• 제목/요약/키워드: D-H Method

검색결과 4,326건 처리시간 0.036초

역상 크로마토그래피에서 모멘트 방법과 van Deemter 식을 이용한 고리형 아데노신 일인산의 분리특성 연구 (Analysis of Cyclic Adenosine Monophosphate (cAMP) Separation via RP-HPLC (reversed-phase high-performance liquid chromatography) by the Moment Method and the van Deemter Equation)

  • 이일송;고관영;김인호
    • Korean Chemical Engineering Research
    • /
    • 제53권6호
    • /
    • pp.723-729
    • /
    • 2015
  • 고성능액체크로마토그래피(high-performance liquid chromatography, HPLC)에서 C18(octadecyl silica, ODS) 칼럼에서 고리형 아데노신 일인산(cyclic adenosine monophosphate, cAMP)의 크로마토그램을 얻은 후, 모멘트 분석을 수행하였다. 일반속도 모델(general rate model, GR model)을 기반으로 first absolute moment와 second central moment를 계산하였다. 모멘트 분석의 중요한 세 가지 계수인 분자확산계수(molecular diffusivity, $D_m$), 외부물질전달계수(external mass transfer coefficient, $k_f$), 입자내부확산계수(intra-particle diffusivity, $D_e$)는 각각 Wilke-Chang 식, Wilson-Geankoplis 식을 이용하고 이론단수(theoretical plate number) 식과 van Deemter 식을 비교하여 계산하였다. 실험은 각각 세 가지의 이동상 조성, 용질 농도, 유량 조건에서 수행하였다. Van Deemter 그래프를 그려 모멘트 분석결과를 정성적으로 정리했으며, 이론단 상당높이(height equivalent to a theoretical plate, HETP, $H_{total}$)에 $H_{ax}$, $H_f$, $H_d$가 미치는 영향을 알아보기 위해 van Deemter coefficient를 비교했다. HETP에 가장 큰 영향을 주는 요인은 입자내부확산($H_d$)이었으며 외부물질 전달($H_f$)는 그 영향이 매우 작았다.

PC기반의 3차원 의학영상 가시화 방법에 관한 연구 (Three-Dimensional Medical Visualization Method on PC)

  • 이진형;이상훈;이태수;최인택;박상경
    • 대한의용생체공학회:학술대회논문집
    • /
    • 대한의용생체공학회 1998년도 추계학술대회
    • /
    • pp.259-260
    • /
    • 1998
  • In this paper, we present a 3D visualization method of medical image on PC. Using morphological method, we used to segment 2D medical images (X-ray CT, MRI). Presented method is treating in some detail two operations : dilation and erosion. Also known as an isosurface, using a constant density surface make a target organ in 3D. In the whole procedure for visualization. The medical images are implemented by using Visual C++ 5.0 in activeX and IDL(interactive data language) under PC environment.

  • PDF

수평유지장치의 $H{\infty}$ 제어 ([ $H{\infty}$ ] Control of Level Maintaining Device)

  • 오영진;서영수
    • 대한전기학회논문지:시스템및제어부문D
    • /
    • 제52권2호
    • /
    • pp.77-84
    • /
    • 2003
  • This paper is concerned with level control of a upper plate in a vehicle. The objective of control is to maintain the upper plate at level regardless of road slopes. The road slope is detected using an accelerometer-type inclinometer and H infinity control method is used to simultaneously reduce effects of road slopes and sensor noises. By the simulation, it is shown that the upper plate is successfully maintained at level.

골프장 그린의 볼마크 수리방법에 따른 벤트그래스의 회복속도 비교 (Comparison of Bentgrass Recovery Speed on Golf Green Followed by Methods of Ball Mark Repair Practise)

  • 박종하;이재필;김두환;주영규
    • 아시안잔디학회지
    • /
    • 제24권2호
    • /
    • pp.211-217
    • /
    • 2010
  • 본 연구는 골프장 그린의 볼마크 수리방법 중 잔디 회복이 빠른 효과적인 방법을 규명하고자 수행하였다. 볼마크 수리방법은 대조구(볼 마크 수리 않음, A방법), 미국의 전통적 2가지 방법(USGA B방법, GCSAA C방법), 국내 골프장의 인력에 의한 3가지 방법(안성베네스트 D, 스카이72 E, 레이크사이드 F방법), 볼마크 수리기(6, 8, 14날)에 의한 3가지 방법(G, H, I방법) 등 모두 9가지 방법이 적용되었다. 공시된 그린의 벤트그래스 품종은 'Penncross', 'T-1', 'CY-2' 3품종이었다. 본 시험은 2009년 9월에서 11월까지 서울 레이크 사이드 골프장(용인시 모현면 능원리)의 nursery에서 행하였다. 전체 벤트그래스 3품종의 평균적 처리별 볼마크 회복율(%)은 E, D, C, B, F, I, H, G, A 순으로 빨랐으며 인력에 의한 볼마크 수리방법이 칼날이 부착된 수리기에 의한 방법보다 효과적이었다. 'Penncross'품종의 볼마크 회복율은 E, D, B, C, F, I, H, A, G 순으로 빨랐고, 'T-1' 품종의 볼마크 회복율은 D, E, B, F, C, H, I, A, G 순으로 빨랐으며, 'CY-2' 품종의 볼 마크 회복율은 D, E, C, F, B, H, G, I, A 순으로 빨랐다. 품종에 따른 볼마크 회복속도는 'CY-2', 'Penncross', 'T-1' 순이었다. 이상의 결과 볼마크 수리는 스카이72 골프장의 인력에 의한 방법인 '볼 마크 중앙의 피해 잔디를 포크로 제거한 후, 손으로 잔디를 두드리면서 안쪽으로 모으고 포크로 끌어당기면서 더 모은다. 둥근 나무막대로 잔디를 평탄하게 다진 후, 마지막으로 잔디에 물을 주는 방법'이 가장 효과적인 볼마크 수립방법으로 나타났다.

A Simple Method for the Monitoring of Photo-induced Alignment of the Azobenzene Molecules in a Poly(malonic ester)

  • Shin, H.D.;Hwang, U.J.;Oh, C.H.;Song, S.H.;Kim, P.S.;Han, Y.K.
    • Journal of Korean Vacuum Science & Technology
    • /
    • 제6권1호
    • /
    • pp.1-4
    • /
    • 2002
  • A simple method for real-time monitoring the molecular orientation in a polymeric film was suggested. This method was examined in the polarization holograms by two recording beams on a poly(malonic ester) containing disperse red 1. The spatial distributions of the photo-induced alignment were measured and analyzed at various polarization states of two recording beams. As the result, the directions of molecular alignments could be identified easily by our method.

  • PDF

Behavior of Hydroxide Ions at the Water-Ice Surface by Low Energy Sputtering Method

  • Kim, S.Y.;Park, E.H.;Kang, H.
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2011년도 제40회 동계학술대회 초록집
    • /
    • pp.338-338
    • /
    • 2011
  • The behavior of hydroxide ions on water-ice films was studied by using $Cs^+$ reactive ion scattering (RIS), low energy sputtering (LES) and temperature-programmed desorption (TPD). A $Cs^+$ beam of a low kinetic energy (<100 eV) from $Cs^+$ ion gun was scattered at the film surface, and then $Cs^+$ projectiles pick up the neutral molecules on the surface as $Cs^+$-molecule clusters form (RIS process). In LES process, the preexisting ions on the surface are desorbed by the $Cs^+$ beam impact. The water-ice films made of a thick (>50 BL) $H_2$O layer and a thin $D_2O$ overlayer were controlled in temperatures 90~140K. We prepared hydroxide ions by using Na atoms which proceeded hydrolysis reaction either on the ice film surface or at the interface of the $H_2O$ and $D_2O$ layers.[1] The migration of hydroxide ions from the $H_2O/D_2O$ interface to the top of the film was examined as afunction of time. From this experiment, we show that hydroxide ions tend to reside at the water-ice surface. We also investigated the H/D exchange reactions of $H_2O$ and $D_2O$ molecules mediated by hydroxide ions to reveal the mechanism of migration of hydroxide to the ice surface.

  • PDF

유전알고리즘을 이용한 선형유도전동기의 다중목적 최적설계 (Multi-Objective Optimization Technique Using Genetic Algorithm and Its Application to Design of Linear Induction Motor)

  • 류근배;최영준;김창업;김송웅;박영춘;김중한;임달호
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1994년도 하계학술대회 논문집 A
    • /
    • pp.165-167
    • /
    • 1994
  • This paper presents a new method for multiobjective optimization using Genetic Algorithm-Sexual Reproduction Model(SR model). In SR model, each individual consists of chromosome pairs. Sex cells(gametes) are produced through artificial meiosis in which crossover and mutation occur, The proposed method has two selection operators, one, individual selection which selects the individual to fertilize, and the other, gamete selection which makes zygote for offspring production, The two selection schemes are repectively conducted according to different fitness(or objective) function and consequently give a solution which is unbiased to any objectives. We apply the proposed method to optimization of the design parameters of Linear Induction Motor(LIM) and show its effectiveness.

  • PDF