• The Transactions of the Korea Information Processing Society
• /
• v.3 no.6
• /
• pp.1534-1541
• /
• 1996

Routing security is the confidentiality of route taken by the data transmitted over communication networks. If the route is detected by an adversary, the probability is high that the data lost or the data can be intercepted by the adversary. Therefore, the route must be protected. To accomplish this, we select an intermediate node secretly and transmit the data using this intermediate node, instead of sending the data to a destination node using the shortest direct path. Furthermore, if we use a number of secret routes from a node to a destination node, data security is much stronger since we can transmit partial data rather than entire data along a secret route. Finally, the idea above is implemented on MRNS Network.

• The KIPS Transactions:PartC
• /
• v.10C no.2
• /
• pp.163-170
• /
• 2003

In this paper we propose a robust clustered croup Multicast in Ad-hoc network. The proposed scheme applies to weighted clustered Algorithm. Ad-hoc network is a collection of wireless mobile hosts forming a temporary network without the aid of any centralized administration or reliable support services such as wired network and base station. In ad hoc network routing protocol because of limited bandwidth and high mobility robust, simple and energy consume minimal. WCGM method uses a base structure founded on combination weighted value and applies combination weight value to cluster header keeping data transmission by scoped flooding, which is the advantage of the exiting FGMP method. Because this method has safe and reliable data transmission, it shows the effect to decrease both overhead to preserve transmission structure and overhead for data transmission.

• The KIPS Transactions:PartB
• /
• v.12B no.7 s.103
• /
• pp.745-754
• /
• 2005

This paper proposes an information hiding algorithm using channel coding technique which can be used to detect transmission errors and to protect copyright for MPEG-2 video The watermark signal is generated by applying copyright information of video data to a convolutional encoder, and the signal is embedded into macro blocks in every frame while encoding to MPEG-2 video stream In the decoder, the embedded signal is detected from macro blocks in every frame, and the detected signal is used to localize transmission errors in the video stream. The detected signal can also be used to claim ownership of the video data by decoding it to the copyright Information. In this stage, errors in the detected watermark signal can be corrected by channel decoder. The 3 video sequences which consist of 300 frames each are applied to the proposed MPEG-2 codec. Experimental results show that the proposed method can detect transmission errors in the video stream while decoding and it can also reconstruct copyright information more correctly than the conventional method.

• The Journal of the Acoustical Society of Korea
• /
• v.41 no.1
• /
• pp.16-29
• /
• 2022

This paper presents a Doppler shift estimation method and signal processing schemes for Direct Sequence Spread Spectrum (DSSS) transmission to overcome the Doppler shift due to the moving of the underwater communication unit. The proposed method estimates a Doppler shift via 2 step procedures using the preamble with the two 64-length Frank sequences which has a good self-correlation characteristic and is insensitive to the Doppler shift. Furthermore, a packet of DSSS underwater mobile communication and a RAKE receiver are designed using the proposed Doppler shift estimation method. Due to the modulation scheme of the designed DSSS underwater mobile communication using Differential-Quadrature Phase Shift Keying (DQPSK) for the data symbol transmission, the RAKE receiver dose not need a phase tracking and easily makes coherent signals among the combining RAKE branches. The designed RAKE receiving scheme including the proposed Doppler shift estimation method successfully decides information data using the DSSS signal transmitted from the pseudo-moving transmitter with velocity upto about 17.5 m/s.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.98-100
• /
• 2005

This paper describes link analysis on the processed data, HRIT (High Rate Information Transmission) and LRIT (Low Rate Information Transmission), for the preliminary design of interface between COMS (Communication, Ocean and Meteorological Satellite) and ground station. At the MODAC (MeteorologicaVOcean Data Application Center), the processed data are transmitted to user station via COMS with normalization and calibration by pre-processing of MI (Meteorological Imager) data. Due to consider satellite as radio relay, overall analysis containing uplink and downlink is needed. Specific link parameters can be obtained with using the outcomes of SRR (System Requirement Review) which was held on 13-14 June 2005, in Toulouse. From the relation between overall link margin and output power of HPA (High Power Amplifier) of MODAC, it is shown that even though the minimum power related with COMS receiving power range is transmitted at MODAC, the obtained link margin of HRIT could be above 3 dB at user station which antenna elevation angle is 10 degree.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.7
• /
• pp.847-854
• /
• 1999

The setting of protective relays, which is critical to the power system security and reliability, requires a huge volume of data processing and repetitive calculation. Since it has been performed by relay engineers manually, it is vulnerable to human errors, its computerization has been pursued, in which the efficient management of the data is the key to the success. The database for power system protection must accommodate not only the power system network data but also a variety of protective devices. Also its information should be able to be viewed and updated with easy by operators and by computer programs. This paper describes several existing database designs for power system protection, their advantages and disadvantages. Also this paper has identified the required function and designed the database for the KEPCO power system data structure for the benefit of the relay setting process, etc..

• Journal of the Institute of Convergence Signal Processing
• /
• v.13 no.4
• /
• pp.211-219
• /
• 2012

In this paper, we described the software development for verifying the integrity of output data of TCP/IP for VLBI Correlation Subsystem (VCS) correlation block and proposed the performance improvement method in order to prevent the data loss of correlation output. The VCS correlation results are saved at the Data Archive system through TCP/IP packet transmission. In this paper, the integrity verification software is developed so as to confirm the integrity of correlation result saved at the data archive system using TCP/IP packet information of VCS. The 3-step integrity verification process is proposed by using the developed software, its effectiveness was confirmed in consequence of correlation experiments. In addition, TCP/IP packet transmission must be completed within minimum integration period. However, there is not only TCP/IP packet loss occurred but also the problem of correlation result integrity affected in account of a large quantity of packets and data during short integration time. In this paper, the reason of TCP/IP packet loss is analyzed and the modified methods for FPGA(Field Programmable Gate Array) of VCS are proposed, the integrity problem of correlation results will be solved.

• The Transactions of the Korea Information Processing Society
• /
• v.3 no.7
• /
• pp.1834-1844
• /
• 1996

In asynchronous communication data of specific area are used as all kinds of control characters. Therefore, data of this area must be converted to other character and transmitted followed by control prefix to prevent the misconception as control characters. This paper presents several methods for character conversion that prevent the lengthening of data and enhance the overall efficiency of communication by transmitting with a certain conversion and without control prefixes on control-like characters occurring when data are transmitted with ciphering onto asynchronous communication path. For such conversion, the scope of transmitted data was sup-posed and efforts were made not to exceed that scope. Experiments showed that method is better in communication speed than the existing ones and the ciphering has no problem by confirming the randomness of ciphered data.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1082-1082
• /
• 2001

Extrusion is one of the most important processes in polymer industry. The characterization of the polymer melt during processing will improve this process noticeably, One possibility of characterizing the actual processed polymer melt is the inline near infrared (NIR) spectroscopy, With this method several polymer properties can be observed during processing, e.g. composition, moisture ormechanical properties of the melt. For this purpose probes for transmission and reflection measurements have been developed, withstanding the high temperatures and pressures appearing during extrusion process (tested up to 300$^{\circ}C$ and 10 ㎫). For the transmission system an optical bypass was developed to eliminate disturbing spectral influences and hence increase the long term stability, which is the prerequisite for an industrial application. Measurements in transmission and reflection produced comparable results (or blending processes, where the prediction error was less than 1%. An optimum RMSEP of only 0.24% was found for preprocessed polymer blends measured in transmission on a laboratory extruder. A transflection measurement allowed for the first time the recording of relevant NIR-spectra in the screw area of an extruder. The application to a (PE+PP) blending process delivered promising results. This new measurement mode allows the observation of the ongoing processes within the screw area, which is of maximum Interest for reactive extrusion processes. Due to economic reasons the calibration transfer between different extrusion systems is also of high importance. Investigations on simulated and real-world spectra showed that a calibration transfer is possible. A new method alternatively to the well-known direct standardization procedures was developed, which is based on an automatic data pretreatment. This procedure delivers comparable results for the calibration transfer. Overall this paper presents concepts, components and algorithms for the inline near infrared (NIR) spectroscopy for polymer extrusion, which allows the use of it in a real industrial extrusion process.

• Journal of the Institute of Convergence Signal Processing
• /
• v.4 no.1
• /
• pp.9-14
• /
• 2003

APON, the subscriber network using bus or tree topology, requires MAC protocol, because it shares the uplink channel for many subscribers to transmit data to OLT. Although various MAC schemes, which consider each QoS characteristics of traffic are proposed considering transmission characteristics of ATM traffic class, existing schemes reduce the network efficiency by increasing transmission overhead in frame. In this paper, we propose new MAC scheme, which shows similar performance as those of existing schemes but does not increase transmission overhead. To prevent increasing transmission overhead, the proposed scheme encodes the information about each cell information of traffic of the local queue in RAU transmitted periodically from ONU to OLT Thus, the proposed MAC scheme shows similar performance as those of existing ones and increases efficiency of entire network.