• Journal of Advanced Marine Engineering and Technology
• /
• 제23권4호
• /
• pp.488-503
• /
• 1999

The present paper considers the constraint effect on J-R curves under the two-parameter $J-A_2$ controlled crack growth within a certain amount of crack extension. Since the parameter $A_2$ in $J-A_2$ three-term solution is independent of applied loading under fully plasticity or large-scale defor-mation $A_2$ is a proper constraint parameter uring crack extension. Both J and $A_2$ are used to char-acterize the resistance curves of ductile crack growth using J as the loading level and $A_2$ are used to char-acterize the resistance curves of ductile crack growth using J as the loading level and A2 as a con-straint parameter. Approach of the constraint-corrected J-R curve is proposed and a procedure of transferring the J-R curves determined from standard ASTM procedure to non-standard speci-mens or real cracked structures is outlined. The test data(e.g. initiation toughness JIC and tearing modulus $T_R$) of Joyce and Link(Engineer-ing Fracture Mechanics 1997, 57(4) : 431-446) for single-edge notched bend[SENB] specimen with from shallow to deep cracks is employed to demonstrate the efficiency of the present approach. The variation of $J_{IC}$ and $T_R$ with the constraint parameter $A_2$ is obtained and a con-straint-corrected J-R curves is constructed for the test material of HY80 steel. Comparisons show that the predicted J-R curves can very well match with the experimental data for both deep and shallow cracked specimens over a reasonably large amount of crack extension. Finally the present constraint-corrected J-R curve is used to predict the crack growth resistance curves for different fracture specimens. over a reasonably large amount of crack extension. Finally the present constraint-corrected J-R curve is used to predict the crack growth resistance curves for different fracture specimens. The constraint effects of specimen types and specimen sizes on the J-R curves can be easily obtained from the constrain-corrected J-R curves.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.161-166
• /
• 2008

In general structures, cleavage fracture may develop under the low constraint condition of larger scale yielding with a shallow surface crack. However, standard procedures for fracture toughness testing require very severe restrictions of specimen geometry. So the standard fracture toughness data makes the integrity assessment irrationally conservative. In this paper, cleavage fracture toughness tests have been made on side-grooved PCVN (precracked charpy V-notch) type specimens (10 by 10 by 55 mm) with varying crack depth, The constraint effects on the crack depth ratios are quantitatively evaluated by scaling model and Weibull stress method using 3-D finite clement method, After correction of constraint loss due to shallow crack depths, the statistical size effect are also corrected according to the standard ASTM E 1921 procedure, The results snowed a good agreement in the geometry correction regardless of the crack size, while some over-corrections were observed in the corrected values of $T_0$.

• 한국경영과학회지
• /
• 제33권3호
• /
• pp.29-42
• /
• 2008

Semantic Web society initially focused only on data but has gradually moved toward knowledge. Recently rule beyond ontology has emerged as a key element of the Semantic Web. All of these activities are obviously aiming at making data and knowledge on the Web sharable and reusable between various entities around the world. If one of ultimate visions of the Semantic Web is to increase human's decision making quality assisted by machines, there is a missing but important part to be shared and reused. It is knowledge about constraints on data and concepts represented by ontology which should be emphasized more. In this paper, we propose Semantic Web Constraint Language (SWCL) based on OWL and show how effective SWCL can be in representing and solving an internet shopper's decision making problem by an implementation of a shopping agent in the Semantic Web environment.

• 대한전자공학회논문지SP
• /
• 제40권1호
• /
• pp.79-86
• /
• 2003

본 논문에서는 블록 변화된 영상의 블록 환상을 제거하기 위해 POCS(Projection Onto Convex Set) 이론을 바탕으로 하는 적응 양자화 체한 집합을 제안한다. POCS 이론을 바탕으로 하는 블록 현상 제기 기법은 크게 부드러움 제한 집합과 양자화 제한 집합으로의 반복적인 투영을 동해 이루어진다. 기존의 양자화 제한 집합은 원 영상의 데이터가 가질 수 있는 최대 구간을 지정해 주므로 반복이 계속될수록 over-blurring 현상이 심화된다. 제안한 양자화 제한 집합은 이산 여현 변환(DCT) 계수의 특성에 파라 적응적으로 제한 구간을 조절하므로 복호화된 영상의 선명도를 유지하면서 동시에 효과적으로 블록 현상을 제거할 수 있다. 기존의 후처리 알고리즘의 양자화 제한 집합을 제안한 적응적 양자화 제한 집합으로 대체하여 실험을 수행한 결과 적은 반복 횟수로도 수령에 도달하였고 후처리 된 영상 역시 선명도를 유지하면서 블록 현상이 효과적으로 제거되었음을 알 수 있었다.

• 한국통신학회논문지
• /
• 제21권7호
• /
• pp.1685-1695
• /
• 1996

The postprocessing of compressed images based on the projections onto convex sets and the constrained minimization imposes several constraints on the procesed data. The quantization constraint has been commonly used in various algorithms. Quantization is many-to-one mapping, by which all the dat in a quantization region are mapped to the corresponding representative level. The basic idea behind the projection onto the QCS(quantization constraint set) is to prevent the processed data from diverging from the original quantization region in order to redue the artifacts caused by filtering in postprocessing. However, there have been few efforts to analye the POQCS(projection onto the QCS). This paper analyzed mathematically the POQCS of filtered data from the viewpoint of minimizing the mean square error. Our analysis shows that a proper filtering technique followed by the POQCS can reduce the quantization distortion. In the conventional POQCS, the outside data of each quantization region are mapped into the corresponding boundary. Our analysis also shows that mappingthe outside data to the boundary of a subregion of the quantization region yields lower distortion than does the mapping to the boundary of the original region. In addition, several examples and discussions on the theory are introduced.

• Journal of Sport and Applied Science
• /
• 제7권2호
• /
• pp.39-51
• /
• 2023

Purpose: The purpose of this study was to investigate differences in the control process to satisfy spatial and temporal constraints imposed upon the anticipation timing response by analyzing the effect of spatio-temporal accuracy demands on eye movements, response accuracy, and the coupling of eye and hand movements. Research design, data, and methodology: 12 right-handed male subjects participated in the experiment and performed anticipation timing responses toward a stimulus moving at three velocities (0.53m/s, 0.66m/s, 0.88m/s) in two task constraint conditions (temporal constraint, spatial constraint). During the response, response accuracy and eye movement patterns were measured from which timing and radial errors, the latency of saccade, fixation duration of the point of gaze (POG), distance between the POG and stimulus, and spatio-temporal coupling of the POG and hand were calculated. Results: The timing and radial errors increased with increasing stimulus velocity, and the spatio-temporal constraints led to larger timing errors than the temporal constraints. The latency of saccade and the temporal coupling of eye and hand decreased with increasing stimulus velocity and were shorter and longer respectively in the spatio-temporal constraint condition than in the temporal constraint condition. The fixation duration of the POG also decreased with increasing stimulus velocity, but no difference was shown between task constraint conditions. The distance between the POG and stimulus increased with increasing stimulus velocity and was longer in the temporal constraint condition compared to the spatio-temporal constraint condition. The spatial coupling of eye and hand was larger with the velocity 0.88m/s than those in other velocity conditions. Conclusions: These results suggest that differences in eye movement patterns and spatio-temporal couplings of stimulus, eye and hand by task constraints are closely related with the accuracy of anticipation timing responses, and the spatial constraints imposed may decrease the temporal accuracy of response by increasing the complexity of perception-action coupling.

• 제어로봇시스템학회논문지
• /
• 제5권1호
• /
• pp.62-68
• /
• 1999

The attitude of a vehicle can be precisely determined using GPS carrier phase measurements from more than two antennas attached to a vehicle and an efficient integer ambiguity resolution technique. Many methods utilizing the known baseline length as a constraint of independent elements of integer ambiguities are proposed to resolve integer ambiguity at real time. Three-dimensional search space is reduced to two-dimensional search space with this constraint. Thus the true integer ambiguity can be easily determined with less computational burden and fewer number of measurements. But there are still strong requirements for the real time integer ambiguity resolution, which uses single epoch measurement of long baseline. In this paper, a new constraint from the geometry of multiple baselines is derived. With this new constraint, two-dimensional search space is further reduced to one-dimensional search space. It makes possible to determine integer ambiguity with single epoch measurement. The proposed method is applied to real data to show its effectiveness.

• 한국압력기기공학회 논문집
• /
• 제16권2호
• /
• pp.47-57
• /
• 2020

A new elastic-plastic-creep constraint parameter is proposed to quantify the effect of constraint on creep crack initiation times. It represents the difference between the transient elastic-plastic-creep crack-tip opening stress and the Riedel-Rice opening stress field in plane strain, which can be determined analytically. Application of the proposed parameter to a large set of creep crack growth test data using C(T) and SEN(B) specimens of Type 316H stainless steel at 550℃ shows that creep crack initiation times can be more accurately characterized by the C⁎-integral together with the proposed parameter.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.1036-1039
• /
• 1996

The performance of real-time systems depends upon how well the tasks are scheduled within a cycle time and how fastly the response is made according to the occurrence of an external event. This paper presents the design of an effective real-time data acquisition system in order to gather the data from an automobile engine. This paper investigates an estimation and a restriction method of execution for aperiodic data. Also, the guarantee problem of real-time constraint is presented for periodic data. Through the experiments, the hard real-time guarantee problem of periodic data is studied and the damage problem of periodic data according to the increase of aperiodic tasks is analyzed.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 2007년도 추계학술대회 및 정기총회
• /
• pp.383-387
• /
• 2007

Traditional clustering is regarded as an unsupervised teaming to analyze unlabeled data. Semi-supervised clustering uses a small amount of labeled data to predict labels of unlabeled data as well as to improve clustering performance. Previous methods use constraints generated from available labeled data in clustering process. We propose a new constraint-based semi-supervised clustering method by reflecting initial predicted labels of unlabeled data. We evaluate and compare the performance of the proposed method in terms of classification errors through numerical experiments with blinded labeled data.