• Journal of Magnetics
• /
• 제16권4호
• /
• pp.391-397
• /
• 2011

An inductance measurement method for interior permanent magnet synchronous machine (IPMSM) is proposed in this paper. In this method, the motor is measured at standstill condition, and only a 3-phase voltage source, an oscilloscope and a DC voltage source are required. Depending on the deductive dq-axis voltage equations in the stationary frame of reference, the dq-axis inductances at different current magnitude and vector angle can be calculated by the measured 3-phase voltages and currents. And hence, the saturation and cross-magnetizing effect of the inductances are measurable. This paper introduces the principle equations, experiment setup, data processing, and results comparison on the concentrated-winding and distributed-winding IPMSMs.

• 한국도서관정보학회지
• /
• 제23권
• /
• pp.253-284
• /
• 1995

The purpose of this paper is to analyse the current status of reference education and to suggest directions for reference education in America and in Korea. For this purpose, the historical developments of reference services, and the names, problems and changes of reference courses are studied. The findings of the study can be summarized as follows; 1. The names of reference courses are various. In America, On-Line Services or Information Services are used in general, but in Korea, Reference Services are widely used. 2. In America, some library schools have only subject literature courses including business, law, music, etc. instead of basic reference courses. 3. Only one reference course is given by most schools in America and in Korea. However, a few schools which have no graduate courses provide two reference courses in Korea. 4. Analysis of textbooks used in reference courses shows that Reference Research by Joon-Shik Park, Reference Services and Reference Sources by Ock-Soon Noh are used in general. In addition, Introduction to Reference Work by Katz is used. 5. Lecture methods are generally used in teaching reference courses, but reviews of reference materials in library, class presentation, and case study method are also used. It is desirable that role playing and pathfinders' used in U.S. are introduced to our schools. 6. Analysis of library user instruction courses in Korea shows that 7 of 11 universities have the courses,, only one university teaches library user instruction as a part of reference courses, 3 universities don't. 7. Analysis of opinions about the directions for reference education shows that changes of reference courses names, expansion of courses contents, emphasis on communication technique, changes of teaching methods, proper combination of theory vs. practice, an increase in electronic reference education and training of subject specialist are needed.

• 전자공학회논문지
• /
• 제52권2호
• /
• pp.106-111
• /
• 2015

일반적으로 기준전압 생성기는 쌍안정성을 가지므로 이를 올바른 상태에서 동작시키기 위해서는 적절한 시동회로가 필요하다. 본 논문에서는 저전압 기준전압 발생기를 위한 새로운 시동회로를 제안한다. 제안한 시동회로는 기준전압발생기의 상태를 결정하기 위하여 기준전압 발생기의 BJT에 흐르는 전류를 측정한다. 기준전압발생기가 올바른 상태에 있을 때 이 전류가 가지는 값은 잘 정의되므로 이를 통하여 회로의 상태를 신뢰성 있게 결정할 수 있다. 전류는 내부에 오프셋 전압을 갖는 비교기를 이용하여 측정하였다. 130nm CMOS 공정을 이용하여 설계를 하였으며, 레이아웃에서 추출한 기생 성분을 포함하는 Monte-Carlo 시뮬레이션을 통해 회로의 성능을 검증 하였다. 제안된 시동회로를 사용하는 기준전압발생기에 850mV 이상의 전원 전압이 가해질 경우, 소자에 미스매치가 있더라도 안정적으로 기준전압 생성기가 시동하는 것을 확인하였다.

• 한국문헌정보학회지
• /
• 제33권4호
• /
• pp.65-83
• /
• 1999

본 연구는 서지적으로 관련된 저작을 연결하고, 특정 저자의 상이한 이름이나 특정 저작의 상이한 서명을 직접 접근점으로 사용하기 위해, 전거표목을 배제한 시스템을 제안하고 있다. 이를 위해, 특정 접근점과 그 이형(異形)에 대한 참조와 이들간의 서지적 관계유형을 제공할 수 있는 레코드의 형식을 개발하여 참조시스템을 제안하였다. 아울러 전통적인 표목 및 상호참조의 기능을 본 시스템과 관련하여 검토하였다.

• Transactions on Electrical and Electronic Materials
• /
• 제17권5호
• /
• pp.289-292
• /
• 2016

This paper dealt with the optimal design of a follow current disconnector for DC arresters used in electric traction vehicles. The disconnector separates the ground lead from an arrester to prevent a line-to-ground fault of an aged arrester and should not affect the operation and function such as the reference and the clamping voltage of the connected arrester. The designed disconnector is composed of a resistor, a spark gap, and a cartridge. The results showed that the sparkover voltage increased with the gap distance whereas the reference voltage was almost the same as that without the disconnector. The sparkover voltage was 3.95 kV when the gap distance was 0.5 mm. Regardless of the gap distance, the reference and the clamping voltage of the assembled disconnector with an arrester were measured to be the same as those of the arrester alone.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.145-147
• /
• 2005

In present, most of metallic structures(gas pipeline, oil pipeline, water pipeline, etc) are running parallel with subway and power line in seoul. Moreover subway system and power line make a stray current due to electrical corrosion on metallic structures. The owner of metallic structures has a burden of responsibility for the protection of corrosion and the prevention against big accident such as gas explosion or soil pollution and so on. So, they have to measure and analyze the data about P/S(Pipe to Soil) potential due to stray current of subway system. So, we have developed the Real-time Wireless Remote Monitoring System for Stray Current of Subway System. In this system, the permanent buried type reference electrode is necessary. In this paper, results of development of buried type reference electrode using porous ceramic$({\alpha}-Al_{2}O_{3})$ are presented.

• Journal of Power Electronics
• /
• 제13권1호
• /
• pp.122-138
• /
• 2013

Adaptive control of a peak current mode controlled (PCM) boost converter supplied by a PEM fuel cell is described in this paper. The adaptive controller with reference model and signal adaptation is developed in order to compensate the deviation of the response during the change of the operating point. The procedure for determining the adaptive algorithm's weighting coefficients, based on a combination of the pole-zero placement method and an optimization method is proposed. After applying the proposed procedure, the optimal adaptive algorithm's weighting coefficients can be determined in just a few iterations, without the use of a computer, thus greatly facilitating the application of the algorithm in real systems. Simulation and experimental results show that the dynamic behavior of a highly nonlinear control system with a fuel cell and a PCM boost converter, can fairly accurately be described by the dynamic behavior of the reference model, i.e., a linear system with constant parameters.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1480-1482
• /
• 2005

The major causes of power quality deterioration are harmonic current through semiconductor switching device, due to use of nonlinear loads such as diodes rectifier or thyristor rectifiers. In response to this concerns, this paper presents a new control method of single-phase active power filter(APF) for the compensation of harmonic current components in nonlinear loads. In order to make the complex calculation to be possible, the single-phase system that has two phases was made by constructing a imaginary second-phase giving time delay to load currents. In the conventional method, a imaginary-phase lagged to the load current T/4(here T is the fundamental cycle) was made. But in this proposed method, the new signal, which has the delayed phase through the filter, using the phase-delay property of low-pass filter, was used as the second phase. As this control method is applied to the system of single phase, an instantaneous calculation was done rather by using the rotating reference frames that synchronizes with source-frequency than by applying instantaneous reactive power theory that uses the conventional fixed reference frames.

• 전력전자학회논문지
• /
• 제27권5호
• /
• pp.367-375
• /
• 2022

Generally, a proportional-resonant controller is used to eliminate steady-state errors during the voltage-current control of a double-conversion uninterruptible power supply (UPS) in a stationary reference frame. Additionally, the feed-forward control compensating for the load current, which can be considered a disturbance of the voltage controller, can be used to improve the disturbance rejection performance. However, during the parallel operation of UPSs, circulating current can occur between UPS modules when performing both feed-forward control and droop control because feed-forward control reduces the circulating current impedance. This study proposes a feed-forward compensation technique that considers the impedance of circulating current. An additional feed-forward compensation technique is developed to enhance the disturbance rejection performance. The validity of the proposed feed-forward compensation technique is verified by the experiment results of the parallel operation of a 500 W double-conversion UPS module.

• 전력전자학회논문지
• /
• 제28권1호
• /
• pp.30-38
• /
• 2023

In this paper, a constant current(CC) and constant voltage(CV) control method using a primary-side regulated(PSR) fly-buck converter is proposed. Because the primary-side structure of the fly-buck converter is the same as that of the synchronous buck converter, it always operates in continuous conduction mode(CCM). Therefore, in the proposed method, the load information on the secondary side can always be easily estimated by measuring the primary inductor current at the midpoint of the switch-on period. An accurate CC/CV control can be achieved through simple calculations based on this estimated information. Consequently, the proposed method is advantageous for optimizing the control performance of the PSR converter. The validity of the proposed control was verified using a 5 W prototype of a PSR fly-buck converter. The experimental results confirmed that the current reference of 500 mA was followed within the error range of 1.2%, and that the voltage reference of 12 V was followed within the error range of 1.8% despite the indirect control of the load current and output voltage from the primary side.