Soft-Switching Boost Chopper Type DC-DC Power Converter with a Single Auxiliary Passive Resonant Snubber

  • Nakamura Mantaro (Division of Electrical Systems Engineering, The Graduate School of Science and Engineering, Yamaguchi University) ;
  • Myoui Takeshi (Division of Electrical Systems Engineering, The Graduate School of Science and Engineering, Yamaguchi University) ;
  • Abudullh Al Mamun (Division of Electrical Systems Engineering, The Graduate School of Science and Engineering, Yamaguchi University) ;
  • Nakaoka Mutsuo (Division of Electrical Systems Engineering, The Graduate School of Science and Engineering, Yamaguchi University)
  • Published : 2001.10.01

Abstract

This paper presents boost and buck and buck-boost DC-DC converter circuit topologies of high-frequency soft switching transition PWM chopper type DC-DC high power converters with a single auxiliary passive resonant snubber. In the proposed boost power converter circuits operating under a principle of ZCS turn-on and ZVS turn-off commutation schemes, the capacitor and inductor in the auxiliary passive resonant circuit works as the loss less resonant snubber. In addition to this, the switching voltage and current peak stresses as well as EMI and RFI noises can be basically reduced by this single passive resonant snubber. Moreover, it is proved that converter circuit topologies with a passive resonant snubber are capable of solving some problems of the conventional hard switching PWM processing based on high-ferquency pulse modulation operation principle. The simulation results of this converter are discussed as compared with the experimental ones. The effectiveness of this power converter with a single passive resonant snubber is verified by the 5kW experimental breadboad set up.

Keywords