• The Journal of Information Systems
• /
• v.31 no.4
• /
• pp.75-100
• /
• 2022

Purpose Recently, hyper-realistic virtual influencers have received much attention in the field of corporate marketing. However, there is a lack of research that suggests specific processes affecting behavioral intentions through trust and attachment between virtual influencers and consumers. In addition, previous studies have failed to consider the characteristics of hyper-realistic virtual influencers. Therefore, this study investigates the effects of trust and attachment to hyper-realistic virtual influencers on consumers' behavioral intentions based on the trust-building model. Design/methodology/approach Based on the previous research, seven antecedent factors for trust-building were derived: Reality, Attractiveness, Awareness, Interactivity, Professionalism, Social Presence, and Predictability. Next, the survey was conducted on Chinese people who had experienced interacting with hyper-realistic virtual influencers on social network services within the last 3 months at the time of data collection. A total of 326 respondents were used for the final analysis and hypotheses were tested using a structural equation model technique. Findings The results of this study are as follows. First, this study confirmed that reality, attractiveness, awareness, social presence, and predictability as antecedent factors for trust-building of hyper-realistic virtual influencers have a positive effect on trust. Second, this study confirmed that trust in hyper-realistic virtual influencers has a significant positive effect on attachment. Lastly, this study confirmed that trust and attachment to the hyper-realistic virtual influencer significantly and positively affect relationship retention and purchase intentions.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.4 no.1
• /
• pp.45-51
• /
• 2004

We have proposed a new shallow trench isolation (STI) process using flowable oxide (F-oxide) chemical vapor deposition (CVD) for DRAM application and it was successfully developed. The combination of F-oxide CVD and HDP CVD is thought to be the superior STI gap-filling process for next generation DRAM fabrication because F-oxide not only improves STI gap-filling capability, but also the reduced local stress by F-oxide in narrow trenches leads to decrease in junction leakage and gate induced drain leakage (GIDL) current. Finally, this process increased data retention time of DRAM compared to HDP STI. However, a serious failure occurred by symphonizing its structural dependency of deposited thickness with poor resistance against HF chemicals. It could be suppressed by reducing the flow time during F-oxide deposition. It was investigated collectively in terms of device yield. In conclusion, the combination of F-oxide and HDP oxide is the very promising technology for STI gap filling process of sub-100nm DRAM technology.

• Korean Journal of Environmental Agriculture
• /
• v.11 no.1
• /
• pp.20-25
• /
• 1992

To understand the fundamental features of reservoir environment and its future aspects, a simple predictive model for water quality was attempted with the aid of data easily obtained, Based on the data from 12 reservoirs in Korea, application of the simple predictive model was successfully made by means of statistical methods and simple physical submodels. Significant information on th effects of retention time on primary production in a reservoir, longitudinal change in water quality affected by certain non-dimensional parameters were also obtained. The chlorophyll-a concentration can be predicted by the equation as ; chlorophyll-a=($395{\time}limiting$ nutrient concentration) - 1.090.

• Journal of Korean Academy of Nursing
• /
• v.28 no.3
• /
• pp.650-661
• /
• 1998

The purpose of this study was to provide fundamental data for determining contents of Fundamental Nursing Practice and developing desirable bedside nursing techniques for clinical nursing areas. Subjects for this study were 86 nurses who were employees of two university hospitals located in Seoul and a district area. Data were collected by questionnaires. Items of Fundamental Nursing Practice were classified into 72 items according to the result from content analysis of 9 textbooks of Fundamental Nursing. The results are as follows : 1) Items which above 80% of respondents practiced during the school inside practice or clinical nursing practice course were axillary temperature measurement, radial pulse measurement, respiratory rate measurement, application of oral hygiene, hand-washing technique, application of hot and cold bags, intramuscular injection technique, open bed-making, soap enema method, application of nelaton catheterization and oral and nasal suction methods. 2) Above 90% of respondents replied that all items except temperature measurement and bed-making were requisite contents for Fundamental Nursing Practice. Above 10% of respondents replied oral and rectal temperature measurement and bed-making were unnecessary content. 3) Above 90% of respondents replied that operating methods of all items except isolation technique, admission and discharge procedures, and retention enema in the Fundamental Nursing Practice course and clinical situation were consistent. The main reasons that respondents did not apply methods which they learned in the Fundamental Nursing Practice course to the clinical situation were 'insufficient time', 'colleagues were using different methods', 'insufficient supply of instuments' or 'inappropriate appliances'.

• Journal of the Korean Wood Science and Technology
• /
• v.19 no.4
• /
• pp.7-17
• /
• 1991

The feasibility of treating three softwood(Japanese larch pitch pine, and Korean pine) thinned logs by double-diffusion treatment processes was investigated. Some posts were incised before immersion, and others were imersed in hot copper sulfate solution. Comparison among species indicated that. in general, pitch pine was most treatable and Japanese larch least treatable. For all three species, almost all treatment schedules gave consistently good penetration and high net retention, but very steep gradient of preservative distribution. As expected, the treatability was increased by the extension of immersion time, increased concentration of treating solution, incising. and heating of the first solution. Of the variables tested, it appears that heating of the first solution is the most important. From the data in this paper, it may be concluded that, if the first solution is not heated, the best schedule is #3. If the first solution is healed. it appears the best schedules are #10 or #11. Since heating of the first solution improves the treatability. schedules # 10 or :#11 are recommended if the cost of heating might be justified. The data presented in this paper indicate that double-diffusion treatment processes seem to offer a promise as a comparatively effective and easy-operating method of treating thinned logs for the small-scale production of treated stock.

• Water for future
• /
• v.24 no.2
• /
• pp.109-119
• /
• 1991

The river-bed variation and the sediment transport in an alluvial stream are very complicated physical phenomena, especially in a stream where the dam construction prevents the supply of earth and sand from upper tributaries Therefore, the mathematical modeling is needed to establish. The purpose of this study is to apply river-bed variation to the Han River downstream by the conception of gradually varied unsteady flow instead of that of steady flow in order to decrease errors. For the variation and forecast of river-bed, the numerical analysis has been made in this study by way of discharge variation and river-bed variation. In conclusion, the numerical analysis shows that river-bed variation, sediment transport , and their forecast have similarity to natural phenomena and that river-bed variation is greatly affected in sediment transport by discharge variation and retention time(duration). Therefore, the errors of numerical analysis can be reduced by the application of flood data instead of continuous discharge data.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.46 no.6
• /
• pp.3-10
• /
• 2004

The fundamental study of hydrologic redesign of Donghwa area located in a sccond tributary of Seomjin river was performed. The amounts of hydrologic design were estimated using the available cumulated hydrology data provided by Korea Agricultural and Rural Infrastructure Corporation (KARICO). The management status of The water resources in Donghwa area was also widely surveyed. The probability rainfalls, probable maximum precipitation (PMP) and probability floods were estimated and subsequently their changes analyzed. The amount of 200 year frequency rainfall with l day duration was 351.1 mm, 2.5 % increased from the original design value, and The PMP was 780.2 mm. The concentration time was reestimated as 2.5 hours from existing 2.4 hours. Soil Conservation Service(SCS) method was used to estimate effective rainfall- The runoff curve number was changed from 90 to 78, therefore the maximum potential retention was 71.6 mm, 154 % increased from the original value. The Hood estimates using SCS unit hydrograph showed 8 % increase from original value 623 $m^3$/s to 674 $m^3$/s and The probable maximum Hood was 1,637 $m^3$/s. Although the Row rate at the dam site was increased, the Hood risk at the downstream river was decreased by the Hood control of the Donghwa dam.

• Journal of Korean Society of Water and Wastewater
• /
• v.25 no.5
• /
• pp.635-642
• /
• 2011

Hydraulic efficiency was a vital component in evaluating the disinfection capability of clearwell. Current practice evaluates these system based on the tracer test only. In this paper, CFD(Computational Fluid Dynamics) was applied on the clearwell for alternating or supplementing the tracer test. The baffle factor derived from the CFD modeling closely matched the values obtained from full scale tracer testing. And, for suggesting proper numerical model in clearwell; the turbulence model, discretization scheme, convergence criteria were investigated through separate simulation runs. The model validation was conducted by comparing the simulated data with experimental data. In the turbulence model, the realizable ${\kappa}-{\varepsilon}$ model and the standard ${\kappa}-{\varepsilon}$ model were found to be more appropriate than RNG ${\kappa}-{\varepsilon}$ model. The residuals of convergence criteria should be used as not $10^{-3}$ but $10^{-4}$ or $10^{-5}$. In discretization scheme, the difference of simulated values in 1st, 2nd, 3rd upwind scheme was found to be insignificant. Moreover, the result of this study suggest that CFD modeling can be a reliable alternative to tracer testing for evaluating the hydraulic efficiency.

• Nuclear Engineering and Technology
• /
• v.55 no.8
• /
• pp.2757-2772
• /
• 2023

The fluid retention effect of the Volume Control Tank (VCT) leads to a long time delay in Reactor Coolant System (RCS) concentration during the boration process. A coupled model combining a lumped-parameter sub-model and a computational fluid dynamics sub-model is currently used to investigate the concentration dynamic characteristic of RCS during the boration process. This model is validated by comparison with experimental data, and the predicted results show excellent agreement with experimental data. We provide detailed fields in VCT and concentration variations of RCS to study the interaction between mixing in VCT and the transient responses of RCS. Moreover, the impacts of the inlet flow rate, inlet nozzle diameter, original concentration, and replenishing temperature of VCT on the RCS concentration characteristic are studied. The inlet flow rate and nozzle diameter of VCT remarkably affect the RCS concentration characteristic. Too-large or too-small inlet flow rates and nozzle diameters will lead to unacceptable long delays. In this work, the optimal inlet flow rate and nozzle diameter of VCT are 5 m³/h and 58.8 mm, respectively. Besides, the impacts of the original concentration and replenishing temperature of VCT are negligible under normal operating conditions.

• Analytical Science and Technology
• /
• v.13 no.2
• /
• pp.136-150
• /
• 2000

For the identification of unknown drugs in biological samples, we attempted rapid high performance thin layer chromatographic method which is sensitive and selective chromatographic analysis of high performance thin layer chromatography (HPTLC) with automated TLC sampler and ultra-violet (UV) scanner. We constructed HPTLC database (DB) on two hundred five drugs by using the data of Rf values and UV spectra (scan 200-360 nm) as well as gas chromatography/mass spectrometry (GC/MS) DB on ninety six drugs by using the data of relative retention time (RRT) on lidocain and mass spectra. After extracting drugs in biological sample by solid phase extraction (Clean Screen ZSDAU020), we applied them to HPTLC and GC/MS DB. Drugs, especially extracted from biological samples, showed good matching ratio to HPTLC DB and these drugs were confirmed by GC/MS. In conclusion, this DB system is thought to be very useful method for the screening of unknown drugs in biological samples.