• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2006년도 전기학술대회논문집
• /
• pp.249-250
• /
• 2006

In this paper, hardware design and implementation of digital controller for the High Precision Digital Power Supply (HPDPS) based on Digital Signal Processor (DSP) and Field Programmable Gate Array (FPGA) is presented. Developed digital controller is composed of high resolution Digital Pulse Width Modulation (DPWM) and high resolution analog to digital converter circuit with anti-aliasing filter. And Digital Signal Processor (DSP) has the capability of a few micro-second calculation time for one feedback loop. 32-bit DSP and DPWM with 150[ps] step resolution is used to implement the HPDPS. Also 18-bit 2 mega sample per second ADC board is adopted for the developed digital controller. Also, hardware structure of the developed digital controller and experimental results of the first prototype board for HPDPS is described.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(5)
• /
• pp.95-98
• /
• 2002

This paper presents a study on DSP(TMS320F240) controller design for multi-axes transportation system using BLDC servo motor. This BLDC servo motor controller was realized with DSP(Digital Signal Processor) and IPM (Intelligent Power Module). The multi-axes transportation system needs torque, speed, position control of servo motor for variable action. This paper implements those servo control with vector control and space vector modulation technique. As CPU of controller DSP(TMS320F240) is adopted because, it has PWM(Pulse Width Modulation) waveform generator, A/D(Analog to Digital) converter, SPI(Serial Peripheral Interface) port and input/output port etc. The controller of multi-axes transportation system consists of 3-level hierarchy structure that main host PC manages three sub DSP system which transfer downword command and are monitoring the states of end servo controllers. Each sub DSP system operates eight BLDC servo controllers which control BLDC servo motor using DSP and IPM Between host system and middle digital signal processor communicate with RS-422, between main processor and controller communicate with SPI port.

• Journal of Power Electronics
• /
• 제9권3호
• /
• pp.410-417
• /
• 2009

This paper represents a design and implementation of a digital controller for a multi-phase synchronous buck converter (SBC) using a digital signal processor (DSP). The multi-phase SBC has generally been used for a voltage regulation module (VRM) of a microprocessor because of its high current handling capability at a low output voltage. The VRM requires high control performance of tight output regulation, high slew rate, and load sharing capability of multiple converters. In order to achieve these requirements, the design and implementation of a digital control system for a multi-phase SBC are presented in this paper. The digital PWM generation, current sensing, and voltage and current controller using a DSP TMS320F2812 are considered. The experimental results are provided to show the validity of the implemented digital control system.

• 한국정밀공학회지
• /
• 제19권8호
• /
• pp.155-160
• /
• 2002

In this paper, a controller design for brushless linear motor is implemented. The designed controller is mainly composed of current, speed and position controller, which are carried out by the high-speed digital signal processor (DSP). In addition the PWM inverter is controlled by space voltage PWM method. This system is implemented by using 32-bit DSP (TMS320C31), a high-integrated logic device (EPM7192), and IPM (Intelligent Power Module) for compact and powerful system design. The experimental results show the effective performance of controller for the brushless linear motor.

• 한국소음진동공학회논문집
• /
• 제15권8호
• /
• pp.954-961
• /
• 2005

This paper is concerned with the implementation of auto-tuning positive position feedback controller using a digital signal processor and microcontroller. The main advantage of the positive position feedback controller is that it can control a natural mode of interest by tuning the filter frequency of the positive position feedback controller to the natural frequency of the target mode. However, the positive position feedback controller loses its advantage when mistuned. In this paper, the fast fourier transform algorithm is implemented on the microcontroller whereas the positive position feedback controller is implemented on the digital signal processor. After calculating the frequency which affects the vibrations of structure most, the result is transferred to the digital signal processor. The digital signal processor updates the information on the frequency to be controlled so that it can cope with both internal and external changes. The proposed scheme was installed and tested using a beam equipped with piezoceramic sensor and actuator. The experimental results show that the auto-tuning positive position feedback controller proposed in this paper can suppress vibrations even when the target structure undergoes structural change thus validating the approach.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.498-503
• /
• 2005

This paper is concerned with the implementation of adaptive positive position feedback controller using a digital signal processor and microcontroller The main advantage of the positive position feedback controller is that it can control a natural mode of interest by tuning the filter frequency of the positive position feedback controller to the natural frequency of the target mode. However, the positive position feedback controller loses its advantage when mistuned. In this paper, the fast fourier transform algorithm is implemented on the microcontroller whereas the positive position feedback controller is implemented on the digital signal processor. After calculating the frequency which affects the vibrations of structure most the result is transferred to the digital signal processor. The digital signal processor updates the information on the frequency to be controlled so that it can cope with both internal and external changes. The proposed scheme was installed and tested using a beam equipped with piezoceramic sensor and actuator. The experimental results show that the adaptive positive position feedback controller proposed in this paper can suppress vibrations even when the target structure undergoes structural change thus validating the approach.

• 한국정보통신학회논문지
• /
• 제15권5호
• /
• pp.1207-1212
• /
• 2011

본 논문은 BLDC 서보모터 펌프를 사용하는 PBW(power-by-wire) 시스템을 위한 DSP(Digital Signal Processor) 제어기에 대한 연구를 제시한다. PBW 유압 엑츄에이터는 BLDC 서보모터에 의해 구동되는 유압펌프와 유압 실린더 그리고 제어기로 구현된다. 이 PBW 시스템은 유압 실린더의 선형 추진 동작을 위해 서보 모터의 속도 제어를 필요로 한다. 본 논문에서는 벡터 제어 방법과 MIN-MAX PWM 기술을 활용하는 서보 제어기를 구현한다. 제어기로서, PWM 파형발생기, A/D변환기, SPI(직병렬인터페이스) 포트 그리고 많은 입/출력 포트 등을 가지고 있는 이유로 TMS320F2812 DSP가 채택되었다.

• 대한전기학회논문지:전력기술부문A
• /
• 제52권11호
• /
• pp.647-654
• /
• 2003

As electrical power system has become complicated and enlarged to cope with the increasing electric demand, it has to be expected that higher speed, higher reliability, higher function and higher arithmetic ability in protective relay should be realized. Therefore, in this papers, by hardware design and implementation used DMA controller that transfer blocks of data to any location in the memory map without interfering with CPU operation, CPU utilization is increased effectively, as a result it made possible to implement multi-function digital protective relay which has high trust and high function of protection as well as control and metering for power transformers using single processor(DSP).

• 한국정보통신학회논문지
• /
• 제16권5호
• /
• pp.1095-1101
• /
• 2012

본 논문은 DSP 제어기와 IGBT 구동기를 이용하는 조립과 공급의 자동처리를 위한 BLDC 서보 모터 제어시스템 설계를 제안한다. 조립, 공급 자동처리 시스템은 다양한 동작을 위해 서보모터의 토크, 속도, 위치 제어를 필요로한다. 본 논문은 이러한 서보제어를 벡터제어와 공간벡터 PWM 기법을 이용하여 구현한다. 제어기의 CPU 로서 PWM 파형발생기, A/D 컨버터, SPI 통신 포트 및 많은 입/출력 포트를 갖는 TMS320F240 DSP를 채택하였다. 이 제어시스템은 메인 호스트 PC 가 위로부터의 명령을 전달하고 끝단의 서보제어기의 상태들을 모니터링하는 세 개의 부 DSP시스템을 관리하는 3레벨의 계층적 구조로 이루어져 있다. 각 부 DSP 시스템은 DSP와 IPM을 사용하여 BLDC 서보모터를 제어하는 8개의 BLDC 서보모터제어부를 운영한다. 호스트 시스템과 중간의 DSP는 RS-422을 이용하여 통신하며, 주프로세서와 제어기는 SPI 포트를 이용하여 통신한다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1997년도 전력전자학술대회 논문집
• /
• pp.269-275
• /
• 1997

This paper presents real time digital signal processor(DSP) control of UPS system feeding processor(DSP) control of UPS system feeding nonlinear loads to provide sinusoidal inverter output voltage. The control scheme is composed of an rms voltage compensator, the load current harmonics feed-forward loop for the cancellation of output voltage harmonics, and the output voltage harmonics feedback loop for system stability. The controller employs a Texas Instruments TMS320C40GFL50 DSP.