• Journal of Sensor Science and Technology
• /
• v.31 no.1
• /
• pp.41-44
• /
• 2022

In this study, we have fabricated and characterized vertical double-gate (DG) InGaAs tunnel field-effect-transistors (TFETs) with Al₂O₃/HfO₂ = 1/5 nm bi-layer gate dielectric by employing a top-down approach. The device exhibited excellent characteristics including a minimum subthreshold swing of 60 mV/decade, a maximum transconductance of 141 µS/㎛, and an on/off current ratio of over 10³ at 20℃. Although the TFETs were fabricated using a dry etch-based top-down approach, the values of DIBL and hysteresis were as low as 40 mV/V and below 10 mV, respectively. By evaluating the effects of constant voltage and hot carrier injection stress on the vertical DG InGaAs TFET, we have identified the dominant charge trapping mechanism in TFETs.

• Korean Journal of Applied Biomechanics
• /
• v.16 no.1
• /
• pp.109-117
• /
• 2006

The purpose of this study was done in order to investigate the Kinematical variables of the Rybalko motion on the Horizontal bar using the 3-dimensional cinematographic method. For this study, three excellent athletes take part in a 2003 Daegue universid game were chosen. The subject,s Rybalko motion was filmed with S-VHS camera at the speed of 60 fields per second and digitized the each fields. And the Kwon3D 3.1 version program was employed to obtain 3-dimensional data. As a result of this study. 1. A total time spent for performing Rybalko skill was Mean $2.52{\pm}0.13sec$. From starting down swing to releasing right hand the Mean $0.84{\pm}0.24sec$ was taken. 2. In the event 3 of Rybalko motion, that is, the moment which the right-hand is released on the bar, the center of mass must is employed at the position above the horizontal line of bar. In this research, the average vertical displacement(z axe) of center of mass shows $47.87{\pm}3.14cm$. 3. In the event 5, that is, the moment which the right-hand is catched again on the bar, the center of mass is employed at the position before the vertical line of bar. In this research, the average horizontal displacement(z axe) of center of mass shows $47.87{\pm}3.14cm$. 4. It has been seen that, at the moment of release of right-hand, lateral variation of center of mass is 13.395cm, vertical variation of center of mass is 7.41cm Thus, it is concluded that lateral variation of center of mass should be reduced for high grade to be acquired. 5. It has been founded that high speed of down swing influences speed of up swing, and that, in the motion of twist, the horizontal speed is little changed.

• The KIPS Transactions:PartB
• /
• v.12B no.5 s.101
• /
• pp.561-566
• /
• 2005

This paper presents a visual tracking algorithm for the golf swing motion analysis by using the information of the pixels of video frames and movement of the golf club to solve the problem fixed center point in model based tracking method. The model based tracking method use the polynomial function for trajectory displaying of upswing and downswing. Therefore it is under the hypothesis of the no movement of the center of gravity so this method is not for the amateurs. we proposed method using the information of pixel and movement, we first detected the motion by using the information of pixel in the frames in golf swing motion. Then we extracted the club head and hand by a properties of club shaft that consist of the parallel line and the moved location of club in up-swing and down-swing. In addition, we can extract the center point of user by tracking center point of the line between center of head and both foots. And we made an experiment with data that movement of center point is big. Finally, we can track the real trajectory of club head, hand and center point by using proposed tracking algorithm.

• Korean Journal of Applied Biomechanics
• /
• v.24 no.4
• /
• pp.339-347
• /
• 2014

The purpose of this study was to investigate joint torques of lower body segments on professional golfers. Three dimensional swing analysis was conducted on the seven subjects. Each subject was asked to swing with 45 inches of Callaway driver, where two force plates (9286AA, Kistler, Switzerland) were built, with his normal speed and tempo. The resultant joint moments of the lower extremities were computed using the kinematic variables of the segments, anthropometric measures and the ground reaction force data by inverse dynamics method. Based on the results of this study, the following conclusions were drawn; It was found that the left ankle joint torque at 3rd phase was increased toward extension on the X-axis and abduction on the Y-axis. The left knee joint torque was alternated from flexion to extension direction in order to lower down the body weight at the beginning of the downswing. The lumbar joint torque was alternated from flexion to extension in order to speed up the upper body rotation which could increase the club head speed ultimately.

• Korean Journal of Applied Biomechanics
• /
• v.12 no.2
• /
• pp.33-49
• /
• 2002

This study was intended to provide basic materials for golf coaching by somatotype by analyzing and comparing the kinematic factors found in each somatotype at the time of golf swing. For this purpose, the somatotype was divided into endomorph, mesomorph and ectomorph in reference to the weight, height and upper arm circumference of each of nine professional golfers. Each of their swing motions was videotaped with the camcorder and their swing motion was analyzed by dividing it into 8 sections. The time required for the swing motion, the displacement of the center of the human body and the rotation angle of the upper body were calculated through the three-dimensional image analysis based on the DLT(Direct Linear Transformation). Based on the findings of this study, the following conclusion was drawn: The endomorphic golfers showed the longest required golf swing time, followed by the mesomorphic golfer and then the endomorphic golfer. The displacement of left-to-right movement was largest in the mesomorphic golfers, followed by the endomorphic golfers the up-to-down displacement was upward at the time of impact and that the endomorphic and mesomorphic golfers raised the sense of stability by maintaining an almost uniform height at the time of impact. As for the rotational angle of the upper body and the rotational angle of the thigh, the upper body and the thigh took a form of rotating earlier in the ectomorphic golfers at the time of impact, who showed a somewhat different characteristics compared to the endomorphic and mesomorphic golfers. It is necessary to investigate the movement of more fundamental forces in presenting the theory related to the kinematic characteristics of this swing by somatotype. Accordingly, it is thought that it is necessary to analyze the center of pressure(COP) using the ground counterforce in the future study.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.3
• /
• pp.90-98
• /
• 2001

In this paper, the development of exclusive control valve for improving the performance of truck cab tilting system is discussed. Cab tilting system is implemented to the heavy truck for the convenience of driver. However when tilting up or down, sudden swing of cab has brought discredit on user. To improve this phenomena it is inevitable to use counter balance valve. But because of high pressure and low flow characteristic, general counter balance valve is unsuitable to cab tilting system. Therefore, this paper presents the developments of exclusive return pressure control valve which prevents sudden swing of cab and verify the validity of design through the computer simulation.

• Journal of The Korean Society of Integrative Medicine
• /
• v.2 no.3
• /
• pp.57-63
• /
• 2014

Purpose : The purpose of this study was to identify the muscle activity of leg during stair down in the subjects with flatfoot and normal foot. Methods : The fourteen subjects with the flatfoot group and the fifteen subjects with the normal foot group volunteered for this study. All subjects descended the stairs that the height was 20cm and consisted 25 stairs. The target muscles for recording muscle activity were posterior fiber of gluteus medius, vastus medialis and vastus lateralis oblique, semitendinosus and biceps femoris, tibialis anterior, and medial and lateral fiber of gastrocnemius muscles. The muscle activity was recorded using the wireless EMG system. Results : The flatfoot group had significantly lower the muscle activity of posterior fiber of gluteus medius than the normal foot group in stance phase during stair down(p<.05). The flatfoot group had significantly higher the muscle activity of biceps femoris and tibialis anterior than the normal foot group in swing phase during stair down(p<.05). Conclusions : This study proposed that the subject with flatfoot should train the strengthening exercise for posterior fiber of gluteus medius.

• Korean Journal of Applied Biomechanics
• /
• v.16 no.3
• /
• pp.33-41
• /
• 2006

This study was to analysis three dimension angle of the upper extremity segment and trunk to putting the protector in women bowlers. For this study, the subjects selected 4 players of national and university team. All subjects putted in the same wrist support to satisfy the experiment conditions. To get three dimensions position coordination of swing motion used for 6 ProReflex MCU 240 camera produced by Qualisys. After position coordination calculation, Three dimension angle of the trunk and the upper extremity segment calculated for Matlab 6.5. the result is following; In the trunk motion, there were little differences among the subjects in a flexion and extension change. There were a lot of differences in motion change of the abduction-adduction and internal-external rotation, but the motion types translated to the adduction-abduction-adduction and from the internal rotation toward the external rotation. In the upper arm segment the Flexion and extension showed a consistent motion in the down swing and up swing phase. And the motion change of abduction-adduction and pronation-supination showed a abduction-adduction-abduction and pronation-supination change during swing phase. In the forearm segment changes, it showed a lot of differences among the subjects and a similar change with the upper arm segment. Especially, the hand segment showed a supination motion from the backswing apex to release phase, but for increasing a rotation velocity of ball, the hand segment translated toward pronation in follow throw phase.

• Korean Journal of Applied Biomechanics
• /
• v.18 no.3
• /
• pp.43-80
• /
• 2008

The purpose of this research is to analysis the swing of driver used by professional golfers during on-season. In order to collect on-season driver swings of research objects, which are three KPGA(Korean Professional Golfer Association) professional golfers, measurements were carried out right after the last game of a season. The analysis range was set to down-swing point while analysis was conducted to after-impact, release point. As a result, systematic process between leading segments of the previous precise kinematic analysis research seems to turn up the same. However, there were different results compared to the preceding research. All three testers expressed adduction of left hand which could not be described with forming cocking angle, in consequence, adduction of left hand does not have a big effect on formation of cocking. Moreover, chest movement right before the impact; which was emphasized in previous research, the direction was not opposite but the same with the ball.

• Korean Journal of Applied Biomechanics
• /
• v.14 no.2
• /
• pp.27-40
• /
• 2004

The objective of this study is to identify the kinematic variables of giant swing backward to handstand as well as individual variations of each athlete performing this skill, which in turn will provide the basis for developing suitable training methods and for improving athlete's performance in actual games. For this end, 3 male athletes, members of the national team, who are in ${\Box}{\Box}H{\Box}{\Box}$ University, have been randomly chosen and their giant swing backward to handstand performance was recorded using two digital cameras and analyzed in 3 dimensional graphics. This study came to the following conclusion. 1. Proper time allocation for giant swing backward to handstand are: Phase 1 should provide enough time to attain energy for swing track of a grand round movement. The phase 3 is to throw the body up high in the air and stay in the air as long as possible to smoothen up the transition to the next stage and the phase 4 should be kept short with the moment arm coefficient of the body reduced. 2. As for appropriate changes of locations of body center, the phase 1 should be comprised of horizontal, perpendicular, compositional to make up a big rotational radius. Up to the Phase 3 the changes of displacements of vertical locations should be a good scale and athlete's body should go up high quickly to increase the perpendicular climbing power 3. When it comes to the speed changes of body center, the vertical and horizontal speed should be spurred by the reaction of the body in Phase 2 and Phase 3. In the Phase 4, fast vertical speed throws the body center up high to ensure enough time for in-the-air movement. 4. The changes of angles of body center are: in Phase 2, shoulder joint is stretching and coxa should be curved up to utilize the body reaction. In the Phase 4, shoulder joint and coxa should be stretched out to get the body center as high as possible in the air for stable landing. 5. The speeds of changes in joints angles are: in the Phase 2 should have the speed of angles of shoulder joints increase to get the body up in the air as quickly as possible. The Phase 3 should have the speed of angles in shoulder joint slow down, while putting the angles of a knee joint up to speed as quickly as possible to ensure enough time for in-the-air movement.