• Korean journal of applied entomology
• /
• v.27 no.3
• /
• pp.149-158
• /
• 1988

Nematophagous fungi were successfully isolated by baited plating, centrifugation technique of soil, and direct isolation from naturally ingested nematodes. Predominant seven fungi isolated were identified as Artheobotrys arthroboteyides, A.conoides, A. oligospora, Dactylella lobata, Fusatium oxysporum, Monacrosporium ellopsoporum and Harposporium anguillu-lae. Of these, six fungi were tested for cultural characteristics except. H, anguillulae, extre-mely fastidious fungus in artificial media. Among 14 media tested in this experiment, Corn-meal Agar (CMA) and Oatmeal Agar (OMA) were the most suitable media for growing all six nematophagous fungi. Weakly saprophytic M. ellipsospoyum also grew vigoroualy on these two media. The radial growth, dry weight and sporulation of the fungi tested were quite diverse depending on the culture media. D. lobata revealed good growth and abundantly sporulated on Glucoes Peptone Agar (GPA). Although over-all growth of F, oxysporum was not satisfactory on Sucrose Nitrate Agar (SNA), the sporulation was best on this medium. Optimum conditious for mycelial growth and sporulation of nematophagous fungi ranged pH 5-8 and 20-$30^{\circ}C$ on SNA. D. lobata and F, oxysporum grew vigorously and most profusely sporulated on all media tested. They turned out an most promising biocontrol agents for their aggressive growth and sporulation over the ranges of temperature and pH ranges.

• Journal of Surface Science and Engineering
• /
• v.41 no.4
• /
• pp.147-155
• /
• 2008

The dental orthodontic wire provides a good combination of strength, corrosion resistance and moderate cost. The purpose of this study was to investigate the effects of TiN and ZrN coating on corrosion resistance and physical property of orthodontic wire using various instruments. Wires(round type and rectangular type) were used, respectively, for experiment. Ion plating was carried out for wire using Ti and Zr coating materials with nitrogen gas. Ion plated surface of each specimen was observed with field emission scanning electron microscopy(FE-SEM), energy dispersive X-ray spectroscopy(EDS), atomic force microscopy(AFM), vickers hardness tester, and electrochemical tester. The surface of TiN and ZrN coated wire was more smooth than that of other kinds of non-coated wire. TiN and ZrN coated surface showed higher hardness than that of non-coated surface. The corrosion potential of the TiN coated wire was comparatively high. The current density of TiN coated wire was smaller than that of non-coated wire in 0.9% NaCl solution. Pit nucleated at scratch of wire. The pitting corrosion resistance $|E_{pit}-E_{rep}|$ increased in the order of ZrN coated(300 mV), TiN coated(120 mV) and non-coated wire(0 mV).

• Applied Microscopy
• /
• v.35 no.4
• /
• pp.55-63
• /
• 2005

The characteristics of primary cultured rat brain microvessel endothelial cells (RBMECs) were studied using microscopy, immunohistochemistry and measuring of transendothelial electrical resistance (TER). The RBMECs formed a monolayer by $5{\sim}6$ days after plating and showed characteristics of whirling appearance. The TER increased until day 5 and decreased then. There was few immunoreaction with anti-GFAP, anti-GalC, anti-neurofilament 160/200 kD antibodies. So the contamination of astrocyte, oligodendrocyte, and neuron. could be ruled out.. Immunoreaction to vWF antigen was widespread througout the cytoplasm as Weibel-Palade granule. Immunoreaction to tight junction proteins, i.e. occludin, ZO-1, and ZO-2 was seen at cell contact. In summary, RBMECs isolated and cultured showed morphological, immunohistochemical and electrical characteristics of blood-brain barrier (BBB). The in vitro BBB model can be used in studying characteristics of in vivo BBB.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.5
• /
• pp.675-686
• /
• 2007

Statement of problem: Titanium nitride(TiN) coatings are the most general and popular coating method and used to improve the properties of metallic surface for industrial purposes. When TiN coating applied to the abutment screw, frictional resistance would be reduced, as a results, the greater preload and prevention of the screw loosening could be expected. Purpose: The purpose of this study was to investigate mechanical properties of TiN coated film of various coating thickness on the titanium alloy surface and to evaluate proper coating thickness. Material and method: 95 Titanium alloy (Ti-6Al-4V) discs of 15 mm in diameter and 3 mm in thickness were prepared for TiN coating and divided into 7 groups in this study. Acceding to coating deposition time (CDT) with TiN by using Arc ion plating, were divided into 7 groups : Group A (CDT 30min), Group B (CDT 60min), Group C (CDT 90min), Group D (CDT 120min), Group E (CDT 150min), Group F(CDT 180min) and Group G (no CDT) as a control group. TiN coating surface was observed with Atomic Force Microscope(AFM), field emission scanning electron microscopy(FE-SEM) and examined with scratch tester, wear tester. Result: 1. Coating thickness fir each coated group was increased in proportion to coating deposition time. 2. Surface of all coated groups except Group A was homogeneous and smooth. However, surface of none coated Group G had scratch. 3. Adhesion strength for each coated group was increased in proportion to coating deposition time. 4. Wear resistance for each coated group was increased in proportion to coating deposition time. 5. Surface roughness in Group A, B, C was increased in proportion to coating deposition time. But, surface roughness in Group D, E, F was showed decreased tendency in proportion to coating deposition time. Conclusion: According to coating deposition time, mechanical properties of TiN coated film were changed. It was considered that 120 minutes coating deposition time ($1.32{\mu}m$ in coating thickness) is necessary.

• Korean Journal of Environmental Biology
• /
• v.34 no.3
• /
• pp.212-215
• /
• 2016

We developed a new ecotoxicological test method using native test species, eggs of Ephemera orientalis, and five kinds of industrial wastewater were tested to validate the test method. The water samples were collected in Jun 2006 from the following industries: pesticide, metal plating, PCB, leather1, and leather2. Wastewater and effluent were diluted by distilled water, respectively, to prepare various concentrations, 100, 50, 25, 12.5, 6.3, 3.1, and 0%. For the egg bioassay, 20 freshly laid eggs (<24 h old) were exposed to test solutions in a Petri dish ($52{\times}12mm$) at $20^{\circ}C$ with photoperiod of 16 h light and 8 h dark for 14 days. The median egg hatching concentrations (EHC50) were estimated using Probit analysis. All EHC50s of wastewater were less than 3.1%, which meant very high ecotoxicity except for the wastewater of PCB industry having 6.1% of EHC50. Among the effluents, the least toxic effluent was from pesticide industry having 58% of EHC50, while the effluent of leather2 was the most toxic having 7.3% of EHC50.

• Korean Journal of Ecology and Environment
• /
• v.44 no.3
• /
• pp.272-279
• /
• 2011

Copper cyanide is a chemical produced in large quantities with 2,500 tonnes being produced in 2006. It is mainly used for electroplating copper, particularly alkali-Cu plate and brass plating. The purpose of this study is to reassess the physicochemical properties and environmental fate of copper cyanide based on reliable data and and to conduct an ecotoxicity test according to the OECD test guidelines as an initial environmental risk assessment (need to state where this was done). Metal containing inorganic substances are not subject to degradation, biodegradation or hydrolysis. Aquatic toxicity tests of copper cyanide were conducted according to OECD test guideline 201, 202 and 203 for green algae, daphnia, and fish, respectively. The following acute toxicity test results were obtained for aquatic species: 0.089 mg $L^{-1}$ (Algae, 72 Hr-$EC_{50}$); 0.21 mg $L^{-1}$ (flea, 48 Hr-$LC_{50}$); 0.62 mg $L^{-1}$ (Fish, 96 Hr-$ErC_{50}$). The chemical possesses properties indicating a hazard for the aquatic environment (acute toxicity in fish, daphnia and algae below 1.0 mg $L^{-1}$). As a result of this study, copper cyanide has become a candidate for detailed risk assessment. Countries that produce this chemical in significant quantities are recommended to perform specific assessments.