• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 추계학술대회 논문집
• /
• pp.174-176
• /
• 2007

Because of accident or leak of electricity, high voltage electricity can be conducted to vehicle chassis and damage human. Therefore the unit for detecting ground fault is necessary to minimize loss of life or equipment damage. Isolation resistance must be monitored for detecting ground fault. GFD(Ground Fault Detection) unit continually generate the pulse voltage between high voltage network and chassis. This will be sensing the returned current, calculate the isolation resistance and make decision the ground fault. This paper describes the method detecting ground fault.

• IMMUNE NETWORK
• /
• 제16권3호
• /
• pp.159-164
• /
• 2016

IL-33 is a multifunctional cytokine that is released in response to a variety of intrinsic and extrinsic stimuli. The role of IL-33 in Candida albicans infections is just beginning to be revealed. This cytokine has beneficial effects on host defense against systemic C. albicans infections, and it promotes resistance mechanisms by which the immune system eliminates the invading fungal pathogens; and it also elevates host tolerance by reducing the inflammatory response and thereby, potentially, tissue damage. Thus, IL-33 is classified as a cytokine that has evolved functionally to protect the host from damage by pathogens and immunopathology.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.377-382
• /
• 2001

Mechanical behavior and electrical resistance change of CPDP (carbon particle dispersed plastic) composite consisting of epoxy resin and conductive carbon particle were investigated under monotonic loading and repeated loading-unloading. The electrical resistance almost linearly increased with increasing strain during loading and the residual electrical resistance was observed even after removing load. The value of the residual electrical resistance was dependent on the maximum strain under the applied stress. This result suggests that the estimation of maximum strain (i.e., damage) is possible by the measuring electrical resistance of composite. The behavior of electrical resistance change during and after loading was discussed on the basis of the results of microscopic deformation and fracture observation. Moreover, the relationship between the volume fraction of carbon particle and the electrical resistivity of CPDP was investigated in relation to the percolation theory. Simulation model of percolation structure was established by Monte Carlo method and the simulation result was compared to the experimental results. The electrical resistance change under applied loading was analyzed quantitatively using the percolation equation and a simple model for the critical volume fraction of carbon particle as a function of the mechanical stress. It was revealed that the prediction was in good agreement with the experimental result except in the region near the failure of material.

• 한국강구조학회 논문집
• /
• 제9권1호통권30호
• /
• pp.95-105
• /
• 1997

Structures subjected to strong seismic excitation may undergo inelastic deformation cycles. The resulting cumulative fatigue damage process reduces the ability of structures and components to withstand seismic loads. Yet, the present earthquake resistance design methods focus mainly on the maximum displacement ductility, ignoring the effect of the cyclic responses. The damage parameters closely related to the cumulative damage need to be properly reflected on the aseismic design methods. In this study, two cumulative damage assessment methods derived from the plastic fatigue theory are investigated. The one is based on the hysteretic ductility amplitude, and the other is based on the dissipated hysteretic energy. Both methods can consider the maximum ductility and the cyclic behavior of structural response. The validity of two damage methods has been examined for single degree of freedom structures with various natural frequencies against two different earthquake excitations.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 춘계 학술논문 발표대회
• /
• pp.230-231
• /
• 2014

This study is concerned with the root penetration resistance competence and constructability of a waterproofing and root penetration resistance layer of an eco-bridge which is applied with various types of seeding. For the review of root penetration resistance competence, the competence was tested using herbs, woody plants, and tall trees. As a result, there was no tear of or damage to the waterproofing and root penetration resistance layer as well as the sweeping-down phenomenon of a waterproofing and root penetration resistance layer by soil. Also, the effect of the root growth of herbs, woody plants, and tall trees on the root penetration resistance system was confirmed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.887-888
• /
• 2010

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.145-145
• /
• 2017

Foxglove aphid, Aulacorthum solani (Kaltenbach), is a Hemipteran insect that infected a wide variety of plants worldwide and caused serious yield losses in crops. The objective of this study was to identify the putative genes to foxglove aphid resistance in wild soybean, PI 366121 (Glycine soja Sieb. and Zucc.). One hundred and forty-one F4:8 recombinant inbred lines developed from a cross between susceptible variety, Williams 82 and foxglove aphid resistance wild soybean, PI 366121 were used. The two type of resistance response, antibiosis and antixenosis resistance were evaluated through choice and no-choice test, graded by the degree of total plant damage and primary infestation leaf damage; a genome-wide molecular linkage map was constructed with 29,898 single-nucleotide polymorphism markers utilizing a Axiom(R) 180K soyaSNP array. Using inclusive composite interval mapping analysis for foxglove aphid resistance, one major candidate QTL on chromosome 7 was identified. The major QTL on chromosome 7 showed both antixenosis and antibiosis resistance responses. The newly identified major QTL was consistent with previously reported QTL, Raso2, which showed around 5 times narrow down interval range with 8 candidate genes. Furthermore, total 1,115 soybean varieties including Glycine soja and Glycine max were exposed to germplasm screening, and 31 varieties, which showed significant antibiosis type foxglove aphid resistance were identified. This result could be useful in breeding for new foxglove aphid resistant soybean cultivars and developing novel insecticides.

• 대한토목학회논문집
• /
• 제33권2호
• /
• pp.465-473
• /
• 2013

본 연구에서는 터널에서 발생되는 화재로부터 구조물을 보호하기 위해 내화패널이 부착된 프리캐스트 PSC 슬래브의 내화성능을 조사하기 위해 내화실험이 수행되었다. 내화실험은 독일의 RABT(Richtlinien fur die Ausstatung und den Betrieb von stra${\beta}$entunneln) 화재시간-온도곡선을 적용하여 내화성능을 평가하는 것으로 하였다. ITA(2004)에서 제시하는 기준에 따라 내화성능 시험을 수행한 결과, 콘크리트의 손상을 판단하는 위치인 t=0mm의 최대온도는 $367^{\circ}C$로서 손상한계온도 $380^{\circ}C$(ITA 2004)이하였으며, 철근의 손상을 판단하는 위치인 t=25mm의 최대온도는 $239^{\circ}C$로서 손상 한계온도인 $250^{\circ}C$이하로 나타났다. 실험결과로부터, 25mm두께의 내화패널이 부착된 프리스트레스 슬래브 시험체는 내화성능을 가진 것으로 입증되었다.

• Composites Research
• /
• 제27권6호
• /
• pp.219-224
• /
• 2014

탄소나노튜브(CNT)의 물성은 고분자재료의 기계적, 전도성, 열적 물성을 향상시켜주기 때문에 많은 분야에서 소재개발을 진행 중이다. 본 연구에서는 사전에 CNT 10 wt% 페이스트를 제조하여 나노입자에 대한 분산도와 나노복합재료 생산성을 높일 수 있는 기초 재료를 제조하였다. 제조된 CNT 10 wt% 페이스트를 이용하여 손상 감지용 CNT 나노복합재료를 제조하여 균열에 대한 손상감지능과 균열 보강효과에 대한 영향을 연구하였다. CNT 10 wt% 페이스트를 이용하여 제조된 CNT 1 wt% 나노복합재는 일반 CNT 파우더를 이용하여 CNT 1 wt% 나노복합재료를 제조하였을 경우보다 인장과 굴곡물성이 높음을 확인하였다. CF30wt%/PP에 인위적인 균열을 제조하고, 균열부위에 CNT 나노복합재료를 보강하여 균열 및 파괴 발생 감지능을 균열크기에 따라 전기저항 측정법과 인장물성평가를 통해 분석하였다. CNT 나노복합재료를 균열 부위에 보강하여 CF30wt%/PP의 인장물성을 분석하였을 경우, 균열보강효과가 있었다. 균열크기가 증가함에 따라 CNT 나노복합재료의 보강효과의 증가되었다. 이는 CNT 나노복합재료와 CF30wt%/PP간의 접착면 증가로 균열전파를 지연하기 때문이다. CNT 나노복합재료의 손상감지능에 대해서는 전기저항 평가법으로 분석하였으며, 접착면에서의 분리로 인해 CNT 나노복합재료에 충격이 가해져 높은 전기저항 증가구간을 확인하였다. 손상감지용 CNT 나노복합재료의 균열방지효과와 손상감지에 대한 전기저항 평가법의 가능성을 확인하였다.

• 한국전기전자재료학회논문지
• /
• 제16권4호
• /
• pp.280-285
• /
• 2003

The influence of silicon surface damage on nickel-silicide (NiSi) has been characterized and H$_2$ anneal and TiN rapping has been applied to suppress the electrical, morphological deterioration phenomenon incurred by the surface damage. The substrate surface is intentionally damaged using Ar IBE (Ion beam etching) which can Precisely control the etch depth. The sheet resistance of NiSi increased about 18% by the surface damage, which is proven to be mainly due to the reduced silicide thickness. It is shown that simultaneous application of H: anneal and TiN capping layer is highly effective in suppressing the surface damage effect.