Browse > Article
http://dx.doi.org/10.5516/NET.2009.41.1.125

DEVELOPMENT OF A STEAM GENERATOR TUBE INSPECTION ROBOT WITH A SUPPORTING LEG  

Shin, Ho-Cheol (Nuclear Robotics Laboratory, Korea Atomic Energy Research Institute)
Jeong, Kyung-Min (Nuclear Robotics Laboratory, Korea Atomic Energy Research Institute)
Jung, Seung-Ho (Nuclear Robotics Laboratory, Korea Atomic Energy Research Institute)
Kim, Seung-Ho (Nuclear Robotics Laboratory, Korea Atomic Energy Research Institute)
Publication Information
Nuclear Engineering and Technology / v.41, no.1, 2009 , pp. 125-134 More about this Journal
Abstract
This paper presents details on a tube inspection robotic system and a positioning method of the robot for a steam generator (SG) in nuclear power plants (NPPs). The robotic system is separated into three parts for easy handling, which reduces the radiation exposure during installation. The system has a supporting leg to increase the rigidity of the robot base. Since there are several thousands of tubes to be inspected inside a SG, it is very important to position the tool of the robot at the right tubes even if the robot base is positioned inaccurately during the installation. In order to obtain absolute accuracy of a position, the robot kinematics was mathematically modeled with the modified DH(Denavit-Hartenberg) model and calibrated on site using tube holes as calibration points. To tune the PID gains of a commercial motor driver systematically, the time delay control (TDC) based gain tuning method was adopted. To verify the performance of the robotic system, experiments on a Framatomes 51B Model type SG mockup were undertaken.
Keywords
Steam Generator Tube Inspection Robot; Robot Calibration; Modified DR Model; Time Delay Control;
Citations & Related Records

Times Cited By Web Of Science : 0  (Related Records In Web of Science)
Times Cited By SCOPUS : 0
연도 인용수 순위
  • Reference
1 “ROSA III: the Westinghouse workhorse”, Nucl. Eng. Int. vol. 36, no. 449, pp. 42-43, 1991
2 S.J. Kang, J.C. Moon, D.H. Choi, S.S. Choi and H.G. Woo, “A distributed and intelligent system approach for the automatic inspection of steam-generator tubes in nuclear power plants”, IEEE Trans. on Nuclear Science, vol. 45, Issue 3, pp. 1713 - 1722, June 1998   DOI   ScienceOn
3 L. Obrutsky, J. Renaud and R. Lakhan, “Steam Generator Inspections: Faster, Cheaper And Better, Are We There Yet?,” IV Pan American Conference for Non Destructive Testing 2007, Buenos Aires, Argentina, Oct. 2007
4 Z. Gan, L. T. Fitzgibbons, Q. Tang and J. S. Katz, “On-line robot work-cell calibration,” US patent 5,751,610, May, 1998
5 S. Hayati and M. Mirmirani. “A software for robot geometry parameter estimation”, SME Paper #MS84-1052, presented at Robots West Conference, Anaheim, CA, November 1984
6 A. McLean et al., “Incremental Roadmaps and Global Path Planning in Evolving Industrial Environments,” ICRA, pp.101~107, 1996
7 B.W. Mooring, Z.S. Roth and M.R. Driels, Fundamentals of Manipulator Calibration, John Wiley & Sons, Inc., 1991
8 P. Tipping, “Lifetime and Ageing Management of Nuclear Power Plants: A Brief Overview of Some Light Water Reactor component Ageing Degradation Problems and Ways of Mitigation”, Int. J. Pres. Ves. & Piping, vol 66, pp. 17-25, 1996   DOI   ScienceOn
9 P.H. Chang, J.H. Jung and J. Lee, “A simple tuning method for robust MIMO PID control,” in CDROM Proc. Int. Conf. Electrical Machines and Syst. (ICEMS), PD-11(630-S01- 015) , 2004
10 S.W. Glass, J.B Fallon, C.F. Reinholtz and A.L. Abbott, “Machine Vision Calibration for a Nuclear Steam Generator Robot”, Robotics and Remote Systems, pp. 512-513, 1994
11 The development of an inspection/maintenance robot for steam generator tubes, KAERI, KAERI/RR-2324/2002, 2002
12 P. J. Hawkins and L. J. Petrosky, “Miniature manipulator for servicing the interior of nuclear steam generator tubes”, US patent US7,314,343 B2, Jan., 2008
13 K. Youcef-Toumi and O. Ito, “A time delay controller for systems with unknown dynamics”, Trans. Of ASME, J. Dyn. Sys., Meas., Contr., vol. 112, no. 1, pp. 133-142, 1990   DOI
14 B. Birgmajer, Z. Kovacic and Z. Postruzin, “Integrated Vision System for Supervision and Guidance of a Steam Generator Tube Inspection Manipulator,” IEEE Int. Conf. on Control Applications, pp. 644~649, Munich, Germany, Oct. 2006   DOI
15 EPRI NDE Center, Advanced Eddy Current Data Analysis Techniques for Steam Generator Tubing, 1984
16 J. Miyafuchi, K. Tabuchi and T. Yamamoto, “Towards maintenance service supporting secure nuclear energy”, Mitsubishi Heavy Industries, Ltd. Technical Review, vol. 40, no. 2, Apr., 2003