• 제목/요약/키워드: DISTRIBUTION OF DIAMETER

검색결과 1,851건 처리시간 0.029초

원통형조사창에서의 절리선 길이분포를 이용한 암반 내 절리직경분포 추정에 관한 연구 (A Study for the Estimation of Joint Diameter Distribution Using the Trace Length Distribution from Cylindrical Window Survey)

  • 전기환;송재준;조영도
    • 터널과지하공간
    • /
    • 제21권5호
    • /
    • pp.386-393
    • /
    • 2011
  • 본 연구에서는 암반 내 원통형 공동면에 나타나는 절리선 길이분포를 이용하여 암반 내에 존재하는 절리의 직경분포를 추정하기 위한 알고리듬을 제안하였다. 암반 내 절리의 직경분포를 추정하기 위해서 송재준(2005)에 의해 제시된 Joint Center Volume(JCV)의 개념이 적용되었다. 평면 조사창에 나타나는 절리선에 대한 JCV 값을 산정하는 송재준(2005)의 알고리듬을 확장하여, 원통형 공동면을 조사창으로 하는 경우의 암반 내 절리 직경분포 추정을 위해 전수조사 기법을 적용한 JCV 계산 알고리듬을 개발하였다. 추정된 절리 직경분포는 Monte-Carlo 시뮬레이션 기법을 이용하여 절리직경 모분포와 비교 검증하였으며 추정된 절리 직경분포가 모분포와 20% 내외의 오차 범위에서 수렴하는 것을 확인하였다.

축류형 사이클론을 이용한 공기역학경과 광학직경 상관관계 분석에 관한 연구 (A Study on Correlation Analysis between Aerodynamic Diameter and Optical Diameter Using Axial Flow Cyclone)

  • 김은정;박경려;허지은;조철희;조윤행
    • 한국입자에어로졸학회지
    • /
    • 제19권4호
    • /
    • pp.155-164
    • /
    • 2023
  • APS (Aerodynamic Particle Sizer) and OPC (Optical Particle Counter) have been widely used to real-time measurement of indoor and outdoor aerosols. The APS measures the size distribution based on an aerodynamic diameter, while the OPC uses optical diameter to measure the size distribution of aerosols. Since obtaining a size distribution based on aerodynamic diameter is important to understand aerosol characteristics, lots of researcher had been developed experimental equations which can convert optical diameter into aerodynamic diameter. However, previous studies have conducted repeated experiments on particles having a single diameter. In this study, an experimental method of converting optical diameter into aerodynamic diameter through a single experiment was presented. The collection efficiencies of an axial cyclone were measured using APS and OPC at the same time, and the correlation equation between aerodynamic diameter and optical diameter was driven through a theoretical model. Using the proposed method, the size distribution of NaCl particles measured by OPC showed a high correlation with the size distribution obtained by APS (0.93 of R-squared value). In the tests conducted on ISO A1, A2, and A4 test particles, the converted OPC size distribution tended to be similar to the APS size distribution, and for each of test particles (ISO A1, A2, and A4), the R-squared values for the APS particle size distribution were 0.75, 0.86, and 0.89, respectively.

Prediction of Stand Structure Dynamics for Unthinned Slash Pine Plantations

  • Lee, Young-Jin;Cho, Hyun-Je;Hong, Sung-Cheon
    • The Korean Journal of Ecology
    • /
    • 제23권6호
    • /
    • pp.435-438
    • /
    • 2000
  • Diameter distributions describe forest stand structure information. Prediction equations for percentiles of diameter distribution and parameter recovery procedures for the Weibull distribution function based on four percentile equations were applied to develop prediction system of even-aged slash pine stand structure development in terms of the number of stems per diameter class changes. Four percentiles of the cumulative diameter distribution were predicted as a function of stand characteristics. The predicted diameter distributions were tested against the observed diameter distributions using the Kolmogorov-Smirnov two sample test at the ${\alpha}$=0.05 level. Statistically, no significant differences were detected based on the data from 236 evaluation data sets. This stand level diameter distribution prediction system will be useful in slash pine stand structure modeling and in updating forest inventories for the long-term forest management planning.

  • PDF

Weibull 분포(分布)를 응용(應用)한 임학연구(林學硏究)(II) - Gamma함수(函數)에 의한 parameter의 추정(推定) - (Studies on the Application of Weibull Distribution to Forestry (II) - Estimation of Parameter by Gamma Function -)

  • 윤종화
    • 한국산림과학회지
    • /
    • 제61권1호
    • /
    • pp.1-7
    • /
    • 1983
  • Weibull 분포함수(分布函數)에 의하여 임분(林分)의 직경(直徑) 분포(分布)를 추정(推定)할 수 있는 방법(方法) 중(中) 직경분포(直徑分布)의 실측치(實測値)로 직접(直接) 계산(計算)하는 방법(方法)에 대하여는 제(第) I 보(報)에서 발표(發表)하였다. 본(本) 연구(硏究)에서는 임의추출(任意抽出)한 표본목(標本木)의 평균직경(平均直徑)과 단면적평균직경(斷面績平均直徑)만을 구한 다음 Gamma함수(函數)를 사용(使用)한 Weibull 분포함수(分布函數)에 의하여 임분(林分)의 직경분포(直徑分布)를 추정(推定)하였다. 그 결과(結果) 실제(實際) 임분(林分)의 직경분포(直徑分布)와 매우 적합(適合)하였다. 그러므로 이 방법(方法)을 응용(應用)하면 임분(林分)의 직경분포(直徑分布)의 추정(推定)은 물론 장래(將來)의 임분구조(林分構造)의 해석(解析)과 예측(豫測)도 쉽게할 수 있다.

  • PDF

Weibull분포(分布)를 응용(應用)한 임학연구(林學硏究) (I) - 직경분포(直徑分布)의 추정(推定) - (Studies on the Application of Weibull Distribution in Forestry (I) - Estimation of Diameter Distribution -)

  • 윤종화
    • 한국산림과학회지
    • /
    • 제59권1호
    • /
    • pp.46-50
    • /
    • 1983
  • Weibull 분포(分布)에 의(依)하여 임분(林分)의 직경분포(直徑分布)를 추정(推定)하여 그 적합성(適合性)을 Kolomogorov-Smirnov법(法)에 의하여 검정(檢定)한 결과(結果) 매우 잘 적합(適合)함을 나타내었다.

  • PDF

전자유압식 분사계에 의한 초고압 디젤분무의 입경분포에 관한 연구 (A Study on the Droplet Size Distribution of Ultra High Pressure Diesel Spray on Electronic Hydraulic Fuel Injection System)

  • 장세호;안수길
    • 동력기계공학회지
    • /
    • 제2권1호
    • /
    • pp.25-30
    • /
    • 1998
  • In order to investigate the droplet size distribution and Sauter Mean Diameter in a ultra high pressure diesel spray, fuel was injected with ultra high pressure into the environments of high pressure and room temperature by an Electronic Hydraulic Fuel Injection System. Droplet size was measured with the immersion liquid sampling technique. The immersion liquid was used a mixture of water-methycellulose solution and ethanol. The Sauter Mean Diameter decreased with increasing injection pressure, with a decrease environmental pressure (back pressure) and nozzle diameter. Increasing the injection pressure makes the fuel density distribution of the spray more homogeneous. An empirical correlation was developed among injection pressure, air density, nozzle diameter and the Sauter Mean Diameter of spray droplets.

  • PDF

최소자승법을 이용한 원판형 절리의 직경분포와 체적빈도 추정에 관한 연구 (A Study on the Estimation of Diameter Distribution and Volumetric Frequency of Joint Discs Using the Least Square Method)

  • 송재준
    • 터널과지하공간
    • /
    • 제15권2호
    • /
    • pp.137-144
    • /
    • 2005
  • 이 연구에서는 최소자승법을 이용하여 절리의 직경분포를 추정하는 방법을 개발하였다. 이전에 Song and Lee가 제안한 방법에서는 현장에서 조사한 양끝내포선(contained trace) 분포로부터 무한 조사창에서 정의되는 절리선(joint trace) 길이 분포를 먼저 구하고 이 후에 직경분포를 구하게 된다. 그러나 새로 제안한 방법을 사용하면 중간 추정과정없이 현장에서 얻은 양끝내포선 분포로부터 바로 절리의 직경분포를 구할 수 있다. 이전의 방법과 비교할 때 새로 제안된 방법은 표본의 크기가 작을 때 조금 더 높은 추정정밀도를 보이며, 직경분포를 추정하는 과정에서 절리의 기하학적 파라미터의 하나인 체적빈도(volumetric frequency)도 제공한다. 새로운 추정법의 검증을 위해 Monte Carlo 시뮬레이션을 적용하였다.

테다소나무 조림지(造林地)에 대한 Weibull 직경분포(直經分布) 수확예측(收穫豫測) 시스템에 관(關)한 연구(硏究) (Weibull Diameter Distribution Yield Prediction System for Loblolly Pine Plantations)

  • 이영진;홍성천
    • 한국산림과학회지
    • /
    • 제90권2호
    • /
    • pp.176-183
    • /
    • 2001
  • 본(本) 연구(硏究)에서는 목재(木材)의 다목적(多目的) 생산량(生産量)(multiple-product yield) 예측(豫測)에 대한 해결책(解決策)으로서 테다소나무(Pinus taeda L.) 조림지(造林地)를 대상으로 하여 Weibull 직경분포(直徑分布) 수확예측(收穫豫測) 시스템을 개발(開發)하였다. 직경분포(直徑分布) 수확예측(收穫豫測) 모형(模型)을 개발(開發)하기 위하여, 4개의 백분위수(百分位數) 식(式)들을 근거(根據)로 한 모수(母數) 회복(回復)(parameter recovery) 절차법(節次法)을 적용(適用)하였다. 또한 직경급(直徑級)에 대한 수확량(收穫量) 계산(計算)을 위하여 단목(單木) 수고(樹高) 예측식(豫測式)을 개발(開發)하였으며, 그리고 단목(單木) 재적(材積) 예측식(豫測式)을 이용(利用)함으로써 직경급(直徑級)에 대해 기대되는 재적량(材積量)을 계산(計算)할 수가 있다. 본(本) 연구(硏究)에서 사용(使用)된 직경급(直徑級)에 대한 Weibull 누적함수(累積函數)의 상한선(上限線) 차이(差異) 방법(方法)이 기존(旣存)의 상한선(上限線)과 하한선(下限線)의 절차법(節次法)보다도 괄약오차(括約誤差)를 줄 일수 있는 보다 나은 절차법(節次法)이였다. 본(本) 연구(硏究)에서 제시(提示)된 Weibull 직경분포(直徑分布) 수적예측(收積豫測) 시스템에 대한 타당성(妥當性) 검정(檢定)의 한 방법(方法)으로서 Kolmogorov-Smirnov test 결과(結果), 각(各) plot당 예측(豫測)된 직경분포(直徑分布)와 관측(觀測)된 직경(直徑) 분포급(分布級) 사이에서 통계적(統計的) 유의성(有意性)이 없는 것으로 나타났다. 이와 같은 직경분포(直徑分布) 수확예측(收穫豫測) 시스템은 다목적(多目的) 목재(木材) 생산량(生産量) 예측(豫測)과 임분(林分) 구조(構造) 모형(模型) 및 임분(林分)의 경영(經營)에 유용(有用)한 정보(情報)를 제공(提供)할 것이다.

  • PDF

Simulation study on porosity disturbance of ultra-large-diameter jet borehole excavation based on water jet coal wetting and softening model

  • Guo, Yan L.;Liu, Hai B.;Chen, Jian;Guo, Li W.;Li, Hao M.
    • Geomechanics and Engineering
    • /
    • 제30권2호
    • /
    • pp.153-167
    • /
    • 2022
  • This study proposes a method to analyze the distribution of coal porosity disturbances after the excavation of ultra-large-diameter water jet boreholes using a coal wetting and softening model. The high-pressure jet is regarded as a short-term high-pressure water injection process. The water injection range is the coal softening range. The time when the reference point of the borehole wall is shocked by the high-pressure water column is equivalent to the time of high-pressure water injection of the coal wall. The influence of roadway excavation with support and borehole diameter on the ultra-large-diameter jet drilling excavation is also studied. The coal core around the borehole is used to measure the gas permeability for determining the porosity disturbance distribution of the coal in the sampling plane to verify the correctness of the simulation results. Results show that the excavation borehole is beneficial to the expansion of the roadway excavation disturbance, and the expansion distance of the roadway excavation disturbance has a quadratic relationship with the borehole diameter. Wetting and softening of the coal around the borehole wall will promote the uniform distribution of the overall porosity disturbance and reduce the amplitude of disturbance fluctuations.

다단계 반복기법을 이용한 관로시스템의 최적관경 결정 (determination of Optimum Pipe diameter Using Multi-Stage Iterative Method in Water Distribution system)

  • 한건연;박재홍
    • 한국수자원학회논문집
    • /
    • 제31권3호
    • /
    • pp.327-335
    • /
    • 1998
  • 상수관망은 상수공급시스템에서 핵심적인 부분이다. 주어진 상수공급시스템에서 배수관망에 대한 비용은 사업전체 비용에 대한 대부분을 차지하고 있다. 관망에 대한 설계과정 중에서 최적화기법을 사용하여 비용을 절감하기 위한 연구가 시도되었다. 주어진 상수관망 시스템의 설계시 고려되는 관경의 결정을 위해 유량해석과 최적화 기법이 연계되어 해석하는 반복기법이 적용되었다. 유량해석을 위해서 선형화기법이 되입되었고 관경의 최적화를 위해서 선형계획법에 기초한 개정 단체법을 이용하였다. 22개 관로와 35개 관로를 가진 실제관망에 본 모형을 적용한 결과 짧은 계산시간으로 최적화된 상용관을 결정할 수 있었다.

  • PDF