• Journal of Electrical Engineering and Technology
• /
• v.13 no.4
• /
• pp.1759-1768
• /
• 2018

The energy density, power density and ohm resistance of battery change significantly as results of battery aging, which lead to decrease in the accuracy of the equivalent model. A parameter identification method of the equivale6nt circuit model with 3 R-C branches based on the test database of battery life cycle is proposed in this paper. This database is built on the basis of experiments such as updating of available capacity, charging and discharging tests at different rates and relaxation characteristics tests. It can realize regular update and calibration of key parameters like SOH, so as to ensure the reliability of parameters identified. Taking SOH, SOC and T as independent variables, lookup table method is adopted to set initial value for the parameter matrix. Meanwhile, in order to ensure the validity of the model, the least square method based on variable forgetting factor is adopted for optimizing to complete the identification of equivalent model parameters. By comparing the simulation data with measured data for charging and discharging experiments of Li-ion battery, the effectiveness of the full life cycle database and the model are verified.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.9
• /
• pp.663-668
• /
• 2022

Since the early 2000s, the United States has applied TLCSM to reduce life cycle costs while maintaining the weapons system's combat readiness. With the application of TLCSM, the ILS concept centered on the acquisition stage shifted to IPS, a concept that manages life cycle costs throughout the entire life cycle. In addition, LSAR for developing ILS has switched to LPD for developing IPS. In this study, LSAR in Korea and LPD in the United States were compared and analyzed, and policies necessary for the introduction of LPD in Korea were proposed.

• The KIPS Transactions:PartD
• /
• v.18D no.6
• /
• pp.493-500
• /
• 2011

The trends of technical terms express the changes of particular subjects in a specific research field over time. However, the amount of academic literature and patent data is too large to be analyzed by human resources. In this paper, we propose a method that can detect and analyze the trends of terms by modeling the life cycle of the terms. The proposed method is composed of the following steps. First, the technical terms are extracted from academic literature data, and the TDVs(Term Dominance Values) of terms are computed on a periodic basis. Based on the TDVs, the life cycles of terms are modeled, and technical terms with similar temporal patterns of the life cycles are classified into the same trends class. The experiments shown in this paper is performed by exploiting the NDSL academic literature data maintained by KISTI.

• ALGAE
• /
• v.26 no.2
• /
• pp.201-208
• /
• 2011

A monoterpene lactone, loliolide was successively isolated from brown seaweed, Sargassum ringgoldianum subsp. coreanum using column chromatography and high-performance liquid chromatography. The structure of the isolated compound was determined by comparison of EIMS and NMR spectral data with the previously published data. The antioxidant activities of loliolide were also evaluated by DPPH and $H_2O_2$ radical and intracellular reactive oxygen species scavenging assays, and it showed moderate activities in all antioxidant assays. Furthermore, loliolide was found to exert positive dose-dependent effects in the protective effects against $H_2O_2$-induced cell damage which were determined via MTT, Hoechst staining assays and cell cycle analysis. This is the first study on chemical constituent of this seaweed according to our best knowledge. These results clearly indicated that loliolide isolated from Sargassum ringgoldianum subsp. coreanum can protect the cells against $H_2O_2$-induced cell damage or apoptosis.

• Journal of Environmental Impact Assessment
• /
• v.9 no.3
• /
• pp.203-214
• /
• 2000

Health risk assessment is applied to streamlining LCA(Life Cycle Assessment) using Monte carlo simulation for probabilistic/stochastic exposure and risk distribution analysis caused by data variability and uncertainty. A case study was carried out to find benefits of this application. BTC(Benzene, Trichloroethylene, Carbon tetrachloride mixture alias) personal exposure cases were assumed as production worker(in workplace), manager(in office) and business man(outdoor). These cases were different from occupational retention time and exposure concentration for BTC consumption pattern. The result of cancer risk in these 3 scenario cases were estimated as $1.72E-4{\pm}1.2E+0$(production worker; case A), $9.62E-5{\pm}1.44E-5$(manger; case B), $6.90E-5{\pm}1.16E+0$(business man; case C), respectively. Portions of over acceptable risk 1.00E-4(assumed standard) were 99.85%, 38.89% and 0.61%, respectively. Estimated BTC risk was log-normal pattern, but some of distributions did not have any formal patterns. Except first impact factor(BTC emission quantity), sensitivity analysis showed that main effective factor was retention time in their occupational exposure sites. This case study is a good example to cover that LCA with probabilistic risk analysis tool can supply various significant information such as statistical distribution including personal/environmental exposure level, daily time activity pattern and individual susceptibility. Further research is needed for investigating real data of these input variables and personal exposure concentration and application of this study methodology.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2007.04a
• /
• pp.62-67
• /
• 2007

The research team for the virtual construction development was established with the support of Korea Ministry of Construction and Transportation, and KICTEP (Korea Institute of Construction and Transportation Technology Evaluation and Planning). Its aims are to develop system that is to improve productivity & quality, to create a higher value-added business, and to cultivate international competitiveness in the construction industry. The virtual construction system is a design, engineering, and construction management information system that allows the project participants to effectively share the information throughout the construction life cycle with the support of 3D and design information. To achieve this, the research team focuses on developing several systems. First, the team focuses on developing for the pre-planning, the structural engineering, MEP, and the 3D based estimation system. Second, they focus on developing a simulation system for the construction process planning and feasibility study with help of the virtual reality technologies. Third, they focus on developing the CPLM (Construction Project Life-cycle Management) system for managing construction project data, and the decision support system that makes the collaboration among the project participants based on 3D technologies and information. We also focus on developing the SDAI (Standard Data Access Interface), the localized guideline for 3D design, and a training program. In addition, we focus on developing the undeveloped area of the commercial system and building an environment that can support the communication and collaboration in the construction life-cycle rather than developing the existing and commercialized system.

• Journal of Environmental Science International
• /
• v.12 no.6
• /
• pp.643-650
• /
• 2003

We analyzed the amount of environmental loads, and the amount of energy consumption through life cycle assessment from a discharge stage to the ultimate disposal to municipal solid waste in Seoul. We carried out inventory analysis of the amount of environmental loads that made the object range collection, intermediate treatment, and the final treatment, and took into consideration each stage exceptions CO$_2$ and NOx , the amount of SOx discharge, and energy consumption. We applied the data of an object model, and acquisition processed the scale of an object model suitably and applied to it to difficult data using the data of the Yokohama City incineration plant in Japan. The amount of environmental loads per Iton of municipal waste were analyzed CO$_2$ 0.4C-ton, SOx 0.4kg and NOx 0.8kg. Moreover, the amount of energy consumption which is 2.4Gcal was computed.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2009.11a
• /
• pp.205-208
• /
• 2009

The purpose of this study is to apply the process model of the pre-design stage to CPLM(Construction Project Life-cycle Management). Life-cycle consists of 4 stage; Pre-design, Design, Construction, Maintenance. Each stage has organic relations between front and rear stage. Therefore it is important to manage and use the information data of each stage. But these data are not carried to the next stage smoothly, especially at the pre-design stage. It is even vague to define the process of the pre-design stage. To carry and share the information well, this study defines Pre-design stage process and CPLM at first, VA-Cityplanner which is the development system of the pre-design process model is applied to CPLM for the smooth current of the data between participants.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.11a
• /
• pp.183-184
• /
• 2017

Some of the information created during the design phase of an New NPP life cycle is useful only for the execution of the construction phase; however, much of the information greatly impacts the longer-term operational phase. To most make use of design and construction information produced by data based design system during the construction and operation phase, This research is identified controlled data and drawn design information of controlled equipment from documents generated during the life-cycle stages. This study aimed to analyze related documents to assure traceability of controlled equipment from design phase through O&M and then suggested DB(Data Base) based control method on technical information of major equipment throughout nuclear power plant lifecycle.

• The Korean Journal of Archival Studies
• /
• no.5
• /
• pp.3-37
• /
• 2002

Today the market of EDMS is esteemed more than 100 billions won. It signifies a comming of age of electronic records. The traditional archival theories which are based on the paper records are confronted with a new challenge. In some leading countries of archival studies reorientation of archives management has been tried by a number of distinguished specialists such as Bearman and Hedstrom since 10 years. As a consequence new paradigm of archival theories has been developed. Also in Korea this new paradigm has been introduced by some expert such as Lee, Sang-Min, Sul, Moon-won, Lee, Seung-Eok. However their arguments are too general to offer a concrete clue for new paradigm. Faced by new age of electronic records, it's important to start a discussion for the reasonable methods of electronic records management at once. The most drastically changed part of record management by the electronic technique is the life-cycle of records. The commonly practiced three-stage life-cycle is to be reduced to the two-stage life-cycle, and the concept of the spatial movement of records is to be changed. It can be also pointed that the public emerges as user from the early creating stage of records beyond time and space. Thus is can be said that the method of the management features dynamic and cohesive. The method of appraisal must be also changed and reproduced, so that it can reflect the various levels considering dynamics of the electronic records. Supposedly it will be a core factor that causes the change of methodology in records management with the change of life-cycle theory. It must be noted that various subjects would be involved in the work of classification and description over time and space and that feedback between them is of important. Description also tends to be made at the crating stage of records and structured dynamically. It results from the change of life-cycle and the introduction of the concept of continuum. Such trend allows us to start discussions on the assumption that description of both creator and archival professionals act together an important role. Of course, it is linked with the methodology in which most descriptions are made automatically at the early drafting stage of the structure. The meat date is formed on the assumption that there should be feedback between areas of automatic description, description of creators and archival professionals. The most important thing in description is to develop a suitable way how it is structured. An alternative must be offered for managing data set. As iweb that is being operated by Myongji university shows, records created in daily business are managed not as electronic records but as date base. This is because they exist outside the repository in the EDMS system. Since data set often has various sources, an alternative for classification needs to be developed. It is now likely that database is filed according to the created year to be transferred automatically to the repository. Over a long-term the total management of database, electronic records and electronic information will be a topic. A right direction of new paradigm will be found for both iweb and E-government, when practice and studies of theories are combined and interacted.