• 한국광학회:학술대회논문집
• /
• 한국광학회 1991년도 제6회 파동 및 레이저 학술발표회 Prodeedings of 6th Conference on Waves and Lasers
• /
• pp.135-138
• /
• 1991

A planar type PIN photodiode has been fabricated and discussed. We used OMVPE systems to grow the structure of u-InP/u-InP/n-InP. P-n junction was formed by Zn-diffusion method at 50$0^{\circ}C$, for 5 minitues. The device characteristics at 5V were as follows: Dark currents were distributed around 1nA. Capacitance was 1.6pF and responsivity was above 0.85 mA/mW for 1.3${\mu}{\textrm}{m}$ wavelength. Measured cut-off frequency(-3dB) at -5V was 1.1㎓.

• 설비공학논문집
• /
• 제22권12호
• /
• pp.897-901
• /
• 2010

A silencer has been widely used for the purpose of suppressing the noises propagated from duct of air conditioning system. The absorption type silencer is usually applied to reduce the noise with high frequency bandwidth. On the order hand, the resonance type silencer is applied to reduce the noise with low-middle frequency bandwidth. The insertion loss of silencer is measured in the reverberation room. The cut-off frequency of reverberation room is 100 Hz. The insertion loss of absorption type silencer is more larger than that for resonance type silencer regardless of changing the flow velocity.

• Journal of Power Electronics
• /
• 제11권1호
• /
• pp.74-81
• /
• 2011

The cutoff frequency of the output LC filters of PWM inverters limits the control bandwidth of the converter system while it attenuates voltage ripples that are caused by inverter switching activities. For a selected cutoff frequency of an output LC filter, an infinite number of L-C combinations is possible. This paper analyses the characteristics of output LC filters for PWM inverters terms of the L-C combinations. Practical circuit conditions such as no-loads, full resistive-loads, and inductive-load conditions are considered in the analysis. This paper proposes a LC filter design method for PWM inverters considering both the voltage ynamics and he inverter stack size. An experimental PWM inverter system based on the proposed output LC lter design uideline is built and tested.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.316-320
• /
• 2008

This paper described the design and fabrication of a series arc detection module to monitor electrical insulation in low-voltage system. The module consists of a passive high-pass filter with a low cut-off frequency of 3 kHz to attenuate power frequency voltage by 80 dB and an active band-pass filter with a frequency of 4 kHz to detect series arc signals only. For the application experiment, we simulated series arcing phenomena on various loads such as incandescent lamp controlled by dimmer and inverter fed induction motors by an arc generator specified in UL1699. From the experimental results, we could detect series arc signals without an influence of noises.

• Journal of electromagnetic engineering and science
• /
• 제13권2호
• /
• pp.127-133
• /
• 2013

We examined the scaling effects of a number of gate_fingers (N) and gate_widths (w) on the high-frequency characteristics of $0.1-{\mu}m$ metamorphic high-electron-mobility transistors. Functional relationships of the extracted small-signal parameters with total gate widths ($w_t$) of different N were proposed. The cut-off frequency ($f_T$) showed an almost independent relationship with $w_t$; however, the maximum frequency of oscillation ($f_{max}$) exhibited a strong functional relationship of gate-resistance ($R_g$) influenced by both N and $w_t$. A greater $w_t$ produced a higher $f_{max}$; but, to maximize $f_{max}$ at a given $w_t$, to increase N was more efficient than to increase the single gate_width.

• 한국안전학회지
• /
• 제36권3호
• /
• pp.66-73
• /
• 2021

This report documents the results of an at-power internal events Level 1 Probabilistic Safety Assessment (PSA) for a Korea research reactor (KRR). The aim of the study is to determine the accident sequences, construct an internal level 1 PSA model, and estimate the core damage frequency (CDF). The accident quantification is performed using the AIMS-PSA software version 1.2c along with a fault tree reliability evaluation expert (FTREX) quantification engine. The KRR PSA model is quantified using a cut-off value of 1.0E-15/yr to eliminate the non-effective minimal cut sets (MCSs). The final result indicates a point estimate of 4.55E-06/yr for the overall CDF attributable to internal initiating events in the core damage state for the KRR. Loss of Electric Power (LOEP) is the predominant contributor to the total CDF via a single initiating event (3.68E-6/yr), providing 80.9% of the CDF. The second largest contributor is the beam tube loss of coolant accident (LOCA), which accounts for 9.9% (4.49E-07/yr) of the CDF.

• 전기전자학회논문지
• /
• 제15권1호
• /
• pp.57-63
• /
• 2011

본 논문에서는 대역폭 조정이 가능한 다중 생체 신호 처리용 대역 통과 필터 회로에 관한 것이다. 일반적인 대역 통과 필터는 출력 단에 연결되는 커패시터 배열의 값을 조절하여 고역 -3dB 차단 주파수를 결정한다. 하지만 본 논문에서 제안하는 대역 통과 필터 회로는 커패시터 대신에, 증폭기에 사용되는 바이어스 전압을 통해 증폭기의 트랜스 컨덕턴스 값을 조절하여 차단 주파수를 조절한다. 이러한 방법은 기존의 방식보다 칩 면적을 최소한 1/10로 줄일 수 있어 저면적 설계가 가능하다. 조정 가능한 고역 -3dB 차단 주파수의 대역은 100Hz에서 1KHz이며 사용된 공정은 0.18um CMOS 표준 공정이다. 저 전력 설계를 위해 회로는 서브 스레쉬 홀드 영역에서 동작하며 공급전압은 1V이고, 회로의 총 전류 소모는 1uA이다.

• Smart Structures and Systems
• /
• 제20권3호
• /
• pp.329-342
• /
• 2017

In this paper, the dispersion characteristics of elastic waves propagation in sandwich nano-beams with functionally graded (FG) face-sheets reinforced with carbon nanotubes (CNTs) is investigated based on various high order shear deformation beam theories (HOSDBTs) as well as nonlocal strain gradient theory (NSGT). In order to align CNTs as symmetric and asymmetric in top and bottom face-sheets with respect to neutral geometric axis of the sandwich nano-beam, various patterns are employed in this analysis. The sandwich nano-beam resting on Pasternak foundation is subjected to thermal, magnetic and electrical fields. In order to involve small scale parameter in governing equations, the NSGT is employed for this analysis. The governing equations of motion are derived using Hamilton's principle based on various HSDBTs. Then the governing equations are solved using analytical method. A detailed parametric study is conducted to study the effects of length scale parameter, different HSDBTs, the nonlocal parameter, various aligning of CNTs in thickness direction of face-sheets, different volume fraction of CNTs, foundation stiffness, applied voltage, magnetic intensity field and temperature change on the wave propagation characteristics of sandwich nano-beam. Also cut-off frequency and phase velocity are investigated in detail. According to results obtained, UU and VA patterns have the same cut-off frequency value but AV pattern has the lower value with respect to them.

• 한국멀티미디어학회논문지
• /
• 제17권2호
• /
• pp.208-217
• /
• 2014

본 논문은 효과적인 물체 검출이 가능하도록 명도값의 변화방향에 따라 수렴하는 경우와 발산하는 경우의 대칭기여도를 적응적으로 제어할 수 있도록 가우시안 함수형태의 위상가중함수를 이용한 적응적 대칭기여도 제어 기반 일반화 대칭변환을 제안하였다. 제안한 방법에서는 먼저 수렴영역과 발산 영역을 정의한 후 정의된 수렴/발산 영역에서 대칭극점과 거리 함수로 표현된 대칭정도에 따라 대칭기여도의 반영 비율을 달리 할 수 있도록 가우시안함수 형태의 위상가중 함수를 사용하였으며, 가우시안함수 형태의 위상 가중함수에서 차단주파수 조절을 통한 대칭기여도의 적응적인 제어를 통해 효과적인 물체 검출이 가능하도록 하였다. 제안한 방안의 성능을 평가하기 위해 IR영상을 포함한 다양한 영상에서 대해 차단주파수 조절을 통한 대칭기여도의 적응적 제어가 물체검출에 미치는 영향을 기존의 GST와 비교, 분석하여 제안한 방법의 우수한 성능을 증명하였다.

• 한국산학기술학회논문지
• /
• 제7권4호
• /
• pp.616-624
• /
• 2006

본 논문은 집중소자가 결합된 결함접지구조를 갖는 초고주파 전송선로의 전기적 특성에 관하여 기술하고 있다. 주기구조의 일종인 결함접지구조를 전송선로에 삽입하면, 등가의 부가적인 인덕턴스와 캐패시턴스에 의하여 표준형 전송선로에는 없던 저역통과, 대역차단 또는 대역통과 특성이 발생하며, 전송선로의 전기적 길이가 늘어나는 지연파 특성이 나타난다. 여기에 다시 저항, 캐패시터, 인덕터와 같은 집중소자가 결합되면 공진주파수의 변화를 포함한 다양한 전송특성의 변화가 발생한다. 본 논문에는 결합되는 집중소자들의 값에 따른 DGS 전송선로의 특성 변화를 예측하고 실험적으로 검증하였다.