• 한국도로학회논문집
• /
• 제16권3호
• /
• pp.35-41
• /
• 2014

PURPOSES : The dynamic modulus for a specimen can be determined by using either the non-destructed or destructed testing method. The Impact Resonance Testing (IRT) is the one of the non-destructed testing methods. The MTS has proved the source credibility and has the disadvantages which indicate the expensive equipment to operate and need a lot of manpower to manufacture the specimens because of the low repeatability with an experiment. To overcome these shortcomings from MTS, the objective of this paper is to compare the dynamic modulus obtained from IRT with MTS result and prove the source credibility. METHODS : The dynamic modulus obtained from IRT could be determined by using the Resonance Frequency (RF) from the Frequency Response Function (FRF) that derived from the Fourier Transform based on the Frequency Analysis of the Digital Signal Processing (DSP)(S. O. Oyadigi; 1985). The RF values are verified from the Coherence Function (CF). To estimate the error, the Root Mean Squared Error (RMSE) method could be used. RESULTS : The dynamic modulus data obtained from IRT have the maximum error of 8%, and RMSE of 2,000MPa compared to the dynamic modulus measured by the Dynamic Modulus Testing (DMT) of MTS testing machine. CONCLUSIONS : The IRT testing method needs the prediction model of the dynamic modulus for a Linear Visco-Elastic (LVE) specimen to improve the suitability.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2007년 가을학술발표회
• /
• pp.623-634
• /
• 2007

The aim of this research is development and verification of resistivity seismic dilatometer (RSDMT) system. The resistivity module for obtaining resistivity-depth plot and seismic module for obtaining wave velocity-depth plot are attached to the conventional flat dilatometer testing equipment. To enhance reliability and repeatability of seismic part in RSDMT, automatic testing system including automatic surface source, PC based data acquisition system and operating program were developed. To obtain real resistivity value of soil, geometric factor for the array of electrodes in RSDMT was derived empirically. The verification studies for the developed RSDMT system were performed at the southeast side of Korea where soil improvement work is planned. SPT, CPT, geophysical subsurface imaging techniques and some laboratory tests were performed for the comparisons. As one penetration of RSDMT, various soil parameters could be obtained. The results of field test showed good repeatability and reliability in every part. From these studies, developed RSDMT system was checked and the effectiveness of this system was verified in light of proper evaluation of geotechnical characteristics of soft soil.

• 대한기계학회논문집A
• /
• 제38권8호
• /
• pp.881-886
• /
• 2014

5 축 기반 3 차원 금속 프린팅에서는 파트형상에 overhang/undercut 형상이 존재하여도 tilting과 rotating의 2 축을 이용하여 파트형상의 조형 방향을 자유롭게 바꾸어 지지구조물(support structure) 형상피처의 추가 없이 3-D 적층(3DL: 3-D layering)이 가능하게 된다. 이를 위해서는 overhang/undercut의 형상근처에서 국부적으로 tilting과 rotating 정보에 맞는 조형 층 적층 정보를 제공하는 새로운 전처리기(preprocessor) 기능이 필요하게 된다. 본 논문에서는 overhang/undercut 과 같은 형상들을 자동으로 진단하고 검출하여 3 차원 layering 이 가능할 수 있도록 방사형 기울기 측정법(calculation of radial gradient: CRG)과 은유적 자동 분할 알고리듬(implicit auto-partitioning algorithm: IAP)을 통해 다중 적층 알고리듬(Multi-part Layering Algorithm: MPL)을 구현함을 제시하고 이를 실제 STL 형상파일에 적용하여 제시된 이론을 검증하고자 하였다.

• 한국산학기술학회논문지
• /
• 제15권3호
• /
• pp.1279-1287
• /
• 2014

한국 정부는 부산신항을 세계 2위의 환적중심 항만으로 육성하기 위한 정책 목표를 수립하고 있다. 본 논문은 이와 같은 정책 목표 달성의 한 가지 방법으로 타부두 환적의 효율적인 처리방안 제시를 목적으로 한다. 본 논문에서는 먼저 부산신항의 타부두 환적 물동량에 대한 장기 예측결과를 제시한다. 다음 부산신항의 타부두 환적을 처리할 수 있는 시스템적 대안으로 Double stack Multiple Trailer System(DMTS)와 궤도식 시스템 대안을 제시한다. 각 시스템 대안의 부산신항에 적용방법을 소개하고, 예측된 타부두 환적 물동량을 처리하기 위한 대안별 시스템 소요량 및 도입비용을 산출한다. 특히, DMTS의 경제성 분석결과 B/C = 3.7을 확보할 것으로 예상되고, 재무성 분석결과 현행 톤${\cdot}km$ 당 요금을 현행 대비 67%까지 인하할 수 있어 부산신항 타부두 환적을 효율적으로 처리할 수 있는 유력한 대안으로 판단된다.

• Corrosion Science and Technology
• /
• 제17권1호
• /
• pp.20-29
• /
• 2018

Ti and its alloys show the excellent corrosion resistance to chloride environments, but they show less corrosion resistance in HCl, $H_2SO_4$, NaOH, $H_3PO_4$, and especially HF environments at high temperature and concentration. In this study, we used the commercially pure titanium and Ti-6Al-4V alloy, and evaluated the effect of the manufacturing process on the electrochemical properties. We used commercial products of rolled and forged materials, and made additive manufactured materials by DMT (Directed Metal Tooling) method. We annealed each specimen at $760^{\circ}C$ for one hour and then air cooled. We performed anodic polarization test, AC impedance measurement, and Mott-Schottky plot to evaluate the electrochemical properties. Despite of the difference of its microstructure of CP-Ti and Ti-6Al-4V alloys by the manufacturing process, the anodic polarization behavior was similar in 20% sulfuric acid. However, the addition of 0.1% hydrofluoric acid degraded the electrochemical properties. Among three kinds of the manufacturing process, the electrochemical properties of additive manufactured CP-Ti, and Ti-6Al-4V alloys were the lowest. It is noted that the test materials showed a Warburg impedance in HF acid environments.

• 대한화학회지
• /
• 제29권6호
• /
• pp.599-607
• /
• 1985

Thioacetamide(TA) - CC$l_4$ 용액과 TA- DMP - CC$l_4$ 용액에 대한 $ν_3$ + Amide II 조합띠의 근적외선 스펙트럼을 5 ~ 55${\circ}C$ 범위에서 얻었다. 이 띠 부근에서 생기는 DMP와 용매의 약한 흡수띠는 대조액을 사용하여 보상하였다. 복합된 스펙트럼은 콤퓨터를 사용하여 각 띠의 형태를 Lorentzian-Gaussian 곱의 함수로 보아 두 개의 띠로 분리하였고 이는 각각 TA 단위체와 TA-DMP의 1:1 복합체 임을 확인하였다. 매우 묽은 CC$l_4$ 용액 중에서 TA-DMP 농도 및 온도 의존스펙트럼을 분석하여 TA와 DMP 간의 수소결합에 대한 평형상수와 열역학적 파라미터를 구하였다. TA와 DMP 간의 $ΔH{\circ}는 -14.6 kJmol^{-1}$이었고 $ΔS{\circ}는 -16.2 Jmol^{-1}$de$g^{-1}$이었다.

• 한국통신학회논문지
• /
• 제27권10C호
• /
• pp.963-972
• /
• 2002

DMT 기반의 VDSL 모뎀, OFDM 방식의 DVB 모뎀 등 다중 반송파 변조 시스템에서 핵심 블록으로 사용되는 8192점 FFT/IFFT 프로세서를 설계하였다. 새로운 2단계 수렴 블록 부동점 (two-step convergent block floating-point; TS_CBFP) 스케일링 방법을 제안하여 설계에 적용하였으며, 이를 통해 FFT/IFFT 출력의 신호 대 양자화 잡음 비 (signal-to-quantization-noise ratio; SQNR)가 크게 향상되도록 하였다. 제안된 TS_CBFP 스케일링 방법은 별도의 버퍼 메모리를 사용하지 않아 기존의 방법에 비해 메모리를 약 80% 정도 감소시키며, 따라서 칩 면적과 전력소모를 크게 줄일 수 있다. 입력 10-비트, 내부 데이터와 회전인자 14-비트, 그리고 출력 16-비트로 설계된 8192점 FFT/IFFT 코어는 약 60-㏈의 SQNR 성능을 갖는다. 0.25-$\mu\textrm{m}$ CMOS 셀 라이브러리로 합성한 결과. 약 76,300 게이트와 390K 비트의 RAM, 그리고 39K 비트의 ROM으로 구현되었다. 시뮬레이션 결과, 50-MHzⓐ2.5-V로 안전하게 동작할 것으로 평가되었으며, 8192점 FFT/IFFT 연산에 약 164-$\mu\textrm{s}$가 소요될 것으로 예상된다. 설계된 코어는 Xilinx FPGA에 구현하여 정상 동작함을 확인하였다.

• 열처리공학회지
• /
• 제34권2호
• /
• pp.66-74
• /
• 2021

Cladding material, which can selectively obtain excellent properties of different metals, is a composite material that combines two or more types of dissimilar metals into one plate. The titanium-copper cladding material between titanium which has excellent corrosion resistance and copper which has high thermal and electrical conductivity, are highly valuable composite materials. It can be used as heat exchangers with high conductivity under severe corrosion conditions. In order to apply the clad plate to the heat exchanger, it must be manufactured in the form of a tube and additional welding is required. It is important to select the cladding material manufacturing process and the welding process. The process of manufacturing the cladding material includes extrusion, rolling, and explosive bonding. Among them, the explosive bonding process is suitable for additional welding because no heat-affected zone is formed. In this study TIG welding of the explosive-bonded dissimilar clad plates was successfully performed by butt welding. The microstructures and bonding interface of the welded part were observed, and the effect of the bonding layer at the welding interface and the intermetallic compounds on the mechanical properties and tensile plastic deformation behaviors were analyzed. And also the integrity of TIG-welded dissimilar part was evaluated.

• 한국치위생학회지
• /
• 제3권1호
• /
• pp.13-24
• /
• 2003

The researcher worked with a total of 158 high school girls visiting the scaling practice room at the department of dental hygiene in Jinju Health college from November 11, 2002 to December 4, 2002, having their teeth scaled, observing their teeth and interviewing them with the aid of questionnaires. The findings can be summarized as follows. 1. The survey on the understanding of dental health and the attitudes of the subjects shows the following results : "I have never learned how to brush teeth" (65.8%: 104 girls); "I brush my teeth twice a day" (57.0%: 90 girls) : "I brush my teeth for 2 minutes"(44.3%: 70 girls): "I brush my teeth vertically and horizontally" (53.2%: 84 girls): "( brush my teeth, gum and tongue" (462%: 73 girls): "I use one brush for two months" (40.5%: 64 girls); "I don't have any floss" (582%: 92 girls): "I have never had my teeth scaled" (84.2%: 133girls) : "Smoking is bad for the teeth" (77.8%: 123 girls): "Drinking is bad for the teeth" (48.7%: 77 girls): "I have ever visited dental clinics" (92.4%: 146 girls). 2. The study on part of the teeth most exposed to caries shows the following results : Mandibular right first molar(79.8%: 126 girls): Mandibular left first molar(77.5%: 124 girls), Mandibular left second molar(70.2%: 111 girls). Mandibular right second molar(65.7%: 104 girls). Maxillary left first molar(59.5%: 94 girls): Maxillary left second molar(59.5%: 94 girls): Maxillary right first molar(58.2%: 92 girls). Maxillary right second molar(50.7%: 80 girls) 3. The statistics on the subjects' caries show the following results: DMF rate: 943%: DMFT rate: 25.61%: DMFT index: 7.17 teeth : DT rate: 4651%: FT rate: 52.25%: MT rate: 124% 4. The survey on dental caries statistics, dental health, dental health behavior, and the subjects' attitudes shows the following results: The worse the subjects' dental health was(r=-327, p<.001), the more they visited dental clinics(r=.195, p<.05), the higher DMT rate, DMFT index were; The more the subjects visited dental clinics(r =.359, p<.001), the higher DT rate was; The worse the subjects teeth went(r=-.197, p<.05), the higher MT rate was. It is necessary that systematic and substantial dental health education for high school students should be carried out in regard to plaque control, fluoride application, diet control, pit & fissure sealant as a part of developing national health policies designed for the dental health of the teenagers.

• Toxicological Research
• /
• 제23권3호
• /
• pp.279-287
• /
• 2007

Copper (Cu) is an essential trace element indispensable for brain development and function; either excess or deficiency in Cu can cause brain malfunction. While it is known that Cu and Fe homeostasis are strictly regulated in the brain, the question as to how systemic Fe status may influence brain Cu distribution was poorly understood. This study was designed to test the hypothesis that dietary Fe condition affects Cu transport into the brain, leading to an altered brain distribution of Cu. Rats were divided into 3 groups; an Fe-deficient (Fe-D) group which received an Fe-D diet ($3{\sim}5 mg$ Fe/kg), a control group that was fed with normal diet (35mg Fe/kg), and an Fe-overload group whose diet contained an Fe-O diet (20g carbonyl Fe/kg). Following a 4-week treatment, the concentration of Cu/Fe in serum, CSF (cerebrospinal fluid) and brain were determined by AAS, and the uptake rates of Cu into choroids plexus (CP), CSF, brain capillary and parenchyma were determined by an in situ brain perfusion, followed by capillary depletion. In Fe-D and Fe-O, serum Fe level decreased by 91% (p<0.01) and increased by 131% (p<0.01), respectively, in comparison to controls. Fe concentrations in all brain regions tested (frontal cortex, striatum, hippocampus, mid brain, and cerebellum) were lower than those of controls in Fe-D rats (p<0.05), but not changed in Fe-O rats. In Fe-D animals, serum and CSF Cu were not affected, while brain Cu levels in all tested regions (frontal cortex, striatum, hippocampus, mid brain, and cerebellum) were significantly increased (p<0.05). Likewise, the unidirectional transport rate constants $(K_{in})$ of Cu in CP, CSF, brain capillary and parenchyma were significantly increased (p<0.05) in the Fe-D rats. In contrast, with Fe-O, serum, CSF and brain Cu concentrations were significantly decreased as compared to controls (p<0.05). Cu transport was no significant change of Cu transport of serum in Fe-O rats. The mRNA levels of five Cu-related transporters were not affected by Fe status except DMT1 in the CP, which was increased in Fe-D and decreased in Fe-O. Our data suggest that Cu transport into brain and ensuing brain Cu levels are regulated by systemic Fe status. Fe deficiency appears to augment Cu transport by brain barriers, leading to an accumulation of Cu in brain parenchyma.