• Journal of Radiation Protection and Research
• /
• v.34 no.1
• /
• pp.9-14
• /
• 2009

High density polyethylene (HDPE) is degraded due to a radiation-induced oxidation when it is used as a neutron moderator in a neutron counter for a nuclear material accounting of spent fuels. The HDPE exposed to the gamma-ray emitted from the fission products in a spent nuclear fuel results in a radiation-induced degradation which changes its original molecular structure to others. So a neutron moderating power variation of HDPE, irradiated by a gamma radiation, was investigated in this work. Five HDPE moderator structures were exposed to the gamma radiation emitted from a $^{60}Co$ source to a level of $10^5-10^9$ rad to compare their post-irradiation properties. As a result of the neutron measurement test with 5 irradiated HDPE structures and a neutron measuring system, it was confirmed that the neutron moderating power for the $10^5$ rad irradiated HDPE moderator revealed the largest decrease when the un-irradiated pure one was used as a reference. It implies that a neutron moderating power variation of HDPE is not directly proportional to the integrated gamma dose rate. To clarify the cause of these changes, some techniques such as a FTIR, an element analysis and a densitometry were employed. As a result of these analyses, it was confirmed that the molecular structure of the gamma irradiated HDPEs had partially changed to others, and the contents of hydrogen and oxygen had varied during the process of a radiation-induced degradation. The mechanism of these changes cannot be explained in detail at present, and thus need further study.

• Korean Journal of Food Science and Technology
• /
• v.25 no.2
• /
• pp.98-104
• /
• 1993

In order to improve qualities of kochujang, various fruit juices such as apple, orange, pineapple and grape were added to the raw material of kochujang instead of the part of water. It was apparent in the kochujang with pineapple juice that organic acids originated from fruit juices increased titrable acidity and decreased pH. Free sugars and organic acids in the kochujang that was fermented during three months were degraded or might be used by microorganism after ten months of fermentation. Kochujang with grape juice showed relatively dark color, which had a good agreement with the changes of Hunter a-value. Sensory evaluation test about tastes, flavor and color showed that the kochujang with pineapple juice was preferred to others.

• Journal of Food Hygiene and Safety
• /
• v.26 no.1
• /
• pp.12-15
• /
• 2011

A method based on high-performance liquid chromatography (HPLC) with ultraviolet detection has been developed to quantify coenzyme Q10 (CoQ10) in raw materials and dietary supplements. Single-laboratory validation has been performed on the method to determine linearity, selectivity, accuracy, limits of quantification (LOQ) and repeatability for CoQ10. An excellent linearity (r=0.999) was observed for CoQ10 in the concentration range $15.625{\sim}500\;{\mu}g/ml$ in dietary supplement. Observed recovery of CoQ10 was found to be between 98.33 and 99.38%. LOQ was found to be $250\;{\mu}g/ml$ Repeatability precision for CoQ10 was between 0.15 and 0.21% relative standard deviation (RSD). Further, limited studies showed that some adulterants and degraded material could be satisfactorily separated from CoQ10 and identified.

• Transactions on Electrical and Electronic Materials
• /
• v.15 no.6
• /
• pp.328-332
• /
• 2014

Thin film transistors (TFTs) with an amorphous silicon zinc tin oxide (a-2SZTO) channel layer have been fabricated using an RF magnetron sputtering system. The effect of the change of excitation electron on the variation of the total interfacial trap states of a-2SZTO systems was investigated depending on sputtering power, since the interfacial state could be changed by changing sputtering power. It is well known that Si can effectively reduce the generation of the oxygen vacancies. However, The a-2SZTO systems of ZTO doped with 2 wt% Si could be degraded because the Si peripheral electron belonging to a p-orbital affects the amorphous zinc tin oxide (a-ZTO) TFTs of the s-orbital overlap structure. We fabricated amorphous 2 wt% Si-doped ZnSnO (a-2SZTO) TFTs using an RF magnetron sputtering system. The a-2SZTO TFTs show an improvement of the electrical property with increasing power. The a-2SZTO TFTs fabricated at a power of 30 W showed many of the total interfacial trap states. The a-2SZTO TFTs at a power of 30 W showed poor electrical property. However, at 50 W power, the total interfacial trap states showed improvement. In addition, the improved total interfacial states affected the thermal stress of a-2SZTO TFTs. Therefore, a-2SZTO TFTs fabricated at 50 W power showed a relatively small shift of threshold voltage. Similarly, the activation energy of a-2SZTO TFTs fabricated at 50 W power exhibits a relatively large falling rate (0.0475 eV/V) with a relatively high activation energy, which means that the a-2SZTO TFTs fabricated at 50 W power has a relatively lower trap density than other power cases. As a result, the electrical characteristics of a-2SZTO TFTs fabricated at a sputtering power of 50 W are enhanced. The TFTs fabricated by rf sputter should be carefully optimized to provide better stability for a-2SZTO in terms of the sputtering power, which is closely related to the interfacial trap states.

• Journal of radiological science and technology
• /
• v.2 no.1
• /
• pp.71-83
• /
• 1979

Not only the insulating oil used for extra high voltage and high capacity transformer has a lot of possibilites of a corona discharge in oil, but the oil is easily degraded by a response of light oxidization. This study is either to classfy, with priority given to a transformer oil produced in Korea belonging to, the insulating oil No. 2, the sample irradiated the ultraviolet rays, treated a corona discharge in oil by a high voltage DC source and done nothing, or to measure the characteristics of breakdown, V-i, I-t and electrode material. The obtained results can be summarized as followings: (1) Unless the sample is contacted with the air, on the process to irradiate the ultraviolet rays, the sample less influence on the changes of the electric characteristics. At the same time, if the sample is contacted with the air and irradiated the ultraviolet rays, the sample shows a remarkable changes of the electric characteristics, and a declined breakdown strength. This tells us that the influence of the light irradiation must be considered as a primary factor of degrading the insulating oil. (2) In the oil treated by a corona discharge, breakdown voltage is declined more than in the oil not to be treated with it. This means that the degradation of the insulating oil is getting increased by a corona discharge in oil. (3) It shows that the increase of conducting current has little to do with breakdown voltage. (4) The conducting current depending on the electrode materials can be put in order by value as Al>Cu>Fe. This is due to the differences of the work function of each metals, and an chemical reaction with the insulating oil. These result can be a great help in verifying the degradation progress of the insulating oil and furnish a new technical information to the manufacturers of the insulating oil and electrical equipment designers and operators. Besides, this study would be helpful to improve the electrical characteristics of the insulating oil produced in Korea.

• BMB Reports
• /
• v.30 no.1
• /
• pp.1-6
• /
• 1997

The ability of Hep-G2 cells to process $[^{125}I]LDL$ under basal conditions was investigated. The receptor-binding and internalization of $[^{125}I]LDL$ increased with the time of incubation in a saturable manner. After 4 h of incubation, 31.4 ng of $[^{125}I]LDL$ was cell bound. The cells rapidly internalized $[^{125}I]LDL$ via specific, receptor-mediated endocytosis. The amount of internalized $[^{125}I]LDL$ reached a maximun of 96.7 ng at 2 h of incubation and remained constant for the next 2 h. The rate of degradation of internalized $[^{125}I]LDL$ proceeded in a linear manner over the entire 4 h of incubation after an initial lag period. The effects of individial fatty acids (C18:0. C18:1, C18:2. and C18:3), differing in their degree of unsaturation. on the receptor-binding, internalization and degradation of $[^{125}I]LDL$ were also investigated. Inclusion of 1.0 mM of each fatty acid into the culture medium significantly increased $[^{125}I]LDL$ metabolism in Hep-G2 cells. Among the fatty acids tested, stearic acid had the least effect on the receptor-binding activity. There were no significant differences among the unsaturated fatty acids in LDL-receptor binding. The effect of individual fatty acids on the $[^{125}I]LDL$ uptake was similar to that of the receptor-binding. showing a significantly lower effect with stearic acid. The amount of degraded material of internalized $[^{125}I]LDL$ was the lowest with stearic acid when it was compared with unsaturated fatty acids.

• Korean Journal of Environmental Agriculture
• /
• v.29 no.2
• /
• pp.176-183
• /
• 2010

Endosulfan degrading ability of Klebsiella oxytoca KE-8 immobilized by entrapment with activated carbon was examined. Endosulfan degradation by the immobilized bacterial strains on several different activated carbon based support materials was investigated. Based on results, activated carbon ($8\times30$ mesh) was chosen as a support material. The immobilized Klebsiella oxytoca KE-8 with the cell density of 4 mg $g^{-1}$ (dry weight) degraded 22.18 ug $ml^{-1}$ endosulfan within 5 days at pH 7.0, $30^{\circ}C$ in batch shake flask cultures. Also, we an experimented recycle packed bed column mode and continuous packed bed column mode for endosulfan degradation. Under optimum operation condition, the immobilized cells in a laboratory scale pack bed column with support beads were able to degrade endosulfan completely in defined minimal salt medium at a maximum rate of 129.6 ug $ml^{-1}$ per day. Moreover, the endosulfan degradation activity could be demonstrated at $4^{\circ}C$ for one month without significant decrease in activity. Results of this study suggest that immobilized cells of Klebsiella oxytoca KE-8 might be applicable to endosulfan contaminated site.

• Progress in Superconductivity and Cryogenics
• /
• v.17 no.3
• /
• pp.37-40
• /
• 2015

Recently, the electrical insulation design for electrical apparatuses is important to cope with the tendency of high voltage. The degradation characteristics of a superconducting coil due to an electrical breakdown should be considered to design a high voltage superconducting coil. In this paper, the degradation characteristics of 2G high temperature superconducting (HTS) wires are studied with respect to electrical breakdown tests. To analyze the dependency of the degradation characteristics of 2G HTS wires, the electrical breakdown tests are performed with AC(alternating current) and DC(direct current) voltage. All tests are performed by applying various magnitudes of AC and DC breakdown voltages. To verify the degradation characteristics of 2G HTS wires, the tests are performed with various 2G HTS wires with respect to stabilizer materials. The degradation characteristics of 2G HTS wires, such as Ic(critical current) and index number are measured by performing electrical breakdown tests. It is found that the characteristics such as Ic and index number can be degraded by an electrical breakdown. Moreover, it is concluded that the degradation characteristics of 2G HTS wires are affected by the stabilizer material and applied voltages. The cross-sectional view of 2G HTS wires is observed by using a scanning electron microscope (SEM). As results, it is found that the degradation characteristics of 2G HTS wires are concerned with hardness and electrical conductivity of stabilizer layers.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.689-692
• /
• 2008

HSC(High Strength Concrete) have superior properties well as improvement in durability compared with normal strength concrete. In spite of durability of HSC, explosive spalling of concrete is serious problem in structure safety. Therefore, Solving methods are required to control the explosive spalling. The properties of concrete are affected by changes of temperatures. Compressive strength and elasticity modulus were degraded depending on a rise of temperatures. Also, change in microstructure and dehydration of concrete subjected to high temperatures. This paper is concerned with change in microstructure and dehydration of the alumino silicate fire protection materials at high temperatures. The testing methods of fire protection materials in high temperature properties are make use of SEM, TG-DSC and XRD. From the experimental test results, influence of high temperatures on microstructure of alumino-silicate fire protection material was identified, including chemical dehydration of C-S-H and CH. The chemical dehydration of CH under various temperatures from to 450 to 600$^{\circ}$C has been measured using the TG-DSC. However, developed alumino silicate fire protection materials showed good stability in high Temperatures. Thus, the results indicate that it is possible to fireproof panels, fire protection of materials.

• Journal of Environmental Science International
• /
• v.5 no.2
• /
• pp.153-170
• /
• 1996

Photosynthetic pigments and their degradation products in suspended and sinking particles collected from the Gulf of Mexico waters 1987~88, were measured using High Performance liquid Chromatography (HPIC). The short term variations in flux rates of chlorophylls and carotenoids as well as-their degradation products were compared at the mesoscale cyclonic and anticyclonic circulation features (cold joie rink and warm core ring). Chlorophyll a was the predominant porphyrin of suspended particulate matter at both CCR -and WCR. Among carotenoid pigments, 19'-hexanoyloxyfucoxanthin, which is a biomarker of prymnesiophytes, was dominant pigment at both rinds. Phaeophorbide a, which is produced through the Brazing processes of grazers, was the predominant degraded pigment in sinking particles ai the study aiea. Total pigment flux in CCR was an order of magnitude higher than that in WCR. Less than l% of the standing stock of the pigments measured sank out of the upper 200m of the WCR on any given day. Thus, suspended particulate matter in Gulf of Medico was not recycled rapidly.