• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.3
• /
• pp.182-187
• /
• 2011

In this paper, PBTI characteristics of NMOSFETs with La incorporated HfSiON and HfON are compared in detail. The charge trapping model shows that threshold voltage shift (${\Delta}V_{\mathrm{T}}$) of NMOSFETs with HfLaON is greater than that of HfLaSiON. PBTI lifetime of HfLaSiON is also greater than that of HfLaON by about 2~3 orders of magnitude. Therefore, high charge trapping rate of HfLaON can be explained by higher trap density than HfLaSiON. The different de-trapping behavior under recovery stress can be explained by the stable energy for U-trap model, which is related to trap energy level at zero electric field in high-k dielectric. The trap energy level of two devices at zero electric field, which is extracted using Frenkel-poole emission model, is 1,658 eV for HfLaSiON and 1,730 eV for HfLaON, respectively. Moreover, the optical phonon energy of HfLaON extracted from the thermally activated gate current is greater than that of HfLaSiON.

• Korean Journal of Materials Research
• /
• v.14 no.8
• /
• pp.595-599
• /
• 2004

We investigated the structural, electrical and magnetic properties of Mn-doped $CuAlO_2$ delafossite ceramics ($CuAl_{1-x}Mn_{x}O_2,\;0\le\;x\;\le0.05$), synthesized by solid-state reaction method in an air atmosphere at a sintering temperature of $1150^{\circ}C$. The solubility limit of Mn ions in delafossite $CuAlO_2$ was found to be as low as about 3 $mol\%$. Positive Hall coefficient and the temperature dependence of conductivity established that non-doped $CuAlO_2$ ceramic is a variable-range hopping p-type semiconductor. It was found that the Mn-doping in $CuAlO_2$ rapidly reduced the hole concentration and conductivity, indicating compensation of free holes. The analysis of the magnetization data provided an evidence that antiferromagnetic superexchange interaction is the dominant mechanism of the exchange coupling between Mn ions in $CuAl_{1-x}Mn_{x}O$ alloy, leading to an almost paramagnetic behavior in this alloy.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.166-166
• /
• 2012

We examined the distribution of Co ions of ferromagnetic n-type Zn(1-x)Co(x)O semiconducting films with the Co concentrations of 0.03~0.07 using x-ray absorption fine structure (XAFS) measurements at the Co and Zn K edges. Extended XAFS (EXAFS) revealed that Co ions mainly occupied the zinc sites of the films. X-ray absorption near edge structure (XANES) spectra demonstrated that the pre-edge peak of the Co K edge was substantially affected by the second neighboring Co ions at the zinc sites due to hybridizing of the Co 4p conduction electrons with the Co 3d bounded electrons. From XANES and EXAFS analysis using ab initio calculations, we found that Co ions uniformly occupied the zinc sites of the Zn (0.93) Co (0.07)O film, whereas the Co ions of the Zn (0.97) Co (0.03)O and Zn (0.95) Co (0.05)O films were substituted at localized zinc sites. The ferromagnetic properties of the Zn (0.93) Co(0.07)O film could be induced by direct interaction between the magnetic dipoles of the Co ions with a mean distance of 4.3 A or by Co 4p electron mediation.

• Journal of Korean Society for Atmospheric Environment
• /
• v.20 no.1
• /
• pp.77-85
• /
• 2004

In this study, the concentrations of reduced S compounds (including hydrogen sulfide (H$_2$S); methyl mercaptan ($CH_3$SH); dimethyl sulfide (($CH_3$)$_2$S); carbon disulfide (CS$_2$); and dimethyl disulfide (($CH_3$)$_2$S$_2$) were determined from landfill gas (LFG) in three municipal landfill sites in the two cities of Gwang Ju (GJ) and Jeju (JJ), Korea. The S gas concentrations measured in these landfill sites were found to be dominated by H$_2$S with its mean concentration of 850 ppm from 10 LFG samples. Both absolute and relative dominance of H$_2$S was seen to be significant in most LFG samples, except those collected from very old and inactive landfills. Unlike the pattern of H$_2$S, other S gases were typically observed at much reduced concentration levels (a few ppm or less) as follows: DMS (3.5); $CH_3$SH (1.3); CS$_2$(1.2); and DMDS (0.02 ppm). If compared equally in mass concentration unit (mg m$^{-3}$ ), H$_2$S generally explained far above 90% of all S gas masses determined concurrently. Moreover, as its mass concentration commonly exceeds those of the major aromatic VOC components in LFG (like benzene and toluene), it appeared to be one of the most dominant gaseous components emitted as LFG in a quantitative sense.

• Journal of Broadcast Engineering
• /
• v.11 no.3 s.32
• /
• pp.276-283
• /
• 2006

This paper analyzes metadata workflow from creation to browsing, and discusses metadata authoring and browsing technology. Unlike usual multimedia authoring, broadcast metadata authoring means metadata editing synchronized with video. In order to make practical application of other systems, the result is in XML or MXF(Material eXchange Format) based on common metadata scheme. The MXF Browser developed with the consideration of broadcast metadata that is time-synchronized with AV content provides not only metadata authoring capability but also advanced content browsing services such as summary playback and highlight browsing based on metadata multi-track.

• Journal of Korean Society for Atmospheric Environment
• /
• v.27 no.2
• /
• pp.133-141
• /
• 2011

In this study, different calibration approaches for reduced sulfur compounds (RSCs) were investigated by using thermal desorption coupled with gas chromatography (GC) and pulsed flame photometric detection (PFPD). To evaluate the effects of calibration procedures, gaseous standards of 4 RSCs ($H_2S$, $CH_3SH$, DMS, and DMDS) prepared at 10 ppm level were analyzed at 7 loading injection volumes (40, 60, 80, 100, 160, 240, and 320 ${\mu}L$). The results were then compared with calibration curves made with the Z (zero offset) and N (non-zero offset) method. The concentrations of unknown samples were then quantified by using R (ratio) method in which the slope values are compared between standards and samples. Secondly, in A (average) method, results obtained from a multi-point analysis of unknown samples were also averaged to extract representative values for each sample. Results of both experiments showed that analytical error of low molecular weight components (such as $H_2S$ and $CH_3SH$) was greatly expanded with the Z method. In conclusion, the combined application of N-A method was the more realistic approach to reduce biases in the quantification of RSCs.

• International Journal of Quality Innovation
• /
• v.4 no.1
• /
• pp.131-147
• /
• 2003

This paper considers that a public department under specialized TQM manpower constraints have to implement multiple total quality management (TQM) policies to promote its service performance (fundamental goal) by adopting a centralized sequential advancement strategy (CSAS). Under CSAS, the decision-makers (DMs) start off by focusing specialized TQM manpower on a single policy, then transfer the specialized TQM manpower to the next policy when the first policy reaches the predetermined implementation time limit (in terms of education and training). Suppose that each TQM policy has a different desirous education and training goal. When the desirous goals for all TQM policies are achieved, we say that the fundamental goal will be satisfied. Within the limitation of total implementation period of time for all policies, assume the desirous goals for all TQM policies cannot be achieved completely. Under this premise, the optimal implementation sequence for all TQM policies must be calculated to maximize the weighted achievement of the desirous goal. We call this optimization problem a TQM case of "centralized sequential decision-making problem (CSDMP)". The achievement of the desirous goal for each TQM policy is usually affected by the experience in prior implemented policies, which makes solving CSDMP quite difficult. As a result, this paper introduces the concepts of sequential effectiveness and path effectiveness. The structural properties are then studied to propose theoretical methods for solving CSDMP. Finally, a numerical example is proposed to demonstrate CSDMP′s usability.

• Journal of the Korean Vacuum Society
• /
• v.16 no.3
• /
• pp.210-214
• /
• 2007

We have studied optical transitions of Gd-implanted GaN epilayers. Photoluminescence transition intensity at 590 nm at T=5 K diminishes and its center position moves to short avelength (blue shift) with increasing temperature up to 200 K. Above T=200 K, the transition intensity increases with increasing temperature while the center position remains the same. We believe that such anomalous optical transition behavior is due to the effect of rare-element in the semiconductor host material and lattice imperfection which was occurred during the implantation process well as.

• Textile Coloration and Finishing
• /
• v.17 no.3 s.82
• /
• pp.1-7
• /
• 2005

Cationic dyeable polyester(CDP) was produced through melt blending of cationic chips having $2mol\%$ of sodium salt of dimethyl ester of 5-sulfoisophthalic acid(DMS salt) and normal polyester chips in different proportions to obtain yarns having varying amount of comonomer in the fiber. The modified polyesters showed increased moisture regain, decreased viscosity, lower softening point and improved antistatic characteristics, according to the amount of modifier. In dyeing at $100^{\circ}C$ the dyeing rate of cationic dyes with CDP fiber increased slowly than that of disperse dyes. In dyeing at $120^{\circ}C$ cationic dyes reached to equilibrium at 30min and disperse dyes at 10min. Cationic dyes in dyeing of CDP fabric have a better wash fastness compared with disperse dyes, also rubbing fastness of cationic dyes is better than that of disperse dyes. The light fastness of CDP fabric for cationic and disperse dyes is not good. The fastness of 75d/36f CDP fabric is higher than 75d/72f fabric. Solvent wicking fastness of CDP with cationic dyes is better than that of disperse dyes.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.25 no.4
• /
• pp.81-95
• /
• 2000

A knowledge-based system with fuzzy production rules is a representation of static knowledge of an expert. On the other hand, a real system such as the stock market is dynamic in nature. Therefore we need a strategy to reflect the dynamic nature of real system when we make inferences with a knowledge-based system. This paper proposes a strategy of dynamic inferencing for a knowledge-based system with fuzzy production rules. The strategy suggested in this paper applies weights of attributes of conditions of a rule in the knowledge-base. A degree of match(DM) between actual input information and a condition of a rule is represented by a value [0,1]. Weights of relative importance of attributes in a rule are obtained by AHP(Analytic Hierarcy Process) method. Then these weights are applied as exponents for the DM, and the DMs in a rule are combined, with MIN operator, into a single DM for the rule. In this way, overall DM for a rule changes depending on the importance of attributes of the rule. As a result, the dynamic nature of a real system can be incorporated in an inference with fuzzy production rules.