• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.6
• /
• pp.667-673
• /
• 2004

The XML is emerging as standard language for data exchange on the Web. Therefore the demand of XML Schema(W3C XML Schema Spec.) that verifies XML document becomes increasing. However, XML Schema has a weak point for design because of its complication despite of various data and abundant expressiveness. This paper shows a simple way of design for XML Schema using a fundamental means for database design, the Entity-Relationship model. The conversion from the Entity-Relationship model to XML Schema can not be directly on account of discordance between the two models. So we present some algorithms to generate XML Schema from the Entity-Relationship model. The algorithms produce XML Schema codes using a hierarchical view representation. An important objective of this automatic generation is to preserve XML Schema's characteristics such as reusability, global and local ability, ability of expansion and various type changes.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.12
• /
• pp.15-21
• /
• 2008

Several shared buses are divided hierarchically and connected with a bridge in the bus topology that consists of many components such as SoCs. Because the bridge topology is capable of the simultaneous communication of components in the several buses, the bus performance has improved definitely. However, when the inter-bus data transaction happens, the latency increases seriously in the bridge block. In this paper, a variety of bridge architectures are analyzed in the point of view of merit and demerit. Superior frying bridge topology is proposed in the aspects of performance, IP reusability, timing margin, gate count and circuit complexity. In contrast with the conventional bridge that has only a role to switch the inter-bus data, the frying bridge can communicate directly between the bus and the slave, which decreases the traffic overhead of a shared bus and improves the performance of a bridge communication.

• Journal of Korea Multimedia Society
• /
• v.9 no.6
• /
• pp.742-749
• /
• 2006

In the network-based game where it uses the Internet infrastructure, the implementation is possible with the various methods. Such Applications are developed in the multi-tired architecture. There are many cases for the server to be separated from the hardware or the software. In this case, a lot of applications make the distributed process possible and are made as the multi-tiered architecture to develop the reusability of the existing software module. Especially, it is mostly general to separate for the case of a database server to a new tier. One of the important points of multi-tiered server side applications is security and because of this, it is difficult to share the related data about the design skill. Using design patterns, it gives help in reusing the existing written-code for the design of the game that needs a lot of money and time. Design Patterns are related to the software reuse. For the development of more efficient games, if well-defined design patterns are provided to the developers, then it would make more easy advanced game API and make possible the framework for the game development based on the API Through the analysis of the general network-based game currently servicing in the Internet, in this paper, we discuss how to implement a business logic tier using database system among the server side architectures. The main objective of this article is to show an efficient APIs(Application Programming Interfaces) design method which can be used to manage the data that must be saved to the database system among the packets that client/server have to be exchange.

• Journal of Internet Computing and Services
• /
• v.7 no.6
• /
• pp.123-130
• /
• 2006

The transaction was happened within a single business entity or a single marketplace at the stage of e-business. It becomes to grow to complex form. Expecially, the need for business collaboration between business entities or marketplaces has being on the rise as the core topic. The format translation between documents is very important factor according to various the exchanged document formats. In this paper, we define ebXML as the basic format of exchanged document according to object-oriented business transaction. Also we design the multi-format translation system to support the translation of various document formats. The proposed system in this paper, is designed with model-driven method and it is possible to construct with various structure as for system environment. The proposed translation system is designed to use the proposed system as adding the corresponding parsing module even though any format of document. Also, we increase the reusability of data as using the common data set. In this paper, we prove the superiority of the proposed system to compare the performance with the legacy system for various format translation.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.2 s.40
• /
• pp.7-13
• /
• 2006

The advent of Semantic Web has generated several methods that can access the data on the web. Thus, it is necessary to handle the data by accessing the current web ontology as well as the existing knowledge base system. Web ontology languages are RDF(Resource Description Framework), DAML-OIL, OWL(Web Ontology Language), and so on. This paper presents the creation and the method of the ontology object model that can access, represent, and process the web ontology and the existing knowledge base. Unlike the existing access approach of web ontology using the model on memory constructed by each parser, we divide the model of web ontology into three layers such as frame-based ontology layer, generic ontology layer, and functional ontology layer. Generic ontology layer represents the common vocabulary among several domains and functional ontology layer contains the dependent vocabulary to each ontology respectively. Our model gets rid of the redundancy of the representation and enhances the reusability. Moreover, it can provide the easy representation of knowledge and the fast access of the model in the application.

• Survey Research
• /
• v.11 no.1
• /
• pp.107-121
• /
• 2010

The purpose of this paper is to design and implement a Computer Assisted Personal Interviewing (CAPI) system for Panel Survey of Employment for the Disabled (PSED) using Blaise software developed by Statistics Netherlands which is a powerful and flexible system used for computer-assisted survey processing. CAPI system for PSED is consisted of three parts, which are survey management program, electronic questionnaire program, and postprocessing program. These programs are constructed with modular approach and are integrated into CAPI system. The developed software is highlighted in its reusability which results in the improved efficiency and reduced cost of software maintenance. CAPI system for PSED proved its effectiveness in carrying out the survey by guaranteeing correctness of survey data, improved timeliness of survey, easy reforming the questionnaires, easy control on the interviewers, and rapid data processing in spite of the complexity of PSED.

• Advances in environmental research
• /
• v.3 no.3
• /
• pp.231-251
• /
• 2014

The present study examines the phosphate adsorption potential and behavior of mixture of Ground Burnt Patties (GBP), a solid waste generated from cooking fuel used in earthen stoves and Red Soil (RS), a natural substance in fixed bed column mode operation. The characterization of adsorbent was done by Proton Induced X-ray Emission (PIXE), and Proton Induced ${\gamma}$-ray Emission (PIGE) methods. The FTIR spectroscopy of spent adsorbent reveals the presence of absorbance peak at $1127cm^{-1}$ which appears due to P = O stretching, thus confirming phosphate adsorption. The effects of bed height (10, 15 and 20 cm), flow rate (2.5, 5 and 7.5 mL/min) and initial phosphate concentration (5 and 15 mg/L) on breakthrough curves were explored. Both the breakthrough and exhaustion time increased with increase in bed depth, decrease in flow rate and influent concentration. Thomas model, Yoon-Nelson model and Modified Dose Response model were used to fit the column adsorption data using nonlinear regression analysis while Bed Depth Service Time model followed linear regression analysis under different experimental condition to evaluate model parameters that are useful in scale up of the process. The values of correlation coefficient ($R^2$) and the Sum of Square Error (SSE) revealed the Modified Dose Response model as the best fitted model to the experimental data. The adsorbent mixture responded effectively to the desorption and reusability experiment. The results of this finding advocated that mixture of GBP and RS can be used as a low cost, highly efficient adsorbent for phosphate removal from aqueous solution.

• Journal of Digital Convergence
• /
• v.19 no.8
• /
• pp.219-224
• /
• 2021

The convergence of various industries has removed the boundaries of software application fields and reduced the restrictions on convergence fields. Software requirements are diversified and they want to reconfigure software requirements in a fast cycle. Since various changes in requirements have to be accepted technically, research on methodologies and standards to increase the efficiency of software productivity and methods for standardizing and producing software are needed. In this study, we studied how the reusability and complexity of the software asset reconfiguration system appeared according to the developer's characteristics and environment to utilize the assets optimized in previous studies. At this time, we measured how the change in complexity according to the usability and asset composition method that appears according to the developer's characteristics appears, but there is a limit to the collected data, so it is necessary to secure the quality of the measured value through continuous data collection. In addition, an intelligent system application plan is needed to supplement the problem of context classification in the use stage of complex assets.

• Journal of Korea Spatial Information System Society
• /
• v.3 no.1 s.5
• /
• pp.49-62
• /
• 2001

Recently, component-based software has become main trends in designing and developing computer software products. This component-based software has advantage of the interoperability on distributed computing environment and the reusability of pre-developed components. Also, GIS is designed and implemented with this component-based methodology, called Open GIS Component. OGC(OpenGIS Consortium) have announced various implementation and design specification and topic in GIS. In GIS, Spatial analysis functions like network analysis, TIN analysis are very important function and basically, estimate system functionality and performance using this analysis methods. The simple feature geometry specification is announced by OGC to increase the full interoperability of various spatial data. This specification includes just geometry spatial data model. However, in GIS which manages spatial data, not only geometric data but also topological data and various analysis functions have been used. The performance of GIS depends on how this geometric and topological data is managed well and how various spatial analyses are executed efficiently. So it requires integrated spatial data model between geometry and topology and extended data model of topology for spatial analysis, in case network analysis and TIN analysis in open GIS component. In this paper, we design analysis component like network analysis component and TIN analysis component. To manage topological information for spatial analysis in open GIS component, we design extended data model of simple feature geometry for spatial analysis. In addition to, we design the overall system architecture of open GIS component contained this topology model for spatial analysis.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.4
• /
• pp.501-510
• /
• 2023

The importance of using construction data is increasing in accordance with the recent trend in the smart construction. However, construction project and maintenance information is distributed on the web, and the existing BIM(Building Information Modeling) information exchange and linking method using IFC(Industry Foundation Classes) cannot support connection with BIM data and web resources. This study aims to establish the BIM-based port facility data integration system using linked data(LD) technology in order to integrate BIM and heterogeneous data in the port maintenance domain. To this end, the port BIM-based ifcOWL and port facility maintenance ontology were designed, and LD was built for the BIM and maintenance information of Busan New Port 2-1 Pier3, a BIM pilot project. In addition, service prototypes such as search, statistics and SPARQL(SPARQL Protocol and RDF Query Language) endpoint functions were implemented using the issued LD. The LD-based information utilization system is expected to improve the reusability of information by converting the existing closed information system into an open system and BIM and maintenance data as a web resource in a standard format.