• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.402-406
• /
• 2000

In the Over-The-Range, the outlet size is limited by the industrial standards. Therefor to enlarge the volume of cavity, the installation height of ventilation fan is become small, the system resistance is higher than before. For that reason, the important design variables such as the diameter of a fan, the scroll expansion angle, etc. which play the significant role on flow rate and noise, are confined. In this study, we made an experiment of the diameter of fans relation to scroll expansion angle and investigated flow rate of the length of fans in enlarged cavity volume of OTR, and then we designed the new scroll to improve the flow rate and noise level. As a result, flow rate increased to 110% compared to current scroll and the blade passing frequency of a fan is disappeared by inclined cut-off shapes.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.12
• /
• pp.136-141
• /
• 1995

GaAs power MESFETs with 1 .mu.m gate length and an undoped GaAs surface layer on the doped GaAs channel are fabricated using IR(image reversal) and air-birdge processes. And then We have measured and calculated DC and RF characteristics. We have obtained saturation current 107-500 mA (197-255 mA/mm), maximum linear RF output power 111-518.8 mW (204-270 mW/mm), current gain cut-off frequency 7-10 GHz, maximum unilateral transducer power gain 5.7-12.7, and power added efficiencies 37.9-41.2 % from the devices with gate width 0.45-2.2 mm, at 6 GHz.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.376-379
• /
• 2003

In this raper, proposed easy half-wavelength LPF and acceptor structure in actuality manufacture using EBG (Electromagnatic Bandgap) structure for application of micro-strip circuit. Because conventional half-wavelength LPF and acceptor is narrow line-width of High impedance, actuality manufacture is difficult. Width that in proposed structure narrow microstrip line of High impedance EBG structure use and has equal impedance embodied to wide microstrip line. Also, it is seen that actuality manufacture is available applying to half-wavelength LPF that have cut-off Frequency of 3GHz.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.12
• /
• pp.2370-2378
• /
• 2009

The enhanced phase angle estimation algorithm is essential to supply the power stably under synchronizing with grid source. In this paper, we are proposed the novel phase angle estimation algorithm and verified the validity of proposed method as simulation with PSIM and experiments. We sort the harmonics element using high-pass filter(HPF) that have the cut-off frequency below basic element and make reverse d-q transformation. So, it can be restored the harmonics element at stationary axis, and we can get the fundamental voltage element of AC grid. Proposed PLL method have a rapid responsibility and a large margin at controller design than conventional method because it have a small phase delay and a sufficient controller gain margin. And, it can reduce the error of voltage rms value and axis transformation according to robust PLL algorithm against the harmonic and phase unbalance.

• Aerospace Engineering and Technology
• /
• v.6 no.2
• /
• pp.60-65
• /
• 2007

Acoustic chamber was developed for verifying the performance of a satellite under the launch condition on the Space environment test department. As the size of a satellite is increased the extension of existing facility is required. This paper encompasses the following items; redesign of components in acoustic chamber, product procedures of them and review of the test for the components of satellite in the upgraded acoustic chamber.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1995.06a
• /
• pp.221-224
• /
• 1995

In speech signal processing, it is necessary to detect exactly the pitch. The algorithms of pitch extraction with have been proposed until now are difficult to detect pitches over wide range speech signals. In this paper, thus, we proposed a new pitch detection algorithm that used a low pass filter with variable bandwidth. It is the method that preprosses to find the first formant of speech signals by the FFT at each frame and detects the pitches for signals LPFed with the cut off frequency according to the first formant. Applying the method, we obtained the pitch contours, improving the accuracy of pitch detection in some noise environments.

• The Journal of the Acoustical Society of Korea
• /
• v.15 no.2
• /
• pp.101-104
• /
• 1996

The pressure field for the Pekeris model which is consisted of a surface layer of fresh water overlying a thick (essentially semi-infinite) bottom layer of coarse sand is investigated experimentally in a anechoic tank scaled down 1/1,000. The water depth and frequency have been controlled so that the continuous mode integrand has not a resonance close to cut-off, and the experimental results relatively well agree with the theory which is represented as the sum of the discrete modes over a range about 10 times the water depth.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.53 no.1
• /
• pp.30-36
• /
• 2004

An iterative sliding mode observer is proposed to sensorless control of a PMSM(Permanent Magnet Synchronous Motor). The proposed sliding mode observer has the character which is robust to the disturbance and parameters variation. A low pass filter with the variable cut-off frequency is also proposed to compensate the delay of the rotor angle according to the rotor speed, it is led to save memory and minimize operation time. Experimental results show that the proposed sliding mode observer leads to the proper performance.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.312-312
• /
• 2000

Human sensibility ergonomics is applied to evaluation of dynamic performance of a vehicle driving simulator. Vehicle, driving environment, and human perception models are constructed and integrated. Driving simulations are carried out based on these models. This study defines a set verbal expressions collected and investigates which are the most appropriate for describing the fidelity of translational and angular accelerations of the driving simulator. An statistical analysis is uscd to find correlation between the ergonomic sensibility and the cut-off frequency of the washout algorithm. This study suggests a methodology to obtain an ergonomic database which can be used for the performance evaluation of dynamic environments.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.30 no.2
• /
• pp.125-131
• /
• 1994

This paper describes a method to measure the distortion level of loudspeaker using a LMS(Least Mean Square) adaptive filter. Conventional technique to measure the distortion level uses a band-pass filter with a sharp cut-off frequency characteristics. However. such the band-pass filter has a bed time response characteristics. On the other hand, the proposed method offers us an easy way to measure the specified harmonic distortion level with a small hardware. Moreover, our method is not affected by noise which has no correlation with the test signal, and the measurement can be carried out in a noisy environment. The effectiveness of the proposed method is confirmed by experiment using a loudspeaker in a noisy room.