• Journal of Electrical Engineering and Technology
• /
• 제13권5호
• /
• pp.1886-1900
• /
• 2018

This paper proposes a confronting feedback control structure and controllers for positive output elementary super lift Luo converters (POESLLCs) working in discontinuous conduction mode (DCM). The POESLLC offers the merits like high voltage transfer gain, good efficiency, and minimized coil current and capacitor voltage ripples. The POESLLC working in DCM holds the value of not having right half pole zero (RHPZ) in their control to output transfer function unlike continuous conduction mode (CCM). Also the DCM bestows superlative dynamic response, eliminates the reverse recovery troubles of diode and retains the stability. The proposed control structure involves two controllers respectively to control the voltage (outer) loop and the current (inner) loop to confront the time-varying ON/OFF characteristics of variable structured systems (VSSs) like POESLLC. This study involves two different combination of feedback controllers viz. the proportional integral controller (PIC) plus sliding mode controller (SMC) and the fuzzy logic controller (FLC) plus SMC. The state space averaging modeling of POESLLC in DCM is reviewed first, then design of PIC, FLC and SMC are detailed. The performance of developed controller combinations is studied at different working states of the POESLLC system by MATLAB-Simulink implementation. Further the experimental corroboration is done through implementation of the developed controllers in PIC 16F877A processor. The prototype uses IRF250 MOSFET, IR2110 driver and UF5408 diodes. The results reassured the proficiency of designed FLC plus SMC combination over its counterpart PIC plus SMC.

• International Journal of Computer Science & Network Security
• /
• 제21권12호
• /
• pp.235-247
• /
• 2021

Today, the cloud computing has become a major demand of many organizations. The major reason behind this expansion is due to its cloud's sharing infrastructure with higher computing efficiency, lower cost and higher fle3xibility. But, still the security is being a hurdle that blocks the success of the cloud computing platform. Therefore, a novel Multi-tenant Decentralized Information Flow Control (MT-DIFC) model is introduced in this research work. The proposed system will encapsulate four types of entities: (1) The central authority (CA), (2) The encryption proxy (EP), (3) Cloud server CS and (4) Multi-tenant Cloud virtual machines. Our contribution resides within the encryption proxy (EP). Initially, the trust level of all the users within each of the cloud is computed using the proposed two-stage trust computational model, wherein the user is categorized bas primary and secondary users. The primary and secondary users vary based on the application and data owner's preference. Based on the computed trust level, the access privilege is provided to the cloud users. In EP, the cipher text information flow security strategy is implemented using the blowfish encryption model. For the data encryption as well as decryption, the key generation is the crucial as well as the challenging part. In this research work, a new optimal key generation is carried out within the blowfish encryption Algorithm. In the blowfish encryption Algorithm, both the data encryption as well as decryption is accomplishment using the newly proposed optimal key. The proposed optimal key has been selected using a new Self Improved Cat and Mouse Based Optimizer (SI-CMBO), which has been an advanced version of the standard Cat and Mouse Based Optimizer. The proposed model is validated in terms of encryption time, decryption time, KPA attacks as well.

• PNF and Movement
• /
• 제17권1호
• /
• pp.47-56
• /
• 2019

Purpose: This study investigated the effects of neck pattern of proprioceptive neuromuscular facilitation (PNF) on balance and walking ability in patients with chronic stroke. Methods: Fourteen participants with chronic stroke were randomly assigned to vestibular rehabilitation and then divided into two groups: the neck pattern group or treadmill group. Each group underwent 20 sessions (20 minutes/day, five days/week, for four weeks). Patients were assessed with the Berg balance scale (BBS) and gait parameters (gait speed, cadence, step length, and double-limb support period) using a GAITRite system. Results: Vestibular rehabilitation for the neck pattern group and the treadmill group showed significant intragroup improvement on the BBS and in terms of gait speed, cadence, step length, and double-limb support period (p < 0.05). Vestibular rehabilitation was more effective for the neck pattern group than for the treadmill group in terms of the BBS (p = 0.00; 95% CI, 1.49-5.94), gait speed (p = 0.01; 95% CI, 0.05-0.16), cadence (p = 0.02; 95% CI, 0.54-4.99), and step length (p = 0.00, 95% CI, 1.55-4.62). Conclusion: This study used the neck pattern of PNF for vestibular rehabilitation in patients with chronic stroke. The results showed significant improvement in the patients' balance and walking ability. Therefore, the neck pattern of PNF for vestibular stimulation may be more effective than treadmill training to improve balance and walking ability in patients with chronic stroke.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제9권2호
• /
• pp.25-36
• /
• 2003

The purpose of this study is to trace the historical background and to describe the architectural issues of the healthcare facilities in 1876~1945 years. Between 1876~1895 yr, the first western hospital "Jejung-Won" was built in Seoul by the Korean Gov. with the help of the American Missionary Dr. Allen. The special clinic for curing smallpox, Udu-Kuk was built nationally and the hospitals for infection disease were built in the same periods. In the next stage 1896~1905, 1905~1910 yr, there were many type of facilities such as military hospital, oriental medicine hospital, public hospital for poor people, clinic or hospital for Mission. After being conquered by Japan in 1910~1945, the Japan Healthcare System was directly transferred into Korean system and the healthcare facilities was built by japanese architect. At that time, the Japan healthcare system had been constructed after following the modern European healthcare system. Most healthcare facilities in the age of Japanese imperialist was handed over to the Korean Government in 1950~1960 yr after world war II.

• Nuclear Engineering and Technology
• /
• 제41권1호
• /
• pp.125-134
• /
• 2009

This paper presents details on a tube inspection robotic system and a positioning method of the robot for a steam generator (SG) in nuclear power plants (NPPs). The robotic system is separated into three parts for easy handling, which reduces the radiation exposure during installation. The system has a supporting leg to increase the rigidity of the robot base. Since there are several thousands of tubes to be inspected inside a SG, it is very important to position the tool of the robot at the right tubes even if the robot base is positioned inaccurately during the installation. In order to obtain absolute accuracy of a position, the robot kinematics was mathematically modeled with the modified DH(Denavit-Hartenberg) model and calibrated on site using tube holes as calibration points. To tune the PID gains of a commercial motor driver systematically, the time delay control (TDC) based gain tuning method was adopted. To verify the performance of the robotic system, experiments on a Framatomes 51B Model type SG mockup were undertaken.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1998년도 추계학술대회
• /
• pp.299-300
• /
• 1998

Recently the development of medical modality like as MRI, 3D US, DR etc is very active. Therefore it is more required not only the enhancement of quality in medical service but the improvement of medical system based on quantization, minimization, and optimization of high speed. Especially, as the changing into the digital modality system, it gets to start using ASIC(Application Specific Integrated Circuit) to realize one board system. It requires the implementation of hardware debugging and effective speedy algorithm with more speed and accuracy in order to support and replace existing device. If objected image could be linked to high speed process board with special interface and pre-processed using FPGA, it can be used in real time image processing and protocol of HIS(Hospital Information System). This study can support the basic circuit design of medical image board which is able to realize image processing basically using digitalized medical image, and to interface between existing device and image board containing image processing algorithm.

• 한국수학교육학회지시리즈B:순수및응용수학
• /
• 제27권3호
• /
• pp.137-155
• /
• 2020

Redundancy is commonly employed to improve system reliability. In most situations, components in the standby configurations are assumed statistically similar but independent. In many realistic models, all parts in standby are not treated as identical as they have different failure possibilities. The operational structure of the system has subsystem-1 with five identical components working under 2-out-of-5: G; policy, and the subsystem-2 has two units and functioning under 1-out-of-2: G; policy. Failure rates of units of subsystems are constant and assumed to follow an exponential distribution. Computed results give a new aspect to the scientific community to adopt multi-dimension repair in the form of the copula.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제54권2호
• /
• pp.97-103
• /
• 2005

Most car navigation systems(CNS) estimate the vehicle's location using global positioning system(GPS) or dead reckoning(DR) system. However, the estimated location has undesirable errors because of various noise sources such as unpredictable GPS noises. As a result, the measured position is not lying on the road, although the vehicle is known to be restricted on the road network. The purpose of map matching is to locate the vehicle's position on the road network where the vehicle is most likely to be positioned. In this paper, we analyze some general map matching algorithms first. Then, we propose a map matching method using compensation vectors to improve the performance of map matching. The proposed method calculates a compensation vector from the discrepancy between a measured position and an estimated position. The compensation vector and a newly measured position are to be used to determine the next estimation. To show the performance improvement of the map matching using compensation vectors, the real time map matching experiments are performed. The real road experiments demonstrate the effectiveness and applicability of the proposed map matching.

• Earthquakes and Structures
• /
• 제3권5호
• /
• pp.749-766
• /
• 2012

Structural control through integration of passive damping devices within the building structure has been increasingly implemented internationally in the last years and has proven to be a most promising strategy for earthquake safety. In the present paper an alternative configuration of an innovative energy dissipation mechanism that consists of slender tension only bracing members with closed loop and a hysteretic damper is investigated in its dynamic behavior. The implementation of the adaptable dual control system, ADCS, in frame structures enables a dual function of the component members, leading to two practically uncoupled systems, i.e., the primary frame, responsible for the normal vertical and horizontal forces and the closed bracing-damper mechanism, for the earthquake forces and the necessary energy dissipation. Three representative international earthquake motions of differing frequency contents, duration and peak ground acceleration have been considered for the numerical verification of the effectiveness and properties of the SDOF systems with the proposed ADCS-configuration. The control mechanism may result in significant energy dissipation, when the geometrical and mechanical properties, i.e., stiffness and yield force of the integrated damper, are predefined. An optimum damper ratio, DR, defined as the ratio of the stiffness to the yield force of the hysteretic damper, is proposed to be used along with the stiffness factor of the damper's- to the primary frame's stiffness, in order for the control mechanism to achieve high energy dissipation and at the same time to prevent any increase of the system's maximum base shear and relative displacements. The results are summarized in a preliminary design methodology for ADCS.

• 한국IT서비스학회지
• /
• 제21권6호
• /
• pp.117-125
• /
• 2022

In respond to climate change caused by global environmental problems, countries around the world are actively promoting the advancement of new electricity industries. The new energy business is being applied to energy storage systems (ESS), electric vehicle charging business, and power demand response using cutting edge technologies. In 2022, the Korean government is also establishing a policy stance to foster new energy industries and making efforts to improve its responsiveness to power demand response with the innovative technologies. In Korea, attempts to commercialize energy power are also being made in the private and public sectors to control energy power in houses, buildings, and industries. For example, private companies, local governments, and central government are making all-out efforts to develop new energy industry models through joint investment. There are forms such as establishing energy-independent facilities by region, establishing an electric vehicle charging system, controlling urban lighting systems with Information technologies, and managing demand between power suppliers and power consumers. This study examined the business model applied with energy storage system, electric vehicle charging business, smart lighting, and power demand response based on information communication technology to examine the site where smart energy system was introduced. According to this study, company missions and government tasks are suggested to apply new energy business technologies as economical energy solutions that meet the purpose of use by region, industry, and company.