• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1993년도 Fifth International Fuzzy Systems Association World Congress 93
• /
• pp.865-868
• /
• 1993

This paper describes a simple random signal generator employing by CMOS analog technology in current mode. The system is a nonlinear dynamical system described by a difference equation, such as x(t＋1) = f(x(t)) , t = 0,1,2, ... , where f($.$) is a nonlinear function of x(f). The tent map is used as a nonlinear function to produce the random signals with the uniform distribution. The prototype is implemented by using transistor array devices fabricated in a mass product line. It can be easily realized on a chip. Uniform randomness of the signal is examined by the serial correlation test and the $\chi$2 test.

• 한국전자파학회논문지
• /
• 제15권6호
• /
• pp.540-547
• /
• 2004

본 논문에서는 900 MHz대역에서 70 % 이상의 고효율을 갖는 전류 모드 D급 전력증폭기를 설계, 제작하였다. 푸시-풀 B급 전력증폭기의 구조를 기초로 하여 병렬 고조파 컨트롤 회로를 적용하여, 기존 D급 전력증폭기의 큰 손실 요인이었던 소자 내 커패시턴스의 충, 방전에 의한 전력 손실을 최소화하였다. 측정결과, 900 MHz 대역, 출력전력 3.2 W에서 73 % 전력 부가 효율, 그리고 출력전력 5 W에서 72 % 전력 부가 효율을 각각 얻었으며 DC 전력에 따라 출력의 크기가 선형적으로 변화하는 D급 전력증폭기의 특성을 확인하였다.

• 전기학회논문지
• /
• 제59권3호
• /
• pp.555-561
• /
• 2010

In this paper, the constant current controller is designed to regulate the driving current of a power LED. The controller design model of the power LED including its driving circuit is proposed to design the constant current controller. A buck converter is also introduced to drive the power LED. The PI-based digital controller is implemented to validate the proposed strategy for the power LED driving.

• 전력전자학회논문지
• /
• 제6권5호
• /
• pp.423-431
• /
• 2001

최근의 유도전동기 구동 시스템은 고속의 ON, OFF동작 특성을 가진 전력 반도체 소자를 가진 인버터와 이를 제어하기 위한 SVPWM(Space Vector PWM)제어이론에 의하여 주로 구성되어 있다. 이러한 PWM 인버터는 정현파 형태의 전압과 전류를 얻기 위해 높은 스위칭 주파수로 동작을 하게 되고, 매 스위칭이 일어나는 순간마다 di/dt 및 dv/dt가 매우 크기 때문에 무시할 수 없는 양의 고주파 누설전류가 고정자 권선과 프레임 사이에 존재하는 기생 커패시터를 통해 접지로 흐르게 된다. 이로 인해 누전보호 계전기의 오동작 및 모터 권선의 절연파괴에 의한 모터의 수명단축 등과 같은 문제점을 야기하게 된다. 본 논문에서는 이러한 문제점을 일으키는 고주파 누설 전류와 커먼 모드 전압을 감쇄하기 위하여 4 레벨 반파 브릿지 인버터에 의해 커먼 모드 전압과 크기가 같고 극성이 반대인 전압을 생성하고, 이 전압을 커먼 모드 트랜스포머에 인가하여 누설 전류의 원인이 되는 커먼 모드 전압을 상쇄시킬 수 있는 새로운 형태의 능동형 커먼 모드 전압 감쇄기를 제안하였다. 제안된 감쇄기의 동작 성능을 P-SPICE를 이용한 시뮬레이션 및 실험을 통하여 검증하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 ITC-CSCC -2
• /
• pp.559-562
• /
• 2000

The problem of noise generation due to PWM switched-mode power converter has been widely noticed from the viewpoint of Electromagnetic Interference(EMI). Many kings of topologies for resonant converters have been developed both to overcome this noise problem and to attain high power efficiency. It is reported in references that resonant converters which are derived from PWM converter using resonant switch show much lower noise characteristics than PWM converter, and that current-mode resonant converter is more sensitive to stored charge in rectifying diode than voltage-mode counterpart concerning surge generation at diode’s turn-off. On the other hand, above mentioned resonant converters have defect of high-voltage stress on semiconductor switch and complicated circuit configuration. Hence, the simplified Forward-type resonant converter has been proposed and investigated due to its prominent features of simplicity of circuit configuration, low voltage stress and high stability. However, its noise characteristics still remain unknown. The purpose of this paper is to study quantitatively the noise characteristics of this simplified Forward-type resonant converter by experiment and analysis. The influence of parasitic elements and stored charge in rectifying diode on noise generation has been clarified.

• Journal of Power Electronics
• /
• 제19권1호
• /
• pp.11-23
• /
• 2019

In this study, a novel zero voltage zero current transition (ZVZCT) bidirectional DC-DC converter is proposed by employing coupled inductors. This converter can turn the main switch on at ZVZCT and it can turn it off with zero voltage switching (ZVS) for both the boost and buck modes. These characteristics are obtained by using a simple auxiliary sub-circuit regardless of the power flow direction. In the boost mode, the auxiliary switch achieves zero current switching (ZCS) turn-on and ZVS turn off. Due to the coupling inductors, this converter can make further efficiency improvements because the resonant energy in the capacitor or inductor can be transferred to the load. The main diode operates with ZVT turn-on and ZCS turn-off in the boost mode. For the buck mode, there is a releasing circuit to conduct the currents generated by the magnetic flux leakage to the output. The auxiliary switch turns on with ZCS and it turns off with ZVT. The main diode also turns on with ZVT and turns off with ZCS. The design method and operation principles of the converter are discussed. A 500 W experimental prototype has been built and verified by experimental results.

• Journal of Electrical Engineering and Technology
• /
• 제10권1호
• /
• pp.195-204
• /
• 2015

In this paper, the development of a cost-effective active power filter/uninterruptible power supply (APF/UPS) system with seamless mode transfer is described. The proposed scheme employs a pulse-width-modulation (PWM) voltage-source inverter and has two operational modes. First, when the source voltage is normal, the system operates as an APF, which compensates for the harmonics and power factor while boosting the DC-link voltage to be ready for the disturbance, without an additional DC charging circuit. A simple algorithm to detect the load current harmonics is also proposed. Second, when the source voltage is out of the normal range (owing to sag, swell, or outage), it operates a UPS, which controls the output voltage constantly by discharging the DC-link capacitor. Furthermore, a seamless transfer method for the single-phase inverter between the APF mode and the UPS mode is also proposed, in which an IGBT switch with diodes is used as a static bypass switch. Dissimilar to a conventional SCR switch, the IGBT switch can implement a seamless mode transfer. During the UPS operation, when the source voltage returns to the normal range, the system operates as an APF. The proposed system has good transient and steady-state response characteristics. The APF, charging circuit, and UPS systems are implemented in one inverter system. Finally, the validity of the proposed scheme is investigated with simulated and experimental results for a prototype APF/UPS system rated at 3 kVA.

• 전기전자학회논문지
• /
• 제23권3호
• /
• pp.873-877
• /
• 2019

본 논문에서는 휴대단말기 안테나의 대표적 형태인 역 F 안테나(Inverted F Antenna, IFA)와 루프(Loop) 안테나에 따른 디지털 노이즈의 결합(coupling) 정도를 특성모드(characteristic mode)를 사용하여 분석한다. 우선, 안테나를 포함한 인쇄회로기판(Printed Circuit Board, PCB)의 특성모드 전류와 디지털 신호라인의 방향에 따른 결합 정도를 비교 분석하고, 이를 토대로 휴대단말기의 WiFi 안테나와 전방 카메라(front camera)의 결합에 대해서 분석한다. 분석을 위해서 카메라 모듈의 FPCB의 디지털 신호선과 그라운드 선을 PCB 그라운드의 특성 모드를 여기(excitation) 시키는 루프형 피더(feeder)로 모델링 했고, 안테나 타입(type)에 따른 노이즈 결합 변화에 대해서 분석을 했다.

• 한국해양공학회지
• /
• 제20권6호
• /
• pp.18-23
• /
• 2006

This paper introduces the results of the development of a new mobile digital DC-arc welding machine (DDWM). A simple PI controller is applied to the DDWM to control the output welding current that is tracking the constant setting current. Furthermore, a hot-start function, an anti-stuck function, a standby mode and an intelligential circuit breaker (ICB) are included in the DDWM. The DDWM increases welding quality and saves more power energy than a conventional welding machine. The DDWM is changed from ready mode into the standby mode, automatically, after 2-minute intervals from this unload start. Then, the DDWM is changed into ready mode, automatically, since it is reused for welding. Moreover, the DDWM increases welding quality, productivity and reduces costs of welding. So, the DDWM can make a considerable contribution to the mobile welding industries. The effectiveness of the DDWM was proven by the experimental results.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2006년도 전기학술대회논문집
• /
• pp.71-72
• /
• 2006

This paper introduces the results of the development of a new mobile Digital DC-arc Welding Machine (DDWM). A simple PI controller is applied to the DDWM to control the output welding current tracking the constant setting current. Furthermore, a hot-start function, an anti-stuck function, a standby mode and an intelligential circuit breaker (ICB) are included in the DDWM. The DDWM increases welding quality and saves more power energy than a conventional welding machine. Because the DDWM is changed from ready mode into the standby mode automatically after 2 minutes interval from this unload start. Then the DDWM is changed into ready mode automatically since it is reused to weld. Mover, the DDWM increases welding qualify, productivity and reduces costs of welding. So, the DDWM can have a great of contribution to the mobile welding industries. The effectiveness of the DDWM was proven by the experimental results and durable test.