• Convergence Security Journal
• /
• v.18 no.5_1
• /
• pp.121-126
• /
• 2018

The development of modern ICT and network technologies has made the business environment smart.and under such circumstances, a great deal of data is being generated, stored and used. The important information that becomes an energy source for corporate management creates economic profit and value and is also utilized as a basis for strong influence. Therefore, important information must ensure its availability and convenience while ensuring confidentiality and integrity, which is the basic objective of information protection. However, most companies are seeing more and more incidents of serious damage due to the leakage of important internal information. In this study, we deal with the Data Loss Prevention (DLP) technologies and solutions to prevent internal information leakage and establish stable data security and information protection management.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.264-265
• /
• 2003

프로젝션 디스플레이 장치에 있어서 광학적인 효과 면에서 반사형 Light Valve (DLP, LCoS 등)를 주로 사용하고 있는데 이는 제작 프로세스 상 투과형에 비해 고 가격이므로 3판식 방법 보다는 단판식 방법이 선호되고 있다. 그러나 그림 1 에서 보이는 바와 같이 단판식의 경우 구조적 시스템은 단순하지만 광의 사용 효율이 3판식 방법에 비해 1／3 수준으로 낮아지기 때문에 광의 사용효율을 높이기 위해 여러가지 방법이 시도되고 있는 실정이다. (중략)

• Proceedings of the Korean Information Science Society Conference
• /
• 2012.06c
• /
• pp.254-256
• /
• 2012

스마트폰의 보급이 증가하게 됨에 따라 많은 사람들이 이를 활용하고 있지만 스마트폰 활용에 따른 보안에 대한 인식은 낮다. 기업에서도 스마트폰을 활용한 업무가 증가함에 따라 각 기업의 내부 자료가 외부에 유출될 수 있는 보안 위협이 증가하고 있으며 이를 막기 위하여 Data Loss Prevention(DLP) 기술의 중요성이 커지고 있다. 본 논문에서는 안드로이드 플랫폼 기반의 DLP를 위한 기반 기술이 되는 데이터의 이동을 모니터링 하는 기술을 제안한다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1371-1374
• /
• 2009

According to depth cues of an image, the optical engine of the solid volumetric true 3D display can project a sequence of slices of a 2D image to corresponding display at a set of liquid shutters (LC) locating at different depth. A single DLP optical engine developed for a solid volumetric true 3D display consists of a lamp, reflector, color wheel, hollow integrator, relays, DMD, and projection lens. The simulation results show that the optical engine designed for single DLP volumetric true 3D display satisfies the requirements.

• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.3
• /
• pp.373-376
• /
• 2021

Tested the flexural strength and maximum load of two types of dental 3 D printed temporary tooth materials of the DLP method. The average flexural strength was 206.98 MPa in the test group and 139.77 MPa in the control group. The average flexural strength of the experimental group was 67.21 MPa higher than that of the control group. In the maximum load experiment, an average of 44.16N in the experimental group and 37.31N in the control group were measured. The average value of 6.85N was higher in the experimental group, and the durability of the artificial tooth restoration was improved.

• Proceedings of the Optical Society of Korea Conference
• /
• 2008.02a
• /
• pp.139-140
• /
• 2008

• The Journal of Korean Institute of Information Technology
• /
• v.15 no.12
• /
• pp.165-171
• /
• 2017

This paper proposes a method of support-generation using morphological image processing instead of geometric calculations. The geometric computational cost is dependent on the shape, but our method is independent on the shape. For obtaining the external support area for extrusion shape, we represents morphological operations between two sliced layer images and shows results of each operation stages. Internal support area is evaluated from erosion and opening operations with the sliced-layer image. In these support areas, the supporter image is generated using the designed support structures. Also, we made a DLP printer and the STL model included supporter-structure is printed by the DLP printer. We confirmed the necessity of support-generation method with the support structures individually dependent on materials by looking at the printed results.

• Journal of the Korean Society of Radiology
• /
• v.8 no.2
• /
• pp.75-79
• /
• 2014

The aim of this retrospective research was to investigate the influence of the patient's arm position on radiation dose and scanning during CT. Chest CT image created image degradation, artifact and overdose to the patient due to the difference of the chest thickness. Therefore, the patient's arm should up position during the CT chest examination. In 2012, 1,642 patients underwent chest CT examination in Seoul K hospital. 118 chest CT examination performed hands down position. The average DLP value of the CT chest arm up examination was 275 $mGy{\cdot}cm$. The average DLP value of the CT chest arm down examination was 312.46 $mGy{\cdot}cm$. In the retrospective study with same patient, The average DLP value of the CT chest examination arm up vigorously was 267.5 $mGy{\cdot}cm$. The average DLP value of the CT chest arm down examination was 307.5 $mGy{\cdot}cm$. Chest CT scan without raising arm created linear artifact due to the lack of X-ray photons which is the thickest part of the human body of shoulder area. In conclusion, arm positioning patients' arms above the shoulders at CT of the chest increases image quality and substantially reduces effective radiation dose.

• The Journal of the Korea Contents Association
• /
• v.15 no.6
• /
• pp.290-296
• /
• 2015

The purpose of this study was to derive the proposals and to suggest the exposure dose reduction scheme on pediatric head CT scan by analyzing and comparing CT dose index (CTDI) and the national diagnostic reference levels. From January 2014 to December, 231 children under 10years who were requested a pediatric head CT scan with head injury were examined. Research methods were to research and analyze the general characteristics kVp, mA test coverage $CTDI_{vol}$ and DLP referring to dose reports and electronic medical record (EMR). As a result, 7.4%(17 patients) of the total subjects in $CTDI_{vol}$ showed a national diagnostic reference levels exceeding. For DLP 41.6%(96 patients) in excess was relatively higher than $CTDI_{vol}$. DLP was exceeded more than about 60% that is higher than the CT dose index presented by Korea Food & Drug Administration. it is cause of high DLP that scan range increased more than about 30% wider than the standard test coverage presented in Health Insurance Review & Assessment Service. In conclusion, it is able to significantly lower the dose if it is complied with checking the baseline scan range of pediatric head CT scan and appropriately adjusting the protocol.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.29 no.2
• /
• pp.54-60
• /
• 2019

Recently, various composite materials for additive manufacturing are interested to expand the application field of 3D printing. 3D printing technique was mainly developed using polymer, and ceramic materials for 3D printing are still in the early stage of research due to the requirement of high solid content and post treatment process. In this study, silica particles with various diameters were surface treated with silane coupling agent, and synthesized as silica composite with photopolymer to apply DLP 3D printing process. DLP is an additive manufacturing technology, which has high accuracy and applicability of various composite materials. The rheological behavior of silica composite was analyzed with various solid contents. After DLP 3D printing was performed using silica composites, the printing accuracy of the 3D printed specimen was less than about 3 % to compare with digital data and he bending strength was 34.3 MPa at the solid content of 80 wt%.