DOI QR코드

DOI QR Code

Evaluation of Welding Soundness of Titanium-Copper Explosive-Bonded Dissimilar Clad Plate by TIG Welding

타이타늄-구리 폭발압접 이종 클래드 판재의 TIG 용접 건전성 평가

  • Jo, Pyeong-Seok (Department of Materials Science and Metallurgical Engineering, Sunchon National University) ;
  • Youn, Chang-Seok (DMT Co.) ;
  • Hwang, Hyo-Woon (Department of Materials Science and Metallurgical Engineering, Sunchon National University) ;
  • Lee, Dong-Geun (Department of Materials Science and Metallurgical Engineering, Sunchon National University)
  • Received : 2021.02.25
  • Accepted : 2021.03.09
  • Published : 2021.03.30

Abstract

Cladding material, which can selectively obtain excellent properties of different metals, is a composite material that combines two or more types of dissimilar metals into one plate. The titanium-copper cladding material between titanium which has excellent corrosion resistance and copper which has high thermal and electrical conductivity, are highly valuable composite materials. It can be used as heat exchangers with high conductivity under severe corrosion conditions. In order to apply the clad plate to the heat exchanger, it must be manufactured in the form of a tube and additional welding is required. It is important to select the cladding material manufacturing process and the welding process. The process of manufacturing the cladding material includes extrusion, rolling, and explosive bonding. Among them, the explosive bonding process is suitable for additional welding because no heat-affected zone is formed. In this study TIG welding of the explosive-bonded dissimilar clad plates was successfully performed by butt welding. The microstructures and bonding interface of the welded part were observed, and the effect of the bonding layer at the welding interface and the intermetallic compounds on the mechanical properties and tensile plastic deformation behaviors were analyzed. And also the integrity of TIG-welded dissimilar part was evaluated.

Keywords

References

  1. Ho-Jeong Kim, A Study on Air Pollution and Greenhouse Gas Reduction by Construction of Industrial Complex Waste Heat Exchange Network, Doctoral dissertation, Suwon University, 2012.
  2. Kuznicka, Erosion-corrosion of heat exchanger tubes, Institute of Materials Science and Applied Mechanics, Wroclaw University of Technology, 50-370 Wroclaw, Poland.
  3. C. G. Munger and L. D. Vincent, Corrosion Prevention By Protective Coatings, 2nd ed., NACE, Houston, 1999.
  4. R. J. Brodd and V. E. Leger, Encyclopedia of Electrochemistry of the Elements, A. J. Bard, Editor, Marcel Decker Inc., New York, 1976.
  5. T. K. Ross and J. Lingard : Met. Finish., 40 (1983) 186.
  6. Yang-Kyun Park, Mechanical & Chemical Properties of Ti-Cu Clad Sheet by Cladding Method, Paper of masters degree, Materials Metallurgical Engineering, Sunchon National University, Suncheon 57922, Republic of Korea, 2018.
  7. B. Y. Kang, H. J. Kim : The Basic Theory and Characteristics of Explosive Welding, J. Welding and Joining, 11 (1993) 1.
  8. Kyung-Man Moon, Yun-Hae Kim, Jong-Do Kim, Myung-Hoon Lee and Jin-Gyeong Kim, Electrochemical Evaluation of Corrosion Property of Welding Zone of 304 Stainless Steel, THe Korean Society of Ocean Engineers, Vol. 23, No. 4, pp58-63, Aug, 2009 (LSSN 1225-0767).
  9. Dong-Geun Lee, Yong Tai Lee, High Efficiency Welding Technology of Titanium Alloy, The Korean Welding and Joining Society, Vol. 25, No. 5, Oct 2007.
  10. In-Cheol Jung, Young-Jae Kim, Kyeong-Woon Lee, Deok-Nam Sim, The Comparison of Characteristic between Electron Beam Welding and Narrow-gap TIG welding with 316LN Stainless Steel, The Korean Welding and Joining Society, 44, 2005.6, 82-84(3 pages).
  11. Yong-Gir Kim, Dong-Seok Chung, Cha-Hurn Bae, The Influence of Welding Conditions on Mechanical Properties and Microstructural Change of TIG Welded Joint in Stress Relief Heat Treated Mg-AZ31B Alloy, J. of the Korean Society for Heat Treatment, Vol. 17, No. 4, (2004) pp. 230-235.
  12. YOSHIAKI IIJMA, KAZUTOMO HOSHINO and KEN-ICHI HIRANO, Diffusion of Titanium in Copper, Metall. Trans. A8A (1977) 997-1001.
  13. Chang-Suk Youn, Dong-geun Lee, Effects of Post Heat Treatment on the Mechanical Properties of Cold-Rolled Ti/Cu Clad Sheet, Metals 2020, 10, 1672; doi:10.3390/met10121672
  14. Woo-Hyun Song, Dong-Han Seo and Jang-Yong Yoo, Development Trend of Linepipe Steel and It's Weldability, Journal of KWJS, Vol. 27, No. 1, February, 2009.
  15. Ki-Weon Kang, Byung-Jei Lee, Kyung-Young Jang, Jung-Kyu Kim, Failure analysis and evaluation of strength properties on brazed joints, The Korean Society of Mechanical Engineers, 2005, 94-99 (6pages).