• Biomolecules & Therapeutics
• /
• v.10 no.1
• /
• pp.50-58
• /
• 2002

lt had been reproted previously that (${\pm}$)6-chloro-7,8-dihydroxy-1-phenyl 2,3,4,5-tetra-hydro -lH-3benzazepine (SKF 81297), dopamine $D_1$ receptor agonist, produced diuresis by both Indirect action through central function and direct action being induced in kidney. This study was attempted in order to examine the diuresis mechanism of such SKF 81297 Diuretic action of SKF 81297 given into the vein or the carotid artery was not affected by renal denervation, whereas diuretic action of SKF 81297 administered into a renal artery was blocked completely by renal denervation, and then diuretic action of SKF 81297 injected into carotid artery was inhibited by SCH 23390, dopamine $D_1$ receptor antagonist, given into carotid artery. Above results suggest that indirect diuretic action of SKF 81297 elicites through central dopamine $D_1$ receptor and direct diuresis in kidney by influence of renal nerves.

• Korean Journal of Materials Research
• /
• v.30 no.11
• /
• pp.627-635
• /
• 2020

3D printing technology is a processing technology in which 3D structures are formed by fabricating multiple 2D layers of materials based on 3D designed digital data and stacking them layer by layer. Although layers are stacked using inkjet printing to release various materials, it is still rare for research to successfully form a product as an additive manufacture of multi-materials. In this study, dispersion conditions are optimized by adding a dispersant to an acrylic monomer suitable for inkjet printing using Co₃O₄ and Al₂O₃. 3D structures having continuous composition composed of a different ceramic material are manufactured by printing using two UV curable ceramic inks whose optimization is advanced. After the heat treatment, the produced structure is checked for the formation and color of the desired crystals by comparing the crystalline analysis according to the characteristics of each part of the structure with ceramic pigments made by solid phase synthesis method.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.2
• /
• pp.197-206
• /
• 2023

Recently, the international community, including the International Maritime Organization (IMO), has strengthened regulations on air pollution emissions of ships, and eco-friendly ships are actively being developed to reduce exhaust gas emissions. Among them, rotor sail (RS), a wind-assisted ship propulsion system, is attracting attention again. RS is a cylindrical device installed on the ship deck, that generates hydrodynamic lift using a magnus effect. This is a next generation eco-friendly auxiliary propulsion technology, and Enercon company, which developed RS-applied ships, announced that fuel savings of more than 30% are possible. In this study, optimal installation conditions such as RS spacing and arrangement type were selected when multiple RSs were installed on ships. AR=5.1, SR=1.0, and D_e/D was fixed at 2.0 according to the RS arrangement, and the wind direction was considered only for the unidirectional +y-axis. Regarding arrangement conditions, five conditions were set at 3D intervals in the +x-axis direction from 3D to 15D and five conditions in the +y-axis direction from 5D to 25D. C_L, C_D and aerodynamic efficiency (C_L/C_D) were compared according to the square(□) and diamond(◇) shape arrangements. Consequently, the effect of RS on the longitudinal distance was not significantly different. However, in the case of RS flow characteristics according to the transverse distance, the interaction effect of RS was the greatest when the two RSs almost matched the wind direction. In the case of the RS flow characteristics according to the arrangement, notably, when the wind blew in the forward (0°) direction, the diamond (◇) arrangement was least affected by the backward flow between RSs.

• Journal of Powder Materials
• /
• v.26 no.6
• /
• pp.477-480
• /
• 2019

Magnetic 0-D Nd₂Fe₁₄B powders are successfully fabricated using 1-D Nd₂Fe₁₄B nanowire formed by an efficient and facile electrospinning process approach. The synthesized Nd-Fe-B fibers and powders are investigated for their microstructural, crystallographic, and magnetic properties according to a series of subsequent heat treatments. Each heat-treatment process leads to the removal of organic impurities and the formation of the respective oxides/composites of Nd, Fe, and B, resulting in the formation of Nd₂Fe₁₄B powders. Nd-Fe-B fibers exhibit the following magnetic properties: The coercivity (H_ci) of 3260 Oe, a maximum magnetization at 3T of 109.44 emu/g, and a magnetization remanence (M_r) of 44.11 emu/g. This process easily mass produces hard magnetic Nd₂Fe₁₄B powders using a 1-D synthesis process and can be extended to the experimental design of other magnetic materials.

• Korean Journal of Optics and Photonics
• /
• v.19 no.6
• /
• pp.435-438
• /
• 2008

D2O, which is used in nuclear power generation, is slightly different from $H_2O$. $D_2O$ consists of deuterium (D), which is an isotope of hydrogen (H) and has one more neutron than H. $D_2O$ is heavier by about 11% than $H_2O$, and $D_2O$ is present in water in natureat about 0.002%. Its melting point and boiling point are $3.81^{\circ}C$ and $101.42^{\circ}C$, respectively. $D_2O$ is harmful to the human body if it replaces water in the human body by more than $25%{\sim}50%$. We have measured the index of refractive and power absorption of 0%, 25%, 50%, 75%, and 100% of $D_2O$ in $H_2O$ using terahertz time-domain spectroscopy, and we have found that the refractive index decreases and power absorption also decreases as the concentration of $D_2O$ increases.

• Conservation Science in Museum
• /
• v.23
• /
• pp.71-90
• /
• 2020

The scientific analysis of a 'F-51D Mustang Fighter'(Registered Cultural Heritage 666), one of the War Memorial of Korean collections, was carried out. The paint layer and canopy were discolored due to a constant outdoor exhibit. The results obtained through the scientific survey and analysis processes were intended to be used as basic data for the future dismantling and restoration of the fighter. The analysis results for the pigment components have confirmed red oxide of iron, Fe₂O₃ organic pigments, such as Cobalt Blue, phthalocyanine blue, etc., yellow PbCrO₄, white TiO₂, black Fe₃O₄, and gray Fe₃O₄ + TiO₂. It has been also confirmed that Alkyd resin was mainly used for painting. The fighter's canopy was Poly methyl methacrylate(PMMA), and Al was detected as the main component of the fighter body, wings, and tails.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.20 no.2
• /
• pp.151-160
• /
• 2022

The sorption of Eu on MX-80 bentonite in Na-Ca-Cl solutions is investigated at a molal proton concentration (pH_m) range of 3 to 10 and an ionic strength (I) range of 0.1 to 6 m (mol·kgw^-1). The sorption equilibrium of Eu on MX-80 is achieved within 14 to 21 d at I = 0.1 and 6 m. The sorption distribution coefficient (K_d) values of Eu for MX-80 increase as pH_m increases from 3 to 6 for all I values, and they are independent of pH_m between 8 and 10 at I ≥ 0.5 m. Meanwhile, at I = 0.1 m, the K_d value at pH_m = 10 is slightly lower than those at pH_m = 8 and 9. The K_d values are not affected by the I values between 0.5 m and 6 m, whereas the K_d value at I = 0.1 m is greater than those at I ≥ 0.5 m, except at pH_m = 10. A two-site protolysis nonelectrostatic surface complexation and cation exchange sorption model is applied to the Eu sorption data for I ≤ 4 m, and the equilibrium constants of the sorption reactions are estimated.

• Transactions of the Korean hydrogen and new energy society
• /
• v.35 no.2
• /
• pp.140-145
• /
• 2024

High temperature co-electrolysis of H₂O-CO₂ mixtures using solid oxide cells has attracted attention as promising CO₂ utilization technology for production of syngas (H₂/CO), feedstock for E-fuel synthesis. For direct supply to E-fuel production such as hydrocarbon and methanol, the outlet gas ratio (H₂/CO/CO₂) of co-electrolysis should be controlled. In this work, current voltage characteristic test and product gas analysis were carried out under various reaction conditions which could attain proper syngas ratio.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1995.11a
• /
• pp.67-70
• /
• 1995

Amorpous As$\sub$10/Ge$\sub$15/Te$\sub$75/ device shows the memory switching characterisite under d.c. bias. In bulk material, a-As$\sub$10/Ge/sub15/Te$\sub$75/s switching voltage range is above 100 volts. Our purposes in this gaudy are decreasing a switching threshold voltage, finding the properties of d.c., a.c. conduction, and the characterisitics of switching threshold voltage fur a-As$\sub$10/Ge$\sub$15/Te$\sub$75/. As the results, the d.c.and a.c. conductivities increase with temperature. From the data of conductivity, various electrical and physical properties are obtained experimentally. The switching threshold voltages decrease with increasing annealing temperature and time, but increase with increasing film thickness and distance of electrode for d.c. bias.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.8
• /
• pp.1188-1195
• /
• 2022

The 6-port phase correlator consists of one in-phase power divider and three 3-dB 90-degree phase difference power dividers, and is mainly used in a demodulation circuit that determines the phase of an input signal. This paper proposes the wideband 6-port phase correlator that consists of an in-phase power divider using a wideband 2:1 impedance transformer with three 37.5-Ω coaxial cables, and a 3-dB 90-degree phase difference power divide using Wireline. The proposed wideband phase correlator fabricated at a center frequency of 1000MHz has the value of the input reflection coefficient(S₁₁ and S₂₂) -14dB or less in the frequency range of 640~1270MHz. Also, the signal transmission characteristic(S_i1), from the in-phase power divider input port to four output ports, has the amplitude of -6.5±0.6dB and the phase error of within ±3.4°, and the signal transmission characteristic(S_i2), from the 90 degree phase difference power divider input port to four output ports, has the amplitude of -6.1±0.6dB and the phase error of within ±6.2°.