• Journal of the Korean Wood Science and Technology
• /
• 제48권2호
• /
• pp.231-244
• /
• 2020

As a way of finding value-added materials from waste medium density fiberboard (MDF), this study characterized cellulose nanocrystals (CNCs) isolated by ammonium persulfate (APS) oxidation using recycled MDF fibers. Chemical composition of the recycled MDF fibers was done to quantify α-cellulose, hemicellulose, lignin, nitrogen, ash and extractives. The APS oxidation was performed at 60 ℃ for 16 h, followed by ultrasonication, which resulted in a CNC yield of 11%. Transmission electron microscope images showed that rod-like CNCs had an average length and diameter of 167±47 nm and 8.24±2.28 nm, respectively, which gave an aspect ratio of about 20. The conductometric titration of aqueous CNCs suspension resulted in a carboxyl content of 0.24 mmol/g and the degree of oxidation was 0.04. Attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy clearly showed the presence of carboxyl group on the CNCs prepared by the APS oxidation. The change of pH of the aqueous CNC suspension from 4 to 7 converted the carboxyl group to sodium carboxylate group. These results showed that the APS oxidation was facile and CNCs had a one-step preparation method, and thus suggested an optimization of the oxidation condition in future.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 1993년도 추계학술발표회 초록집
• /
• pp.31-36
• /
• 1993

Three different methods were employed to measure the degree of aerial oxidation in coal and the resulting oxidation/weathering indices were applied to obtain kinetic parameters of aerial oxidation processes, The index (i.e., slurry pH, Free Swelling Index, weight gain) values were subjected to kinetic analysis based on power-law Arrhenius type reaction model. The results show that activation energy of the aerial oxidation in 20-29$0^{\circ}C$ is in the range of 12-16 ㎉/㏖ and the agreement among three techniques is remarkable. The first order kinetic model is suitable in describing low temperature aerial oxidation process, except in the FSI case where the zero order expression is the best one.

• Macromolecular Research
• /
• 제17권8호
• /
• pp.603-608
• /
• 2009

Novel ultra-high molecular weight polyethylene (UHMWPE)/zirconia composites were previously prepared by the in situ polymerization of ethylene using a Ti-based Ziegler-Natta catalyst supported on to the surface of zirconia, as a bearing material for artificial joints. Tribological tests revealed that a uniform dispersion of zirconia in UHMWPE markedly increased the wear resistance. The effects of zirconia content on the oxidation behavior of the ${\gamma}$-ray-treated UHMWPE/zirconia composite surfaces were examined. The oxidation index that estimates the oxidation degree as the content of total carbonyl compounds was monitored using Fourier transform infrared spectroscopy-attenuated total reflectance. The changes in the surface composition due to the oxidation were confirmed by electron spectroscopy for chemical analysis. The extent of oxidation decreased with increasing zirconia content, which was attributed to the increased crystallinity as well as the decreased polymer portion of the UHMWPE/zirconia composites.

• Carbon letters
• /
• 제13권1호
• /
• pp.39-43
• /
• 2012

The size and the physical properties of graphene oxide sheets were controlled by changing the oxidation temperature of graphite. Graphite oxide (GO) samples were prepared at different oxidation temperatures of $20^{\circ}C$, $27^{\circ}C$ and $35^{\circ}C$ using a modified Hummers' method. The carbon-to-oxygen (C/O) ratio and the average size of the GO sheets varied according to the oxidation temperature: 1.26 and 12.4 ${\mu}m$ at $20^{\circ}C$, 1.24 and 10.5 ${\mu}m$ at $27^{\circ}C$, and 1.18 and 8.5 ${\mu}m$ at $35^{\circ}C$. This indicates that the C/O ratio and the average size of the graphene oxide sheets respectively increase as the oxidation temperature decreases. Moreover, it was observed that the surface charge and optical properties of the graphene oxide sheets could be tuned by changing the temperature. This study demonstrates the tunability of the physical properties of graphene oxide sheets and shows that the properties depend on the functional groups generated during the oxidation process.

• 한국식품조리과학회지
• /
• 제20권1호
• /
• pp.81-85
• /
• 2004

This study was conducted to investigate the antioxidant activities of clove extracts in water, methanol and ether. The clove extracts, BHA and ${\alpha}$-tocopherol were added to each oil at a level of 200 ppm. The activities of the substrate oils and controls were tested under autoxidation and thermal oxidation conditions. The degree of the effects of the antioxidant activities under autoxidation condition were in the following order; ether extract 〉 methanol extract 〉BHA 〉 ${\alpha}$-tocopherol 〉 water extract = control group. The induction periods of the control, water, methanol and ether extracts, and BHA and ${\alpha}$-tocopherol were 9.5, 9.6, 10.7 11.8, 10.4 and 9.7 days, respectively. Under thermal oxidation condition, the methanol extract showed stronger antioxidant activity than those of the water and ether extracts. The antioxidant activity of the methanol extract was attributed to ${\alpha}$-tocopherol and BHA.

• Carbon letters
• /
• 제10권3호
• /
• pp.225-229
• /
• 2009

Thermal emissivity of commercial nuclear graphites (IG-110, PCEA, IG-430 and NBG-18) following changes in oxidation degrees were examined. Specimens were oxidized to 0%, 5%, and 10% in air flow of 5l/min at $600^{\circ}C$ using a furnace, and the thermal emissivities were measured using an infrared spectrum analyzer. The measuring temperatures for the thermal emissivity were $100^{\circ}C$, $200^{\circ}C$, $300^{\circ}C$, $400^{\circ}C$ $500^{\circ}C$. Also density and porosity of the specimens were observed to compare with thermal emissivity. Results showed that emissivity increased with oxidation, and the 10% oxidized NBG-18 showed the highest emissivity (0.890) which value is larger for 24% than the value of as-received specimen. Investigation of factors affecting the emissivity revealed that increases in the surface roughness and porosity due to oxidation were responsible for the increase in emissivity after oxidation.

• 한국재료학회지
• /
• 제13권12호
• /
• pp.825-830
• /
• 2003

Structural changes during oxidation of anisotopic mesophase carbon fiber(AMCFs) have been observed with TEM and XRD. It was shown that the AMCFs are three dimensionally stacked structure of turbostratic layers, and are non-homogeneous structure which consist of the highly ordered areas and the random areas. The $d_{ 002}$, Lc, and La of AMCFs which were measured by XRD were 3.44, 146, and $135\AA$, respectively. It was observed that the oxidation initiated at the random areas, because the $d_{002}$ / decreased to the value of 3.41 $\AA$ during initial oxidation stage. It was also observed that the La of the oxidized AMCFs increased up to 182 $\AA$ during the whole oxidation process, and the $d_{002}$ of that increases up to 9.44 $\AA$ when the burn-off is over the degree of 20%. Therefore, it was suggested that the micro-crystalline grew up by heat treatment effects during the fibers were oxidized, In addition, it was shown that there was difference in the measured value of La by XRD and TEM, in case of 39% oxidized fibers for example, the measured La was $ 165\AA$ by XRD and in the range of 180∼220 $\AA$ by TEM.

• 한국해양바이오학회지
• /
• 제2권1호
• /
• pp.55-59
• /
• 2007

The oil and concentrated protein powder from squid viscera was extracted and recovered by a semi-batch supercritical carbon dioxide ($SCO_2$) extraction system and the degree of oxidation in the extracted oil was measured in order to compare with extracted oils using organic solvents. The degree of storage in treated squid viscera by $SCO_2$ extraction was measured in order to compare with untreated squid viscera. As results obtained, it was found that the auto-oxidation of the oils using $SCO_2$ extraction occurred very slowly compared to the oils by organic solvent extraction. And the treated squid viscera by $SCO_2$ extraction was reached the point of initial rottenness slowly than untreated squid viscera.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.327-328
• /
• 2006

We have demonstrated that textured $Al_2O_3-mullite-SiC$ nanocomposites can be fabricated by slip casting followed by partial oxidation - reaction sintering of mixed suspensions of $Al_2O_3$ and SiC powders in a high magnetic field. The sintered density was changed by the degree of oxidation at 1200C and 1300C. The degree of orientation of alumina in the nanocomposite was examined on the basis of the X-ray diffraction patterns and scanning electron micrographs. It is confirmed that alumina-oriented nanocomposites were fabricated. The three-point bending strength at room temperature was observed for the nanocomposites.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.455-456
• /
• 2006

We have demonstrated that textured $Al_2O_3-mullite-SiC$ nanocomposites can be fabricated by slip casting followed by partial oxidation. reaction sintering of mixed suspensions of $Al_2O_3$ and SiC powders in a high magnetic field. The sintered density was changed by the degree of oxidation at 1200C and 1300C. The degree of orientation of alumina in the nanocomposite was examined on the basis of the X-ray diffraction patterns and scanning electron micrographs. It is confirmed that aluminaoriented nanocomposites were fabricated. The three-point bending strength at room temperature was observed for the nanocomposites.