• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.4-7
• /
• 1997

When we use Hadamard transform spectrometers (HTS), we can increase signal to noise ratio(SNR) by multiplexing which is done by masks. But if the mask has a single defective element, output-SNR decreases. In this paper the effect of a single defective element on the output-SNR is investigated. And a method of compensating for the defective mask element is presented.

• Journal of Korean Society for Quality Management
• /
• v.17 no.2
• /
• pp.47-54
• /
• 1989

This study is concerned with the reduction of fraction defective for quality improvement model in manufacturing system. For the methodology, a heuristic method for the selection of alternatives of process improvement is introduced for quality improvement and cost problem subject to cost constraints. This study suggests a model for selecting fraction defective reduction alternatives in multi-stage manufacturing system and a numerical example is presented.

• Proceedings of the Korean Reliability Society Conference
• /
• 2000.11a
• /
• pp.373-373
• /
• 2000

Bum-in procedures are developed far limited failure populations in which defective products fail soon after they are put in operation and non-defective ones never fail during the technological life of the products. The situation where products are produced from a production process with variable fraction defective is considered. Bum-in schemes guaranteeing pre-specified outgoing quality of products are derived using the mixed binomial prior distribution for the number of defectives in a batch.

• Korean Management Science Review
• /
• v.26 no.2
• /
• pp.61-70
• /
• 2009

This study gives the quality factor evaluation of rubber gloves manufacturing, including a systematic classification of poor durability(internal quality factors) and look bad(external quality factors) as well as the types of defective items, along with the relationship between quality factors and the defective types. The relationship analysis between quality factors and the defective types are performed with AHP(Analytic Hierarchy Process) technique. The results of our study will be useful for quality management activities and manufacturing process in rubber gloves manufacturing companies.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.4-4
• /
• 2009

Surface analysis on defective wire-bonding pads are performed in flash memory assembly. Week wire bonding may cause a significant effect on the final product reliability, and the surface condition of the aluminum bond pads is critical in terms of product reliability. To find out possible week bonding on semiconductor interconnects, ball sheer test (BST) has been performed. On some defective or week bonded pads, we have investigated the surface contents, assuming that the week bonding is induced from the surface conditions. AES and XPS are employed for the quantitative surface analysis on defective dies.

• Journal of Industrial Technology
• /
• v.36
• /
• pp.23-31
• /
• 2016

This paper presents EMQ models in which some proportion of defective items are produced and some of them are converted to good items through rework process and items not converted are disposed. Numerical models are developed for three cases of disposal and optimal solution of each model is derived. In the first model, if a defective item is found during the production process, only re-workable items are stored and reworked after normal production is finished. Not re-workable items are disposed immediately during normal production. The second model deals with the case where all defective items are stored and items to be disposed are determined in rework process. In the third model, an additional inspection process exists before rework to determine rework or disposal. Numerical examples are presented to validate the proposed models.

• ETRI Journal
• /
• v.36 no.2
• /
• pp.301-308
• /
• 2014

Three-dimensional integration technology results in area savings, platform power savings, and an increase in performance. Through-silicon via (TSV) assembly and manufacturing processes can potentially introduce defects. This may result in increases in manufacturing and test costs and will cause a yield problem. To improve the yield, spare TSVs can be included to repair defective TSVs. This paper proposes a new built-in self-test feature to identify defective TSV channels. For defective TSVs, this paper also introduces dynamic self-repair architectures using code-based and hardware-mapping based repair.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.34 no.1
• /
• pp.42-51
• /
• 2011

Poisson model and Gamma-Poisson model are popularly used to analyze statistical behavior from defective data. The methods are based on binary criteria, that is, good or failure. However, manufacturing industries prefer polytomous criteria for classifying manufactured products due to flexibility of marketing. In this paper, I introduce two multivariate Gamma-Poisson(MGP) models and estimation methods of the parameters in the models, which are able to handle polytomous data. The models and estimators are verified on defective pixels of LCD manufacturing. Experimental results show that both the independent MGP model and the multinomial MGP model have excellent performance in terms of mean absolute deviation and the choice of method depends on the purpose of use.

• Journal of Korean Society for Quality Management
• /
• v.9 no.2
• /
• pp.10-14
• /
• 1981

Products are assumed to be spoiled and not recoverable when the raw material below the prescribed weight level is charged in the mold. The raw material is autoscaled and their weight is normally distributed with a given variance. This paper describes an appropriate stochastic model of determining the optimum weight allowance and the associated defective rate for auto scale system. The optimum weight allowance and the defective rate which minimizes the total loss of defective and the excess weight allowance is obtained. A numerical example for the existing rubber company is also presented and evaluated.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.1 no.2
• /
• pp.107-113
• /
• 1997

Nondesructive test and structural analysis have been conducted to assess the safety of weld defective steel bridges in service. In the nondestructive test, using the radioactive ray and ultrasonic, the defective welding patterns in the steel bridges are identified. A major defective welding pattern is identified as the lack of welding area due to the insufficient welding penetration. By considering the welding defect in the above, structural analysis is conducted to evaluate the influence of welding defect on the safety of steel bridges. The results indicate that, due to the insufficient welding penetration, the stress obtained in the analysis is over the allowable fatigue stress level, and its influence on safety of the bridges is significant.