• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.6
• /
• pp.1323-1330
• /
• 2010

The amount of acoustic data gathered from the acoustic data gathering system is increased dramatically as the acoustic data gathering system become various and highly effective. It is needed to transmit this acoustic data to analysis environment for precise analysis. In this gathering/analysis system, it is also needed the stable transmitting as well as highly perfect security. But the existing system using the conveying method needs a lot of time. In case of using networks, the low speed networking vulnerable in the stable transmitting and the information security is impossible to materialize. In this paper, I would like to propose a transmitting and management system sending a massive gathering acoustic data in the unsecurity and low speed networking environment. The implemented system is to transmit the acoustic data safely in low speed networking environment and secure the acoustic data from various threats.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.6
• /
• pp.1218-1225
• /
• 2005

The effort to expand digital contents market and get more users is growing. This is being done by interconnecting the existing broadcasting data services and two-way data services in mobile network with the terrestrial DMB transmitting system. However, the interconnection is not easy because various data service system uses difference protocols to transmit digital contents and the receiving protocol of terrestrial DMB system is the standardized one. In this paper, we designed and implemented the middleware structured system, trying to minimize problems and difficulties in the interconnection of the data service system and terrestrial DMB transmitting system. We considered the readiness of the extension of the various transmitting method in the various data service systems and also implemented Terrestrial DMB Data Inserter system that transmits contents data on the broadcasting schedule.

• Journal of Korea Multimedia Society
• /
• v.17 no.6
• /
• pp.697-705
• /
• 2014

For enhancing network efficiency, content-centric networking (CCN) allows network nodes to temporally cache a transmitted response message(Data) and then to directly respond to a request message (Interest) for previously cached contents. Also, CCN is designed to utilize a hierarchical content-name for transmitting Interest/Data instead of a host identity like IP address. This content-name included in Interest/Data reveals both content information itself and the structure of network domain of a content source which is needed for transmitting Interest/Data. To make matters worse, This content-name is human-readable like URL. Hence, through analyzing the content-name in Interest/Data, it is possible to analyze the creator of the requested contents. Also, hosts around the requester can analyze contents which are asked by the requester. Hence, for securely implementing CCN, it is essentially needed to make the content-name illegible. In this paper, we propose content-name encoding schemes for CCN so as to make the content-name illegible and evaluate the performance of our proposal.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.7 no.2
• /
• pp.29-36
• /
• 2004

The purpose of this study is to analyze DMB(digital multimedia broadcasting) technologies of transmitting GIS-based traffic information for developing DMB systems compared with FM DARC(FM data radio channel). R&D and standardizations for transmitting GIS-based traffic information have been rapidly changed, as radical developments in ITS(intelligent transportation systems), telemaics, and communication methods such as ubiquitous and convergences of broadcasting and communications. Each communication method employs different GIS format, protocol, and standardizations, i.e., GML(geography markup language) and TPEG(transport protocol experts group). This paper presents technical methods and trends of transmitting traffic information using broadcasting along with FM DARC, in general, and DMB, in particular.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.43 no.3 s.309
• /
• pp.41-50
• /
• 2006

This paper presents a novel ultrasonic sensor system to overcome limited distance detection range that can be measured only more than 30cm by single ultrasonic transducer. This is accomplished by separation of receiving capacitive ultrasonic transducer from transmitting capacitive ultrasonic transducer. And hardwares and software of the system are described in detail. The system makes very close range as well as long range detect by wireless precisely. Frequency of trigger pulse is 10Hz, but it is very low frequency for transmitting data in wireless module. Therefore, for triggering between receiver and transmitter, an algorithm for mixing and distinguishing trigger pulse from carrier pulse by software is proposed. The system is designed by common microprocessor 8051. The performance of the proposed method has been assessed through two types. The first, transmitting and receiving transducer are put on both sides. And then, distance of two point is measured as far as 0mm. Secondly, transmitting transducer send out ultrasonic pulse and measure the time of flight(TOF) until a first echo from an object detected by the detached receiving transducer. The distance between the detached transducers and a reflecting object is measured as far as 7cm. Images of measured ultrasonic waves and TOF for two methods presented to prove effectiveness of results.

• Journal of IKEEE
• /
• v.22 no.3
• /
• pp.742-746
• /
• 2018

In this paper, we implemented a VLC(Visible Light Communication) system capable of transmitting/receiving data on a 30MHz clock based on On/Off keying modulation/demodulation. The data rate of the implemented system can be verified by functional verification of VLC channel composed of LED/photodiode driver and VLC transmitting/receiving signal of Tx/Rx platform. But, In the experimental results with the VLC transmitting/receiving for combined module, the maximum transmission rate was measured at 15 MHz. Therefore, we describe the problems that can occur when implement the VLC system using the LED module with output power of 15W or more and propose ways to improve it.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.141-144
• /
• 1998

An L-band omnidirectional circular polarized wave antenna is designed and evaluated for transmitting/receiving of vehicle data. Conventional linear polarized wave antenna can not reveive clearly all of the vehicle data which come from the wide driving test range on account of distortion. To overcome this problem, an omnidirectional circular polarized wave antenna is required for the design, first of all, the characteristics, design principle and theoretical background of circular polarized wave with a little signal loss have been reviewed. The designed antenna characteristics an analysed and compared to the desired ones. Our results demonstrate that the strength of vehicle data is flat enough over the full test range using this new antenna.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.164-167
• /
• 2009

The amount of acoustic data gathered from the acoustic data gathering system is increased dramatically as the acoustic data gathering system become various and highly effective. It is needed to transmit this acoustic data to analysis environment for precise analysis. In this gathering/analysis system, it is also needed the stable transmitting as well as highly perfect security. In this paper, I would like to propose a transmitting and management system sending a massive gathering acoustic data in the unsecurity and low speed networking environment. The implemented system is to transmit the acoustic data safely in low speed networking environment and secure the acoustic data from various threats.

• Journal of KIISE:Computing Practices and Letters
• /
• v.8 no.3
• /
• pp.328-335
• /
• 2002

When we want to transfer video streaming data through computer networks, we will have to be allocated a larger bandwidth compared to a general application. In general, it causes a serious network overload inevitably due to the limited bandwidth. In this paper, in order to resolve the problem, we haute taken a method for transmitting video streaming data using RTP and RTCP. With RR(Receiver Report) packet in RTCP we will test it to check whether the traffic in a network has occurred or not. If it happened, we haute tried to reduce the overall network traffic by dynamically changing the quantization factor of the Motion JPEG that is one of the encoding styles in JMF. When the ratio of the average of transmission for each session to the average of overall transmission is greater than 7%, we should adjust the amount of data to be transmitted for each session to reach the session mean values. The experimental results show that the proposed method taken here reduces the overload effectively and therefore improves the efficiency for transmitting video streaming data.

• Journal of Korean Society of Water and Wastewater
• /
• v.31 no.3
• /
• pp.249-256
• /
• 2017

Recently, application areas based on M2M (Machine-to-Machine communications) and IoT (Internet of Things) technologies are expanding rapidly. Accordingly, water flow and water quality management improvements are being pursued by applying this technology to water and sewage facilities. Especially, water management will collect and store accurate data based on various ICT technologies, and then will expand its service range to remote meter-reading service using smart metering system. For this, the error in flow rate data transmitting should be minimized to obtain credibility on related additional service system such as real time water flow rate analysis and billing. In this study, we have identified the structural problems in transmitting process and protocol to minimize errors in flow rate data transmission and its handling process which is essential to water supply pipeline management. The result confirmed that data acquisition via communication system is better than via analogue current values and pulse, and for communication method case, applying the industrial standard protocol is better for minimizing errors during data acquisition versus applying user assigned method.