1 |
Ho-Jeong Kim, A Study on Air Pollution and Greenhouse Gas Reduction by Construction of Industrial Complex Waste Heat Exchange Network, Doctoral dissertation, Suwon University, 2012.
|
2 |
Kuznicka, Erosion-corrosion of heat exchanger tubes, Institute of Materials Science and Applied Mechanics, Wroclaw University of Technology, 50-370 Wroclaw, Poland.
|
3 |
C. G. Munger and L. D. Vincent, Corrosion Prevention By Protective Coatings, 2nd ed., NACE, Houston, 1999.
|
4 |
R. J. Brodd and V. E. Leger, Encyclopedia of Electrochemistry of the Elements, A. J. Bard, Editor, Marcel Decker Inc., New York, 1976.
|
5 |
T. K. Ross and J. Lingard : Met. Finish., 40 (1983) 186.
|
6 |
Yang-Kyun Park, Mechanical & Chemical Properties of Ti-Cu Clad Sheet by Cladding Method, Paper of masters degree, Materials Metallurgical Engineering, Sunchon National University, Suncheon 57922, Republic of Korea, 2018.
|
7 |
B. Y. Kang, H. J. Kim : The Basic Theory and Characteristics of Explosive Welding, J. Welding and Joining, 11 (1993) 1.
|
8 |
Kyung-Man Moon, Yun-Hae Kim, Jong-Do Kim, Myung-Hoon Lee and Jin-Gyeong Kim, Electrochemical Evaluation of Corrosion Property of Welding Zone of 304 Stainless Steel, THe Korean Society of Ocean Engineers, Vol. 23, No. 4, pp58-63, Aug, 2009 (LSSN 1225-0767).
|
9 |
Dong-Geun Lee, Yong Tai Lee, High Efficiency Welding Technology of Titanium Alloy, The Korean Welding and Joining Society, Vol. 25, No. 5, Oct 2007.
|
10 |
In-Cheol Jung, Young-Jae Kim, Kyeong-Woon Lee, Deok-Nam Sim, The Comparison of Characteristic between Electron Beam Welding and Narrow-gap TIG welding with 316LN Stainless Steel, The Korean Welding and Joining Society, 44, 2005.6, 82-84(3 pages).
|
11 |
Yong-Gir Kim, Dong-Seok Chung, Cha-Hurn Bae, The Influence of Welding Conditions on Mechanical Properties and Microstructural Change of TIG Welded Joint in Stress Relief Heat Treated Mg-AZ31B Alloy, J. of the Korean Society for Heat Treatment, Vol. 17, No. 4, (2004) pp. 230-235.
|
12 |
YOSHIAKI IIJMA, KAZUTOMO HOSHINO and KEN-ICHI HIRANO, Diffusion of Titanium in Copper, Metall. Trans. A8A (1977) 997-1001.
|
13 |
Ki-Weon Kang, Byung-Jei Lee, Kyung-Young Jang, Jung-Kyu Kim, Failure analysis and evaluation of strength properties on brazed joints, The Korean Society of Mechanical Engineers, 2005, 94-99 (6pages).
|
14 |
Chang-Suk Youn, Dong-geun Lee, Effects of Post Heat Treatment on the Mechanical Properties of Cold-Rolled Ti/Cu Clad Sheet, Metals 2020, 10, 1672; doi:10.3390/met10121672
DOI
|
15 |
Woo-Hyun Song, Dong-Han Seo and Jang-Yong Yoo, Development Trend of Linepipe Steel and It's Weldability, Journal of KWJS, Vol. 27, No. 1, February, 2009.
|