before instrumentation. 30 canals were divided into 3 groups each 10 on the basis of degree of curvature. Experimental groups as follows. In group 1, canals having curvature from 15 to 20 degrees: in group 2, canals having curvature from 20 to 30degrees; in group 3, canals having curvature above 30 degrees. Experimental teeth in all groups were accessed, and their actual working length determined by passing a size 15 K-file(IAF) just through the minor apical foramen. The canals were sequentially enlarged to size 35 with ProFile .06 series. The change of working length was calculated by measuring the tip of IAF beyond apical foramen by using stereomicroscope. The change of canal curvature following instrumentation were measured using the Schneider technique. The results were as follows. 1. The greatest changes of curvature and working length were observed in the group 3 canals(P<0.05), next were group 2 canals and group 1 canals(P>0.05). 2. Group 1 canals showed a mean reduction in 1.61 degrees and length of 0.12m respectively(P>0.05). 3. Group 2 canals showed a mean reduction in 3.42 degrees(P<0.05) and length of 0.25mm(P>0.05) respectively. 4. Group 3 canals showed a mean reduction in 7.23 degrees(<0.05) and length of 0.64mm respectively(P<0.05).

• The Journal of Korea Assosiation for Disability and Oral Health
• /
• v.7 no.2
• /
• pp.107-114
• /
• 2011

Dental extraction is potentially stress-inducing in many disabled patient. The body's response to dental stress involves the cardiovascular system(an increase in cardiovascular workload), the respiratory organ and the endocrine system(change in metabolism). To minimize the stress, the stress reduction method was established. The obtained contents were as follows: (1) Recognize the patient's degree of medical risk, (2) Complete medical consultation before dental therapy, (3) Schedule the patient's appointment in the morning, (4) Monitor and record preoperative and postoperative vital signs, (5) Use psychosedation during therapy, (6) Use adequate pain control during therapy, (7) Short length of appointment : do not exceed the patient's limits of tolerance, (8) Follow up with postoperative pain/anxiety control, (9) Telephone the risk patient later on the same day that treatment was given. Though the stress reduction method above was applied to the dental extraction in disabled patients with the advanced infected teeth, the complications(syncope, shock, bleeding & infection, etc.) may be occurred. For prevention of complications associated with the extraction, the authors treated the advanced infected teeth with endodontic drainage and incision & drainage before extraction. The final extraction and wound closure were then done after about 3 weeks.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.37 no.4
• /
• pp.255-263
• /
• 2011

Introduction: Maxillomandibular fixation (MMF) is essential before surgery under general anesthesia in maxillofacial trauma patients. MMF is used basically to reconstruct the occlusion and occlusal stability to recover the facial shape and oral functions. The arch bar and wire is a traditional method for MMF, but it can not only bring pressure to the periodontal ligaments and teeth but also cause a penetrating injury to the surgeons. Materials and Methods: In this study, 198 patients with an open reduction using a manual reduction without MMF from September 2005 to May 2010 in Dankook University Dental Hospital were subjected to a follow-up evaluation during the postoperative 4 months periods. This study evaluated the incidence of complications according to the condition of the patient (gender, age), the state of bony union of the fracture sites and a numeric rating scale evaluation for postoperative pain scoring. Results: 1. The complications were classified into major and minor according to the seriousness, and the major complication rate was as low as 2.02%. Only 2 cases of re-operations (1.01%) were encountered. In the classification according to the fracture line, plate fracture was observed in both cases of mandibular symphysis fracture, and angle fractures and loosening of two screws were noted in the case of mandibular angle fracture. 2. The complication rate was similar regardless of gender and age. 3. The degree of bony union was satisfactory, and the complication rate was reduced as the bony union improved. 4. More patients complained of pain as the operation time was increased. Conclusion: The use of MMF is not always necessary if a skilled assistant is provided to help manually reduce the fracture site. Compared to other studies of mandibular fracture surgery using MMF, the complication rate was similar using only manual reduction and the patients' discomfort was reduced without MMF.

• Journal of the Society of Naval Architects of Korea
• /
• v.55 no.3
• /
• pp.205-214
• /
• 2018

This paper deals with the experimental study on the hygrothermal ageing effect to the strength of Carbon Fiber Reinforced Plastics (CFRP) materials for marine leisure boat manufactured by vacuum assisted resin infusion method. The experiments performed consist of tensile, flexural and shear tests according to American Society for Testing and Materials (ASTM) and Korean Industrial Standards (KS) test methods. Test coupons are varied from uni-directional(UD, $0^{\circ}$, $90^{\circ}$), Bi-Directional (BD), and Double-Bias (DB) carbon fiber fabrics in conjunction with epoxy resin. The results of tensile test show that tensile strength reduces significantly while not the same degree of reduction is observed for elasticity modulus with respect to the existence of hygrothermal ageing effect. This implies that the tensile strain induced from external load holds steady values but ultimate strength values change widely under hygrothermal ageing effect. In case of the flexural test, $0^{\circ}$ UD shows more strength reduction than $90^{\circ}$ UD while BD has reduced values in both flexural strength and elasticity modulus under hygrothermal ageing effect. It is learned that the bending strain induced from external load and ultimate strength values are reduced with respect to hygrothermal ageing effect. Shear test performed only on DB materials, and the results show marginal reduction in ultimate strength and moderate reduction in elasticity modulus. This means that the shear strain varies more than ultimate shear strength with respect to hygrothermal ageing effect. The experiment conducted in this paper clearly demonstrates the differences in material properties of the CFRP for the consideration of hygrothermal ageing effect. Findings obtained from this experimental study can serve as a fundamental input data for the realistic structural responses of marine leisure boat built in CFRP materials.

• Korean Journal of Community Nutrition
• /
• v.19 no.5
• /
• pp.425-435
• /
• 2014

Objectives: The purpose of this study was to develop a Na-reduction education program and apply it for cooks who prepare meals in day-care centers. To development of the program was based on increasing the self-awareness of salinity, eating behaviors and enforcing skills of low-Na cooking. Methods: The study was carried out from April to October in 2013, fifty five cooks participated in this program. The Na reduction program composed of 4 sessions of education which included a 90-minute lecture and self-reevaluation of personal salt-sensitivity degree and three low Na recipe cooking classes. In order to measure the effectiveness of the program, the pretest and posttest of salinity of the soups provided by day care centers was conducted at registration and 5 month after the program with the same menu. Results: After the conduct of the program, salimeter using rate was increased from 8.2% to 94.6% after the program and the other measuring instruments using rate was gradually increased. We observed that the score on eating behaviors increased 1.51 points from 38.80 to 40.31 after the intervention program (p < 0.001). Further, increased knowledge and skill provided by the intervention program resulted in improved Na-reduction cooking capability. According to the results from analyzing the soup salinity, the salinity in watery soup was significant reduced from 0.556 to 0.449 0.107 and soybean-paste soup was significant reduced from 0.669 to 0.551 after the intervention program (p < 0.001). Conclusions: As the result of fact, the intervention programs that was based on self-reevaluation, to enforce practical skill and consciousness was effective to serve low sodium menu at day care centers.

• Applied Chemistry for Engineering
• /
• v.22 no.6
• /
• pp.605-609
• /
• 2011

We study on the oxygen behavior of $V_2O_5/TiO_2$ catalysts in the $NH_3$-selective catalytic reduction (SCR) prepared by the ball milling processing. There are not any changes in crystal structure and surface area of the $TiO_2$ catalyst by ball milling, but the maximal reduction temperature decreased in $H_2$-temperature programmed reduction (TPR) analysis. Experimental observations with various concentrations of oxygen indicate that all catalysts showed a very low NOx conversion rate in the absence of oxygen and the reactivity of ball milled catalyst higher depending on the oxygen. It is occurred because the degree of participation of atmospheric oxygen and lattice oxygen is great than that of the not-milled catalyst.

• Journal of radiological science and technology
• /
• v.44 no.3
• /
• pp.225-229
• /
• 2021

The digital image such as medical X-ray and nuclear medicine field mainly contains noise distribution. The noise degree in image degrades image quality. That is why, the noise reduction algorithm is efficient for medical image field. In this study, we confirmed effectiveness of application for median modified Wiener filter (MMWF) algorithm for noise reduction in PET/MR image compared with median filter image, which is used as conventional noise redcution algorithm. The Jaszczak PET phantom was used by using 18F solution and filled with NaCl+NiSO4 fluids. In addition, the radioactivity ratio between background and six spheres in the phantom is maintained to 1:8. In order to mimic noise distribution in the image, we applied Gaussian noise using MATLAB software. To evlauate image quality, the contrast to noise ratio (CNR) and coefficient of variation (COV) were used. According to the results, compared with noise image and images with MMWF algorithm, the image with MMWF algorithm is increased approximately 33.2% for CNR result, decreased approximately 79.3% for COV result. In conclusion, we proved usefulness of MMWF algorithm in the PET/MR images.

• Korean Chemical Engineering Research
• /
• v.60 no.1
• /
• pp.62-69
• /
• 2022

Graphene has a large surface area to volume ratio and good mechanical and electrical property and biocompatibility. This study described the electrochemical deposition and reduction of graphene oxide on the surface of indium tin oxide (ITO) glass slide and electrochemical characterization of graphen-modified ITO. Cyclic voltammetry was used for the deposition and reduction of graphene oxide. The surface of graphen-coated ITO was characterized using scanning electron microscopy and energy dispesive X-ray spectroscopy. The electrodes were evaluated by performing cyclic voltammetry and electrochemical impedance spectroscopy. The number of cycles and scan rate greatly influenced on the coverage and the degree of reduction of graphene oxide, thus affecting the electrochemical properties of electrodes. Modification of ITO with graphene generated higher current with lower charge transfer resistance at the electrode-electrolyte interface. Glucose oxidase was immobilized on the graphene-modified ITO and has been found to successfully generate electrons by oxidizing glucose.

• Journal of the Korean Arthroscopy Society
• /
• v.10 no.1
• /
• pp.53-60
• /
• 2006

Purpose: This study is to analyze the clinical and radiological results after arthroscopic reduction and internal fixation of intra-articular fractures of lateral tibial plateau. Materials and Methods: The subject of the study are the 13 cases of the patients visited orthopedics surgery during March year 2000 to August year 2004 because of intra-articular fractures of lateral tibial plateau and were treated with arthroscopic reduction and internal fixation. X-rays and CT or MRI were both carried out to identify the precise pattern of fracture and the degree of depression which showed out to be all type 2 by Schatzker fracture classification. And in 9 of the cases, autogenous and allogenous bone grafts were given as bone loss were severe. The average age was 48, age group between 31 and 66, and average follow up period of about 38 months ($13{\sim}65months$). Radiological ratings were given by comparing the X-rays of degree of joint congruency before and after the operation, functional ratings by analyzing IKDC score and Lysholm score. Combined injuries observed after arthroscopy were posterior cruciate ligament injury in 1 case, meniscus injury in 4 cases and medial collateral ligament in 2 cases. Results: During follow up, X-rays showed well-maintained reduction of articular surface in all cases and no complications such as joint depression, fracture reduction loss, angular deformity or malunion were found. Average Lysholm score at last follow up was 87 points ranging from 65 to 97, in 8 of the cases excellent, 3 good, 1 fair and 1 poor according to Lynsholm classification. Average IKDC score was 92 (from 82 to 99). Conclusion: Not only does arthroscopic reduction of lateral tibial plateau fracture bring exact reduction of articular surface, but also, is considered to be a good way of operation to diagnose and treat combined injuries of knee joint using arthroscopy.

• Journal of Technology Innovation
• /
• v.27 no.2
• /
• pp.37-71
• /
• 2019

How has the passenger car's architecture evolved? In the meantime, the discussions on the car architecture have been mixed, i.e., integral, modular, and the coexistence of two types. Therefore, in this study, we aim to develop two indices can measure the degree of modularization of passenger car and its all modules using global trade data. By applying the indices to the framework of architecture positioning that reflects the hierarchical structure of a product, we examined that the degree of modularization of the passenger car architecture has been enhanced. Meanwhile, the degree of modularization differs across the modules that make up the car. Specifically, we observed the higher degree of modularization in front-end, cockpit and seat modules. Whereas, we found that body module had a relatively low degree of modularization. In particular, we observed that the platform of passenger car has notably modularized due to carmakers' efforts to achieve model diversification and reduction of cost and period in new product development at the same time. Interestingly, we showed that three modules, i.e., engine, chassis (relatively less modularized), and transmission (relatively highly modularized), had a different level of modularization, even if they commonly make up the platform. We contribute to the suggestion for analytical approaches that examine the degree of modularization and its progress longitudinally. In addition, we propose the necessity of decomposition of a system into elements in a study of product architecture, considering the possibly distinctive progress of modularization across the elements.