• Particle and aerosol research
• /
• v.8 no.2
• /
• pp.89-95
• /
• 2012

Spherical mesoporous silica particles, of which main pore diameter was 3.8 nm, were successfully prepared by spray pyrolysis from aqueous silicic acid. The effect of precursor concentration, reaction temperature, and the addition of urea and PEG on the particle diameter and pore properties such as pore diameter, total pore volume, and specific surface area were investigated by using FE-SEM, particle size analyzer, and nitrogen absorption-desorption analysis. With an increase of the precursor concentration from 0.2 M to 0.7 M, the average particle diameter, total pore volume, and specific surface area of the porous silica particles increased from 0.56 to $0.96\;{\mu}m$, 0.434 to $0.486\;cm^3/g$, 467.8 to $610.4\;m^2/g$, respectively. Within the temperature range $(600\;^{\circ}C{\sim}800\;^{\circ}C)$, there was no significant difference in the pore diameter, total pore volume, and specific surface area. In addition, the addition of urea as an expansion aid led to slight increases in particle diameter, pore diameter, and specific surface area. However, when the polyethylene glycol (PEG) as an organic template was used, the total pore volume of porous particles increased dramatically.

• Clean Technology
• /
• v.21 no.4
• /
• pp.235-240
• /
• 2015

In this study, vanadium dioxide was doped with titanium (0~0.5 at %) to improve thermochromic properties. The titanium doped vanadium dioxide (Ti-VO₂) particles were prepared via thermolysis process using vanadyl sulfate, ammonium bicarbonate and titianium chloride as precursors. The crystal structure, morphology, chemical bonding and thermochromic properties were investigated by using XRD, FE-SEM, XPS, DSC and UV-Vis-NIR spectroscopy. It was found that titanium was successfully doped into the crystal lattice of VO₂ and the obtained Ti-VO₂ particles have monoclinic structure. With increasing Ti concentration, the particle size and phase transition temperature of Ti-VO₂ particles decreased and NIR switching efficiency increased.

• Resources Recycling
• /
• v.16 no.5
• /
• pp.41-45
• /
• 2007

Tetramethylorthosilicate (TMOS) and silica nanopowder were synthesized from the waste silicon sludge containing 15% weight of silicon powder. TMOS, a precursor of silica nanopowder, was firstly prepared from the waste silicon sludge by catalytic chemical reaction. The maximum recovery of the TMOS was 100% after 5 hrs regardless of reaction temperature above $130^{\circ}C$. But the initial reaction rate became faster while the reaction temperature was higher than $150^{\circ}C$. As the methanol feedrate Increased from 0.8 ml/min to 1.4 ml/min, the yield of reaction was not varied after 3 hrs. Then, silica nanopowder was synthesized from the synthesized TMOS by flame spray pyrolysis. The morphology of as-prepared silica nanopowder was spherical and non-aggregated. The average particle diameters ranged from 9 nm to 30 nm and were in proportional to the precursor feed rate, and precursor concentration.

• Journal of Adhesion and Interface
• /
• v.13 no.2
• /
• pp.64-72
• /
• 2012

Vinyl acetate/alkyl acrylate copolymers were prepared by water-born emulsion copolymerization according to the compositional change of vinyl acetate and various alkyl acrylates such as methyl acrylate (MA), ethyl acrylate (EA), and n-butyl acrylate (BA). Ammonium persulfate (APS) was used as an initiator and poly(vinyl alcohol) (PVA) was used as a protective colloid. The significant result was described as follows. The activation energy determined by an isothermal analysis in the temperature region between $100{\sim}200^{\circ}C$ of the copolymer had the order of PVAc/PMA > PVAc/PEA > PVAc/PBA. The peel strengths before and after the plasma treatment were the order of PVAc/PMA > PVAc/PEA > PVAc/PBA.

• Journal of KIISE:Computer Systems and Theory
• /
• v.36 no.4
• /
• pp.247-258
• /
• 2009

Distributed file systems running on a cluster of inexpensive commodity hardware are being recognized as an effective solution to support the explosive growth of storage demand in large-scale Internet service companies. This paper presents the design and implementation of BeanFS, a distributed file system for large-scale e-mail services. BeanFS is adapted to e-mail services as follows. First, the volume-based replication scheme alleviates the metadata management overhead of the central metadata server in dealing with a very large number of small files. Second, BeanFS employs a light-weighted consistency maintenance protocol tailored to simple access patterns of e-mail message. Third, transient and permanent failures are treated separately and recovering from transient failures is done quickly and has less overhead.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.2
• /
• pp.309-314
• /
• 2008

Analog-to-digital converters(ADCs) used in instrumentation and measurements often require high absolute accuracy, including excellent linearity and negligible dc offset. Incremental(integrating) data converters(IDCs) provide a solution for such measurement applications, as they retain most of the advantages of conventional $\Delta{\Sigma}$ converters, and yet they are capable of offset-free and accurate conversion. In this paper, a design technique for implementing multiplexed incremental data converters to convert narrow bandwidth AC signals over multi-channel is discussed. It incorporates the operation principle, topology, and digital decimation filter design. The theoretical results are verified by simulation results.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.326-326
• /
• 2017

개수로에서 비에너지(specific energy)는 수로바닥을 기준으로 단위무게의 물이 가지는 에너지로 정의되며 흐름의 위치수두와 속도수두의 합으로 표현된다. 비에너지는 수로단면의 변화에 따른 수심의 변화를 해석하기 위하여 사용되는 중요한 개념이다. 사각형 개수로에서의 비에너지 관계식은 3차방정식의 형태이며, 해석적으로 3개의 해(3개의 수심)를 가지나, 물리적인 의미를 가지는 해는 2개이며 나머지 하나의 해는 음수이므로 물리적인 의미를 가지지 않는다. 물리적인 의미를 가지는 2개의 해는 각각 흐름이 상류(subcritical flow)인 경우와 사류(supercritical flow)인 경우에 대한 수심이다. 즉, 일정한 유량이 흐르는 조건에서 동일한 비에너지를 가지는 수심이 상류와 사류에 각각 존재하는데, 이 2개의 수심을 대응수심(alternate depths)이라 정의한다. 이러한 사각형 개수로에 대한 비에너지 관계식은 3차방정식이므로 그 해석해를 구할 수 있어, 수로단면의 변화에 따른 흐름의 변화를 비교적 쉽게 해석할 수 있다. 사각형 개수로가 아닌 경우의 비에너지 관계식을 이론적으로 고찰하는 연구는 찾아보기 힘들다. 이에 본 연구에서는 포물선형 개수로에 대해서 비에너지 관계식을 유도하였다. 유도된 비에너지 관계식은 비선형 음함수의 형태로 해석적으로 해를 구할 수 없다. 유도된 관계식의 해법으로 2차의 정밀도를 가지는 Newton-Raphson방법을 이용하였으며, 계산의 초기치는 상용화된 Excel에서 쉽게 구할 수 있는 회귀식을 이용하여 구하였다. 적용 예를 통해, 단순 회귀식을 이용하는 경우에는 정해와의 상대오차가 2 - 8% 내외였는데, 본 연구에서 제안하는 방법을 사용하는 경우에는 동일한 조건에서 상대오차가 0.25% 내외를 보였다. 즉 본 연구에서 제시하고 있는 양해법을 이용하면, 포물선형 개수로 흐름의 대응수심을 용이하게 그리고 정확도가 매우 높게 산정할 수 있다.

• Journal of the Society of Naval Architects of Korea
• /
• v.38 no.3
• /
• pp.62-73
• /
• 2001

The interest in evaluation of structural intensity arises for practical reasons, because net energy flow distribution offers information of energy transmission path, positions of sources, and sinks of vibration energy. In this paper, structural intensity analysis of local ship structures using finite element method(FEM) is carried out. The purpose of this analysis is to evaluate the relative accuracy according to mesh fineness. The structural intensity of unstiffened and stiffened plates varying their mesh fineness is analyzed and the results are compared with those obtained by the assumed mode method. As results, the proper mesh size in qualitative/quantitative structural intensity analysis of plate structures is proposed. In addition, the propagation phenomenon of vibration energy is investigated for the thickness-varying flat plate, L-type plate, and box-girder structures.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.12
• /
• pp.127-137
• /
• 2009

A practical algorithm of generating most probable states in decreasing order of probability of the network system state is suggested for approximating the performance of multi-mode network system using algebraic structure of the system states. Most complex system having network structure with multi-mode unit state is difficult to evaluate the performance or reliability due to exponentially increasing size of state space. Hence not an exact computing method but an approximated one is reasonable approach to solve the problem. To achieve the goal we should enumerate the network system states in order as a pre-processing step. In this paper, we suggest an improved algorithm of generating most probable multi-mode states to get the ordered system states efficiently. The method is compared with the previous algorithms in respective to memory requirement and empirical computing time. From the experiment proposed method has some advantages with regard to the criterion of algorithm performance. We investigate the advantages and disadvantage by illustrating experiment examples.

• Journal of Korean Society of Transportation
• /
• v.20 no.3
• /
• pp.129-147
• /
• 2002

This paper presents a variational equality formulation by Providing new dynamic route choice condition for a link-based dynamic traffic assignment model. The concepts of used paths, used links, used departure times are employed to derive a new link-based dynamic route choice condition. The route choice condition is formulated as a time-dependent variational equality problem and necessity and sufficiency conditions are provided to prove equivalence of the variational equality model. A solution algorithm is proposed based on physical network approach and diagonalization technique. An asymmetric network computational study shows that ideal dynamic-user optimal route condition is satisfied when the length of each time interval is shortened. The I-394 corridor study shows that more than 93% of computational speed improved compared to conventional variational inequality approach, and furthermore as the larger network size, the more computational performance can be expected. This paper concludes that the variational equality could be a promising approach for real-time application of a dynamic traffic assignment model based on fast computational performance.