• 한국산업융합학회 논문집
• /
• 제20권4호
• /
• pp.275-284
• /
• 2017

As the high-level of the industrial and information age, the electricity become the indispensable element in the daily life including OA, FA, and computer, electric home appliances, and etc. In particular, The continuous use of the high capacity power supply system by applying a Switching Mode Power Supply(SMPS) according to the increase of the secondary side output terminal of the power load of the refrigerator of the home appliance or automation of the plant is pressed. The purpose using the way with this kind of high-capacity altogether is to supply the output voltage and output current regardless of the input voltage or to the external environmental conditions of the secondary-side load fluctuation. In this paper, a combination of a Buck Converter with Boost Converter by making a constant current source to control the inductor current and maintain stable power supply side operating characteristics, when load variations. While maintaining the same characteristics as conventional Buck Converter, and offer a DC-DC Converter system with the new switch pattern having a wide output range capable of operating in Buck-Boost Converter. In addition, after theoretical analysis, we carry out simulations and experiments to verify the validity and performance comparing with a conventional DC-to-DC converter.

• 전기전자학회논문지
• /
• 제24권1호
• /
• pp.319-325
• /
• 2020

본 논문에서 모바일 기기에 적용하는 DCM DC-DC 벅 변환기를 설계하였다. 이 변환기는 안정된 동작을 위한 보상기, PWM 로직과 파워 스위치로 구성되어 있다. 작은 하드웨어 폼-팩터를 얻기 위하여 칩 외부에서 사용하는 소자의 갯수를 최소화하여야 하며 이는 효율적인 주파수 보상과 디지털 스타트-업 회로로 구현하였다. 매우 작은 부하 전류에서 효율의 감소를 막기 위하여 버스트-모드 동작도 구현하였다. DCM 벅 변환기는 0.18um BCDMOS 공정으로 제작되었다. 2.8~5V의 입력 전압 범위에 대하여 출력 전압 값은 외부 저항 소자를 사용하여 1.8V로 프로그램 되었다. 1MHz의 스위칭 주파수 및 100mA의 부하 전류에서 측정된 최대 효율은 92.6%이다.

• 전자공학회논문지SC
• /
• 제37권1호
• /
• pp.56-63
• /
• 2000

Buck 컨버터는 간단한 회로구조와 뛰어난 안정성으로 인하여 DC-DC 컨버터 중에서 가장 많이 이용되는 Topology이다. 그러나 박막 인버터를 기존의 buck 컨버터에 이용하는 경우 박막 인덕터의 인덕턴스가 기본적으로 작은 값이 되므로 최적의 리플전압을 얻기 위해서는 필요이상으로 주파수를 높일 필요가 있으며 이 경우 스위칭손실에 의한 컨버터의 효율저하를 초래하게 된다. 본 논문에서는 이러한 문제점을 해결하기 위하여 박막 인버터의 낮은 인덕턴스 값을 이용하여 스위치에 있어서 영전압 스위칭동작을 구현함으로써 컨버터의 효율을 상승시킬 수 있는 1W급 ZVS-CV Buck 컨버터를 제안하였으며, 실험과 손실해석을 통하여 박막 인덕터를 이용한 ZVS-CV Buck 컨버터의 정상동작을 확인하였고 기존의 Buck 컨버터 보다 효율이 약 4% 향상됨을 입증하였다.

• Journal of Power Electronics
• /
• 제10권5호
• /
• pp.477-484
• /
• 2010

A pulse width modulation-voltage source inverter (PWM-VSI) is used for variable speed permanent magnet synchronous motor (PMSM) drives. The PWM-VSI fed PMSM has two major disadvantages. Firstly, the PWM-VSI DC-link voltage limits the magnitude of the PMSM terminal voltage. As a result, the motor speed is restricted. Secondly, in a low speed range, the PWM-VSI modulation index declines. This is caused by a high DC-link voltage and a low terminal voltage ratio. As a result, the distortion of the voltage command and the stator current are increased. This paper proposes an optimal pulse amplitude modulation (PAM) control which can adjust the inverter DC-link voltage by using a buck-boost DC-DC converter. At a low speed range, the proposed system can reduce the distortion of the voltage command, which improves the stator current waveform. Also, the allowable speed range is extended. In order to verify the proposed method, experimental results are provided to confirm the simulation results.

• 전자공학회논문지SC
• /
• 제43권5호
• /
• pp.28-35
• /
• 2006

본 논문은 회로 구성 블록으로 CMOS 연산 트랜스컨덕턴스 증폭기(OTA)를 사용한 새로운 3.3-1 V 동기식 buck DC/DC 컨버터를 제안한다. PWM 회로의 오차 증폭기 OTA는 온도 안정성 향상을 위해 보상되었다. 보상된 OTA 트랜스컨덕턴스 이득의 온도 계수는 $0-100^{\circ}C$ 범위에서 $150\;ppm/^{\circ}C$ 이하이다. $0.35{\mu}m$ 표준 CMOS 공정으로 HSPICE 시뮬레이션을 수행한 결과는 40-125 mA의 부하 전류 범위에서 제안된 컨버터의 효율이 80% 이상임을 보여준다. 이러한 결과는 제안된 컨버터가 전지로 동작되는 시스템에 이용하기에 적당함을 보여준다.

• IEIE Transactions on Smart Processing and Computing
• /
• 제3권6호
• /
• pp.425-429
• /
• 2014

This paper proposes a DC-DC Buck-Converter with DT-CMOS (Dynamic Threshold-voltage MOSFET) Switch. The proposed circuit was evaluated and compared with a CMOS switch by both the circuit and device simulations. The DT-CMOS switch reduced the output ripple and the conduction loss through a low on-resistance. Overall, the proposed circuit showed excellent performance efficiency compared to the converter with conventional CMOS switch. The proposed circuit has switching frequency of 1.2MHz, 3.3V input voltage, 2.5V output voltage, and maximum current of 100mA. In addition, this paper proposes a SCP (Short Circuit Protection) circuit to ensure reliability.

• 전자공학회논문지
• /
• 제50권7호
• /
• pp.281-285
• /
• 2013

벅 컨버터 LC 필터의 라플라스 변환 회로에서 전압 분배 법칙을 사용하여 전달 함수를 구하였다. 참고문헌에서 제안된 Type2 제어기의 근 궤적과 시뮬레이션 파형으로부터 제어기 설계가 잘못된 것을 나타내었다. PI 제어기를 근 궤적 기법으로 설계하였다. PI 제어기를 연산 증폭기를 사용하여 구현하였다. 제대로 동작하는 Type2 제어기를 제안하고 시뮬레이션을 통해 결과를 확인하였다.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제55권4호
• /
• pp.224-230
• /
• 2006

The conventional way to implement a bidirectional converter with boost/buck has been to use two general purpose PWM ICs with a single supply voltage. In this case, when one direction mode is in operation, the other is disabled and the output of the error amplifier of the disabled IC may be saturated to a maximum value or zero. Therefore, during mode transition, a circuit which can disable the switching operation for a certain time interval is required making it impossible to get a seamless transition. In this paper, the limitations of the conventional 42V/14V bi-directional DC/DC converter implemented with general current mode PWM ICs with a single supply voltage are reviewed and a new current mode PWM controller circuit with a dual voltage system is proposed. The validity of the proposed circuit is investigated through simulation. and experiments.

• 전력전자학회논문지
• /
• 제22권4호
• /
• pp.360-368
• /
• 2017

This paper proposes the 80-kW high-efficiency bidirectional hybrid SiC boost/buck converter using droop control for DC nano-grid. The proposed converter consists of four 20-kW modules to achieve fault tolerance, ease of thermal management, and reduced component stress. Each module is constructed as a cascaded structure of the two basic bi-directional converters, namely, interleaved boost and buck converters. A six-pack hybrid SiC intelligent power module (IPM) suitable for the proposed cascaded structure is adopted for high-efficiency and compactness. The proposed converter with hybrid switching method reduces the switching loss by minimizing switching of insulated gate bipolar transistor (IGBT). Each module control achieves smooth transfer from buck to boost operation and vice versa, since current controller switchover is not necessary. Furthermore, the proposed parallel control using DC droop with secondary control, enhances the current sharing accuracy while well regulating the DC bus voltage. A 20-kW prototype of the proposed converter has been developed and verified with experiments and indicates a 99.3% maximum efficiency and 98.8% rated efficiency.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.256-260
• /
• 2001

This paper presents boost and buck and buck-boost DC-DC converter circuit topologies of high-frequency soft switching transition PWM chopper type DC-DC high power converters with a single auxiliary passive resonant snubber. In the proposed boost power converter circuits operating under a principle of ZCS turn-on and ZVS turn-off commutation schemes, the capacitor and inductor in the auxiliary passive resonant circuit works as the loss less resonant snubber. In addition to this, the switching voltage and current peak stresses as well as EMI and RFI noises can be basically reduced by this single passive resonant snubber. Moreover, it is proved that converter circuit topologies with a passive resonant snubber are capable of solving some problems of the conventional hard switching PWM processing based on high-ferquency pulse modulation operation principle. The simulation results of this converter are discussed as compared with the experimental ones. The effectiveness of this power converter with a single passive resonant snubber is verified by the 5kW experimental breadboad set up.