• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 2004년도 품질경영모델을 통한 가치 창출
• /
• pp.57-63
• /
• 2004

CUSUM control charts are widely used to monitor processes with small shifts. CUSUM control charts, however, are less effective in detecting for recurring cycles or frequent small shifts in the process. With Shewhart control charts, we have applied the variety of run rules to check the stability of process in addition to the situations that some points fall outside the control limits. In this paper, we propose the Z-CUSUM control chart for monitoring the process with recurring cycles or frequent small shifts by use of the zone concept as like the Shewhart control charts.

• 응용통계연구
• /
• 제27권5호
• /
• pp.787-796
• /
• 2014

Poisson 분포를 따르는 결점수를 관측하여 공정을 관리할 때 표본 크기를 동일하게 유지하기가 힘든 경우가 많다. 이 논문은 표본 크기가 동일하지 않은 경우 Poisson 공정모수의 변화를 탐지하는 GLR(generalized likelihood ratio) 관리도 절차를 제안하고 있다. 또한 제안된 GLR 관리도의 효율을 모의실험을 통하여 기존에 연구된 CUSUM 관리도들과 비교하였다. 모의실험 결과, 제안된 GLR 관리도는 공정모수의 다양한 변화에 대해 효율이 대체적으로 양호했으며, CUSUM 관리도에서 실제 공정모수의 변화값이 미리 지정한 값과 차이가 많이 날 경우 CUSUM 관리도에 비해 효율이 월등히 좋음을 알 수 있었다.

• 산업경영시스템학회지
• /
• 제33권2호
• /
• pp.9-17
• /
• 2010

Complex products may present more than one type of defects and these defects are not always of equal severity. These defects are classified according to their seriousness and effect on product quality and performance. So, demerit systems are very effective systems to monitor the different types of defects. Recently, Kang et al.(2009) proposed the revised Demerit-CUSUM for the evaluation of the Demerit-CUSUM control chart performance exactly. In this paper, we present an advanced Demerit control chart using the double EWMA technique. The double EWMA technique is very efficient and strong method for process control where defects and nonconformities occur with various defect types. Moreover, we compare exact performance of Demerit-CUSUM, Demerit-EWMA and Demerit-DEWMA control chart according to changing sample size or mean shifts magnitude. By the result, we confirm that the performance of Demerit-DEWMA control chart is more than the performance of the Demerit-CUSUM and Demerit-EWMA control chart.

• 품질경영학회지
• /
• 제49권4호
• /
• pp.539-550
• /
• 2021

Purpose: The purpose of this study is to propose a multivariate CUSUM control chart that can detect the out-of-control state fast while monitoring the cross- and auto- correlated multivariate time series data. Methods: We first build models to estimate the observation data and calculate the corresponding residuals. After then, a multivariate CUSUM chart is applied to monitor the residuals instead of the original raw observation data. Vector Autoregression and Artificial Neural Net are selected for the modelling, and Separated-MCUSUM chart is selected for the monitoring. The suggested methods are tested under a number of experimental settings and the performances are compared with those of other existing methods. Results: We find that Artificial Neural Net is more appropriate than Vector Autoregression for the modelling and show the combination of Separated-MCUSUM with Artificial Neural Net outperforms the other alternatives considered in this paper. Conclusion: The suggested chart has many advantages. It can monitor the complicated multivariate data with cross- and auto- correlation, and detects the out-of-control state fast. Unlike other CUSUM charts finding their control limits by trial and error simulation, the suggested chart saves lots of time and effort by approximating its control limit mathematically. We expect that the suggested chart performs not only effectively but also efficiently for monitoring the process with complicated correlations and frequently-changed parameters.

• 품질경영학회지
• /
• 제27권4호
• /
• pp.123-142
• /
• 1999

Conventional SPC assumes that observations are independent. Often in industrial practice, however, observations are not independent. A common approach to building control charts for autocorrelated data is to apply conventional SPC to the residuals from a time series model of the process or is to apply conventional SPC to the weighted or unweighted subgroup means. In this paper, we propose a robust CUSUM control scheme for the detection of level change, without model identification or subgrouping of autocorrelated data. The proposed CUSUM chart and other conventional control charts are compared by a Monte Carlo simulation. It is shown that the proposed CUSUM chart is more effective than conventional CUSUM chart when the process is autocorrelated.

• Journal of the Korean Data and Information Science Society
• /
• 제22권1호
• /
• pp.29-35
• /
• 2011

결점수를 모니터링하기 위한 통계적 공정관리는 생산공정에 널리 사용된다. 결점 수를 모니터링 하는데는 c-관리도가 사용된다. 전통적인 c-관리도는 표본에서 결점의 발생은 포아송분포를 따른다는 가정 하에서 만들어진다. 포아송분포에 대한 가정이 맞지 않을 때에는 X-관리도가 사용될 수 있다. 누적합 관리도는 공정의 작은 변화를 찾는데 유용한 것으로 알려져 있다. 본 논문에서는 다양한 Katz 분포족으로부터 생성된 계수자료에 대하여 3시그마 X-관리도와 누적합 관리도의 효율을 평균런의길이에 근거하여 비교 한다. 즉, 자료가 어떤 분포로부터 생성되었는지 알 수 없을 때, X-관리도와 누적합 관리도를 비교하는 것이다.

• 품질경영학회지
• /
• 제26권1호
• /
• pp.126-142
• /
• 1998

Traditional statistical process control(SPC) assumes that consective observations from a process are independent. In industrial practice, however, observations are ofter serially correlated. A common a, pp.oach to building control charts for autocorrelatd data is to a, pp.y classical SPC to the residuals from a time series model fitted. Unfortunately, one cannot completely escape the effects of autocorrelation by using charts based on residuals of time series model. For the detection of variance change in the process we propose a CUSUM of squares control chart which does not require the model identification. The proposed CUSUM of squares chart and the conventional control charts are compared by a Monte Carlo simulation. It is shown that the CUSUM of squares chart is more effective in the presence of dependency in the processes.

• 품질경영학회지
• /
• 제33권3호
• /
• pp.149-155
• /
• 2005

Cusum control chart is used for the purpose of controling the process mean. We consider the problem related to cusum chart for controling process variance. Previous researches have considered the same problem. The main difficulty shown in the related researches was to derive the ARL function which characterizes the properties of the chart. Sample variance, differently with sample mean, follows chi-squared type distribution, even when the quality characteristics are assumed to be normally distributed. The ARL function of cusum is described by a type of integral equation. Since the solution of the integral equation for non-normal distribution is not known well, people used simulation method instead of solving the integral equation directly, or approximation method by taking logarithm of the sample variance. Recently a new method to solve the integral equation for Erlang distribution was published. Here we consider the steps to apply the solution to the problem of controling process variance.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 2006년도 춘계학술대회
• /
• pp.135-141
• /
• 2006

Cusum control chart is used for the purpose of controling the process mean. We consider the problem related to cusum chart for controling process variance. Previous researches have considered the same problem. The main difficulty shown in the related researches was to derive the ARL function which characterizes the properties of the chart. Sample variance, differently with sample mean, follows chi-squared type distribution, even when the quality characteristics are assumed to be normally distributed. The ARL function of cusum is described by a type of integral equation. Since the solution of the integral equation for non-normal distribution is not known well, people used simulation method instead of solving the integral equation directly, or approximation method by taking logarithm of the sample variance. Recently a new method to solve the integral equation for Erlang distribution was published. Here we consider the steps to apply the solution to the problem of controling process variance.

• Communications for Statistical Applications and Methods
• /
• 제29권4호
• /
• pp.487-498
• /
• 2022

Social network analysis (SNA) techniques have recently been developed to monitor and detect abnormal behaviors in social networks. As a useful tool for process monitoring, control charts are also useful for network monitoring. In this paper, the degree and closeness centrality measures, in which each has global and local perspectives, respectively, are applied to an exponentially weighted moving average (EWMA) chart and a multinomial cumulative sum (CUSUM) chart for monitoring undirected weighted networks. In general, EWMA charts monitor only one variable in a single chart, whereas multinomial CUSUM charts can monitor a categorical variable, in which several variables are transformed through classification rules, in a single chart. To monitor both degree centrality and closeness centrality simultaneously, we categorize them based on the average of each measure and then apply to the multinomial CUSUM chart. In this case, the global and local attributes of the network can be monitored simultaneously with a single chart. We also evaluate the performance of the proposed procedure through a simulation study.