• Title/Summary/Keyword: D.I.Y.

Search Result 11,778, Processing Time 0.053 seconds

Strain Improvement through Protoplast Formation and Mutation of Inonotus obliquus Mycelia for Enhanced Production of Innerpolysaccharides (IPS) in Suspended Mycelial Cultures (Inonotus obliquus 의 균사체 액상배양에서 원형질체 형성과 돌연변이를 통한 단백다당체 고생산성 균주 개발)

  • Hong, Hyeong-Pyo;Jeong, Yong-Seob;Chun, Gie-Taek
    • KSBB Journal
    • /
    • v.25 no.2
    • /
    • pp.155-166
    • /
    • 2010
  • Studies on the production of cell-wall bound innerpolysaccharides (IPS) (soluble ${\beta}$-D-glucan) have been performed by use of suspended myelial cultures of Inonotus obliquus. This product has promising potentials as an effective antidiabetic as well as an immunostimulating agents. As a first step to enhanced production of IPS, Intensive strain improvement programs were carried out by obtaining a large amounts of protoplasts for the isolation of single cell colonies. Rapid and large screening of high-yielding producers was possible because about fivefold higher amount of protoplasts ($2.3{\times}10^6$ protoplasts/mL) could be recovered with relatively high regeneration rates of $10^{-2}{\sim}10^{-3}$ by applying a modified filtration method, as compared to the previously used trapping method. A basic protocol necessary for UV-mutation of the protoplasts was also developed, resulting in several overproducing variants with good fermentation properties. Since the amount of IPS extracted from the mycelial cell walls of I. obliquus turned out to be almost constant per g DCW, increase in cell mass was considered the most important factor for the enhancement in IPS production. Therefore, attempts were made to screen mutant cells showing rapid mycelial growth rate in the final suspended cultures. Notably, the mutant strains showing an active cellgrowth in the preceding solid growth cultures were observed to produce higher amount of IPS in the suspended fermentations as well. A striking mutant, OBLQ756-15-5 strain, obtained from the survivors of a harsh UV-treated condition (97% death rate) was found to stably produce as high cell mass as 22 g DCW/L in the final fermentations. Currently, this strain is being tested for development of a scaled-up fermentation process for mass production of IPS.

A Framework on 3D Object-Based Construction Information Management System for Work Productivity Analysis for Reinforced Concrete Work (철근콘크리트 공사의 작업 생산성 분석을 위한 3차원 객체 활용 정보관리 시스템 구축방안)

  • Kim, Jun;Cha, Heesung
    • Korean Journal of Construction Engineering and Management
    • /
    • v.19 no.2
    • /
    • pp.15-24
    • /
    • 2018
  • Despite the recognition of the need for productivity information and its importance, the feedback of productivity information is not well-established in the construction industry. Effective use of productivity information is required to improve the reliability of construction planning. However, in many cases, on-site productivity information is hardly management effectively, but rather it relies on the experience and/or intuition of project participants. Based on the literature review and expert interviews, the authors recognized that one of the possible solutions is to develop a systematic approach in dealing with productivity information of the construction job-sites. It is required that the new system should not be burdensome to users, purpose-oriented information management, easy-to follow information structure, real-time information feedback, and productivity-related factor recognition. Based on the preliminary investigations, this study proposed a framework for a novel system that facilitate the effective management of construction productivity information. This system has utilized Sketchup software which has good user accessibility by minimizing additional data input and related workload. The proposed system has been designed to input, process, and output the pertinent information through a four-stage process: preparation, input, processing, and output. The inputted construction information is classified into Task Breakdown Structure (TBS) and Material Breakdown Structure (MBS), which are constructed by referring to the contents of the standard specification of building construction, and converted into productivity information. In addition, the converted information is also graphically visualized on the screen, allowing the users to use the productivity information from the job-site. The productivity information management system proposed in this study has been pilot-tested in terms of practical applicability and information availability in the real construction project. Very positive results have been obtained from the usability and the applicability of the system and benefits are expected from the validity test of the system. If the proposed system is used in the planning stage in the construction, the productivity information and the continuous information is accumulated, the expected effectiveness of this study would be conceivably further enhanced.

Effects of Restricted Feeding during Growing Period on Laying Performance and Egg Quality in Layers (산란계의 육성기 제한 급여가 생산성 및 계란 품질에 미치는 영향)

  • Kang, H.K.;Cho, J.H.;Kim, J.H.;Kang, H.G.;Yu, D.J.;Na, J.C.;Kim, D.W.;Lee, S.J.;Kim, I.S.;Kim, S.H.
    • Korean Journal of Poultry Science
    • /
    • v.35 no.1
    • /
    • pp.63-69
    • /
    • 2008
  • The objective of this study was to investigate the effect of restricted feeding to laying performance and egg quality in brown layers. A total of 1,080 brown layer chicks were divided into three treatments; conventional feeding (ad libitum) and two restricted feedings (80% of conventional diet) for 70 weeks. One of restricted feeding started from six to eighteen weeks of age, and the other started from twelve to eighteen weeks of age. Diets were formulated by NRC (1994) recommendation. Overall laying performance and feed intake were the highest in $6{\sim}18 wk$ restricted group. But there was no significant difference among treatment group (P>0.05). Feed intake was higher in $6{\sim}18 wk$ restricted group during maximum production (P<0.05), but there was no difference between treatments after the peak. Egg quality tended to decreased by aging, but there was no significant difference among the treatments (P>0.05). The result of present study indicated that restricted feeding in rearing period of layers is beneficial to improve egg productivity and to reduce feed cost.

Effect of Feeding Herb Extract on Growth Performance, Intestinal Microflora and Blood Component Profile in Broiler Chickens (한약재 추출물의 급여가 육계의 생산성, 장내 미생물 및 혈액 성상에 미치는 영향)

  • Park, S.B.;Na, J.C.;Yu, D.J.;Bang, H.T.;Hwang, I.H.;Ryu, K.S.
    • Korean Journal of Poultry Science
    • /
    • v.35 no.1
    • /
    • pp.79-84
    • /
    • 2008
  • This study was conducted to investigate the effects of feeding herb extract (HE) on productivity, intestinal microflora and blood component profile in broiler chickens. A total of three hundred twenty, 1-d-old male chicks (Ross) were divided into 4 treatments with 5 replicates, 16 birds per replicate. Dietary treatments consisted of four diets; the corn-soybean based control diet, the diet containing HE 0.1%, the diet containing HE 0.2%, and the diet containing HE 0.4%. The Control diet contained 3,100, 3,100, 3,200 kcal/kg ME and 22%, 20%, 18% CP for starter ($0{\sim}2 wk$), grower ($3{\sim}5 wk$), and finisher ($6{\sim}7 wk$) periods, respectively. There were no significant differences in feed intake and BW gain among treatments in starter period. In grower period, the BW gain of HE 0.2%, and HE 0.4% were significantly higher (p<0.05) compared to Control. The 7-wk BW gain of HE 0.2% was significantly higher than Control (p<0.05). The feed intake tended to increase in HE 0.1%, but no difference was detected in feed conversion ratio among treatments. No significant differences were found in blood total cholesterol, triglyceride, HDL-cholesterol, glucose, total protein, and albumin among treatments, but total cholesterol in HE 0.4% decreased significantly as compared with Control. The cfu of Lactobacillus spp., yeast, and E. coli in the guts of chickens fed HE were not different form each other, but tended to increase as compared with Control.

Decitabine in the Treatment of Acute Myeloid Leukemia and Myelodysplastic Syndromes, Which Combined with Complex Karyotype Respectively

  • Gao, Su;Li, Zheng;Fu, Jian-Hong;Hu, Xiao-Hui;Xu, Yang;Jin, Zheng-Ming;Tang, Xiao-Wen;Han, Yue;Chen, Su-Ning;Sun, Ai-Ning;Wu, De-Pei;Qiu, Hui-Ying
    • Asian Pacific Journal of Cancer Prevention
    • /
    • v.16 no.15
    • /
    • pp.6627-6632
    • /
    • 2015
  • Background: We conducted a study exploring the clinical safety and efficacy of decitabine in patients with acute myeloid leukemia (AML) and myelodysplastic syndromes (MDS), combined with a complex karyotype. Materials and Methods: From April 2009 to September 2013, a total of 35 patients with AML/MDS combined with a complex karyotype diagnosed in the First Affiliated Hospital of Soochow University were included for retrospective analysis. All patients were treated with decitabine alone ($20mg/m^2$ daily for 5 days) or combination AAG chemotherapy (Acla 20mg qod*4d, Ara-C $10mg/m^2$ q12h*7d, G-CSF $300{\mu}g$ qd, the dose of G-CSF adjusted to the amount in blood routinely). Results: In 35 patients, 15 exhibited a complete response (CR), and 6 a partial response (PR), the overall response rate (CR+PR) being 60% (21 of 35). Median disease-free survival was 18 months and overall survival was 14 months. In the 15 MDS patients with a complex karyotype, the CR rate was 53.3% (8 of 15); in 20 AML patients with complex karyotype, the overall response rate was 65% (13 of 20). The response rate of decitabine alone (22 cases) was 56.5% (13 of 22), while in the combination chemotherapy group (13 cases), the effective rate was 61.5% (8 of 13)(P>0.05). There are 15 patients with chromosome 7 aberration, after treatment with decitabine, 7 CR, 3 PR, overall response rate was 66.7% (10 of 15). Of 18 patients with 3 to 5 kinds of chromosomal abnormalities, 66.7% demonstrated a response; of 17 with more than 5 chromosomal abnormalities, 52.9% had a response. In the total of 35 patients, with one course (23 patients) and ${\geq}$two courses (12 patients), the overall response rate was 40.9% and 92.3% (P<0.05). Grade III to IV hematological toxicity was observed in 27 cases (75%). Grade III to IV infections were clinically documented in 7 (20%). Grades I to II non-hematological toxicity were infections (18 patients), haematuria (2 patients), and bleeding (3 patients). With follow-up until September 2013, 7 patients were surviving, 18 had died and 10 were lost to follow-up. In the 6 cases who underwent allogeneic hematopoietic stem cell transplantation (HSCT) all were still relapse-free survivors. Conclusions: Decitabine alone or combination with AAG can improve outcome of AML/MDS with a complex karyotype, there being no significant difference decitabine in inducing remission rates in patients with different karyotype. Increasing the number of courses can improve efficiency. This approach with fewer treatment side effects in patients with a better tolerance should be employed in order to create an improved subsequent chance for HSCT.

Temperature-dependent Development of Aphis gossypii Glover and Aphis egomae Shinji on Leaves of Green Perilla and Their Seasonal Abundance Patterns in Protected Greenhouse in Guemsan, Korea (들깨 잎에서 목화진딧물(Aphis gossypii Glover)과 들깨진딧물(Aphis egomae Shinji)의 온도발육 및 금산지역 잎들깨 시설하우스에서 발생소장)

  • Choe, Yong-Seok;Park, Deok-Gi;Han, Kwang-Seop;Choe, Kwang-Ryul
    • Korean journal of applied entomology
    • /
    • v.45 no.3 s.144
    • /
    • pp.269-274
    • /
    • 2006
  • Temperature-dependent development studies of two aphid species, A. egomae and A. gossypii occurring in green perilla greenhouse were conducted at $15{\sim}35^{\circ}C$, and 16:8 (L:D h) of light period in the laboratory. The mortality of two aphid species was high in young stages (1st and 2nd). In A. egomae, the mortalitiy increased with increasing and decreasing temperature: the mortalitie at $15^{\circ}C$ and $35^{\circ}C$ were 22.3% and 15.6%, respectively. While the mortalities of A. gossypii increased with increasing temperature: the mortality at $35^{\circ}C$ was 50.0%. The developmental periods of A. egomae and A. gossypii ranged from 20.8days to 5.4days and from 22.6days to 9.1days at $15^{\circ}C$ to $30^{\circ}C$ of temperature resion, respectively, and were 7.2days and 10.7days at $35^{\circ}C$ for each species. The lower developmental threshold temperatures for total nymphs of A. egoame and A. gossypii were $9.9^{\circ}C$ and $4.9^{\circ}C$, respectively and an effective degree-days (DD) for the developmental completion of total nymph were 108.0 DD for.A. egomae and 221.2DD for A. gossypii. In green perilla greenhouse, the occurrence period of A. gossypii was earlier about 15 days than that of A. egomae. When the occurrence period of two aphid species was estimated by degree-days based on lower threshold temperatures, A. gossypii occurred earlier than A. egomae in the field. A. gossypii occurred from early April and showed dominant position to late May compared with A. egomae Whereas, A egomae started to occur from mid April and then were abundant after late May followed by abrupt population crash around late July.

Induction of Apoptosis and Expression of Apoptosis-related Gene Products in Response to Radiation in Murine Tumors (방사선에 대한 종양의 반응에서 아포프토시스의 유도와 이에 관련되는 유전자 발현)

  • Seong, Jin-Sil;Hunter, Nancv;Milas, Luka
    • Radiation Oncology Journal
    • /
    • v.15 no.3
    • /
    • pp.187-195
    • /
    • 1997
  • Purpose : To analyze the involvement of apoptosis regulatory genes p53, $p21^{wart/cip1}$ bax and bcl-2 in induction of apoptosis by radiation in murine tumors. Materials and methods : The radiation-sensitive ovarian carcinoma OCa-1, and the radiation-resistant hepatocarcinorna HCa-I were used. Tumors, 8 mm in diameter, were irradiated with 25 Gy and at various times after irradiation, ranging from 1 to 48 h, were analyzed histologically for apoptosis and by western blot for alterations in the expression of these genes. The p53 status of the tumors were determined by the polymerase chain reaction-single strand conformation polymorphism assay. Results : Both tumors were positive for wild-type p53. Radiation inducesd apoptosis in OCa-1 but not in HCa-1. Apoptosis developed rapidly, peaked at 2 h after irradiation and returned to almost the background level at 48 h In OCa-1 radiation upregulated the expression of p53, $p21^{wart/cip1}$. and the bcl-2/bax ratio was decreased. In HCa-1 radiation increased the expression of both p53 and $p21^{wart/cip1}$, although the increase of the latter was small The bcl-2/bax ratio was greatly increased. In general the observed changes occurred within a few hours after irradiation, and either preceded or coincided with development of apoptosis Conclusions : The development of apoptosis required upregulation of both p53 and $p21^{wart/cip1}$ as well as a decrease in bcl-2/bax ratio. In contrast, an increase in bcl-2/bax ratio Prevented apoptosis in the presence of upregulated p53 and $p21^{wart/cip1}$ . These findings indentified the involvement of multiple oncogenes in apoptosis regulation in vivo and demonstrate the complexity that may be associated with the use of a single oncogene assessment for Predicting the outcome of cancer therapy with cytotoxic agents.

  • PDF

A Taxonomic Study of the Genera Acanthogobius and Synechogobius (Pisces : Gobiidae) from Korea (한국산(韓國産) 문절망둑 속(屬)과 풀망둑속(屬) 어류(魚類)의 분류학적(分類學的) 연구(硏究))

  • Lee, Yong-Joo
    • Korean Journal of Ichthyology
    • /
    • v.4 no.2
    • /
    • pp.1-25
    • /
    • 1992
  • Taxonomic study of the five species (Acanthogobius elongata, A. flavimanus, A. lactipes, A. luridus and Synechogobius) from Korea was carried out based on morphometric, cephalic sensory canal and ecological characters. Taxonomic revision and classificational keys are provided. Synechogobius hasta is easily distinguished from four species of the genus Acanthogobius in eleven characters, i. e., the number of dorsal and anal fin rays, the transverse scales, the vertebral numbers, the formula of interneural spine of the first dorsal fin, the number of interhemal spine anterior to the first hemal spine, the number of epipleural and pleurals, the ratio of caudal peduncle length, the ratio of caudal peduncle depth and the regular variations in the ratio of body parts with the body length. In the genus Acanthobobius, A. elongata is distinguished from other 3 congeneric species in the ratio of body parts and the oculoscapular sensory canal. Moreover, A. flavimanus differs from other 3 congeneric species in the lateral scales, the transverse scales, the number of predorsal scales, the vertebral number, the number of epipleural and pleurals. Sensory papillae rows of S. hasta is not similar that of the genus Acanthogobius in having a singular sensroy papillae rows. A. elongata has no oculoscapular sensory canal D and A. flavimanus has transverse sensory papillae in cheek, and these are one of the unique characters distinguished form other congeneric species. In the spawning period inferred from gonadosomatic index, A. elongata varied from late March to late June ; A. flavimanus, January to April ; A. lactipes, May to September ; A. luridus, early May to early July and S. hasta, early March to early May.

  • PDF

Dependency of Compatibility Termination Criteria on Prehydration and Bentonite Quality for Geosynthetic Clay Liners (사전투수 및 벤토나이트 품질에 따른 GCL의 투수종결기준에 미치는 영향평가)

  • Lee Jae-Myung;Shackelford Charles D.;Choi Jae-Soon;Jung Moon-Kyung
    • Journal of the Korean Geotechnical Society
    • /
    • v.20 no.7
    • /
    • pp.141-158
    • /
    • 2004
  • The dependency of criteria used to terminate compatibility tests on the prehydration and quality of bentonite in geosynthetic clay liners (GCLs) is evaluated based on permeation with chemical solutions containing 5, 10, 20, 50, and 100 mM calcium chloride ($CaCl_2$). The hydraulic conductivity tests are not terminated before chemical equilibrium between the effluent and the influent chemistry has been established, resulting in test durations ranging from < 1 day to > 900 days, with longer test durations associated with lower $CaCl_2$ concentrations. The evaluation includes both physical termination criteria (i.e., volumetric flow ratio and steady hydraulic conductivity based on ASTM D 5084, ${\ge}2$ pore volumes of flow, constant thickness of specimen) and chemical termination criteria requiring equilibrium between influent and effluent chemistry (viz., electrical conductivity, pH, and $Ca^{2+}\;and\;Cl^-$ concentrations). For specimens permeated with 5, 10, and 20 mM $CaCl_2$ solutions, only the criterion based on chemical equilibrium in $Ca^{2+}$ concentration correlates well with equilibrium in hydraulic conductivity, regardless of prehydration or quality of bentonite. However, all of the termination criteria, except for the volumetric flow ratio and 2 pore volumes of flow for the prehydrated specimens, correlate well with equilibrium in hydraulic conductivity regardless of prehydration or quality of bentonite when permeated with 50 and 100 mM $CaCl_2$ solutions. The results illustrate the uniqueness of the termination criterion based on solute concentration equilibrium between the effluent and the influent with respect to both prehydration and quality of bentonite in the GCLs.

Influence of bone loss pattern on stress distribution in bone and implant: 3D-FEA study (주변 골흡수 양상에 따른 임플란트와 골의 응력분산에 관한 유한요소 분석)

  • Lee, Jong-Hyuk;Kim, Sung-Hun;Lee, Jae-Bong;Han, Jung-Suk;Yang, Jae-Ho
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.48 no.2
    • /
    • pp.111-121
    • /
    • 2010
  • Purpose: This 3D-FEA study was performed to investigate the influence of marginal bone loss pattern around the implant to the stress distribution. Material and methods: From the right second premolar to the right second molar of the mandible was modeled according to the CT data of a dentate patient. Teeth were removed and an implant ($\Phi\;4.0{\times}10.0mm$) was placed in the first molar area. Twelve bone models were created; Studied bone loss conditions were horizontal bone loss and vertical bone loss, assumed bone loss patterns during biologic width formation, and pathologic vertical bone loss with or without cortification. Axial, buccolingual, and oblique force was applied independently to the center of the implant crown. The Maximum von Mises stress value and stress contour was observed and von Mises stresses at the measuring points were recorded. Results: The stress distribution patterns were similar in the non-resorption and horizontal resorption models, but differed from those in the vertical resorption models. Models assuming biologic width formation showed altered stress distribution, and weak bone to implant at the implant neck area seams accelerates stress generation. In case of vertical bone resorption, contact of cortical bone to the implant may positively affect the stress distribution.