• 한국정밀공학회지
• /
• 제24권9호
• /
• pp.52-59
• /
• 2007

Fuel injection system greatly affects the performance of a direct injection diesel engine. A common rail injection system was introduced to satisfy the stringent emission standards, low fuel consumption, and low noise in recent years. The performance of a common-rail fuel injection system is strongly influenced by the injector characteristics. The common rail injector has evolved in order to improve its injection performance. The piezo-actuated injector is more suitable for common rail injection system due to its fast response and is expected to replace current solenoid-operated injector. In this study, nonlinear mathematical models are proposed for the solenoid-operated and the piezo-actuated injectors for control applications. Based on these models, the injection rate, which is one of the most important factors for the injection characteristics, is estimated using sliding mode observer. The simulation results and the experimental data show that the proposed sliding mode observers can effectively estimate the injection timing and the injection rate for both common-rail injectors.

• Journal of Magnetics
• /
• 제13권3호
• /
• pp.81-84
• /
• 2008

Spin injection and detection in lateral spin valves with double nonmagnetic bottom electrodes are investigated theoretically. Spin-polarized current injected from a magnetic electrode is split to two bottom electrodes, and nonlocal spin signals between the other magnetic electrode and the nonmagnetic electrodes are calculated from drift-diffusion equations. It is shown that the spin signal is approximately proportional to the associated current in the electrode.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 A
• /
• pp.92-94
• /
• 1999

This paper describes the interruption techniques of HVDC circuit breaker which adapts inverse current injection method. A representative circuit configuration of this type of HVDC circuit breaker is presented and its operational mechanism and timing diagrams are investigated.

• 전력전자학회논문지
• /
• 제8권2호
• /
• pp.173-179
• /
• 2003

본 논문은 3상 PWM 컨버터의 커패시터의 용량을 온라인으로 추정하는 새로운 기법을 제안한다. 무부하 상태의 PWM 컨버터에 저주파수의 입력전류를 주입하면 직류링크단에 이에 대응되는 리플전압이 발생된다. 직류링크단의 리플전압과 전류를 검출하여 커패시터의 용량을 계산한다. 제안된 방법에 의해 계산된 커패시터의 용량의 추정오차는 2% 이내이다.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2004년도 하계학술발표회
• /
• pp.26-27
• /
• 2004

We present the first demonstration of the vertical-injection depleted optical thyristor laster diode with InGaAs/InGaAsP multiple quantum well structure. The measured switching voltage and current are 3.36 V and 10 A respectively. The holding voltage and current are respectively 1.37 V, 100 A. The lasing threshold current is 131 mA at 25 C. The output peak wavelength is at 1578 nm at a bias current equal to 1.22 times threshold.

• 대한전자공학회논문지SD
• /
• 제39권3호
• /
• pp.9-19
• /
• 2002

본 논문에서는 thermionic emission 모델을 이용하여 SCH 양자우물 레이저 다이오드에 대한 L-I-V특성을 해석적으로 도출하였다. SCH의 bulk 캐리어와 양자우물 속박 캐리어의 관계를 도출하였고, 주입된 전류를 각 영역에서의 캐리어 재결합을 고려한 전류 연속 방정식을 만족하도록 하였다. 또한, high level injection과 전하 중성 조건하에 ambipolar 확산 방정식을 이용하여 캐리어 분포를 고찰하였다. 위 해석적인 모델을 이용하여 계산한 결과, 클래딩 영역의 전위장벽 변화가 전류 전압 특성 변화의 주요 원인으로 나타났다. 또한 thermionic emission에 의한 주입 전류의 forward flux 증가가 캐리어 주입을 증가시키고, 레이저 다이오드의 직렬 저항을 감소시키는 것을 보였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.165-167
• /
• 2001

Emitter injection efficiency of p+/n-buffer Junction with Gaussian impurity distribution is presented. This model takes into account the variation of the carrier lifetime with injection level which allows a unified interpretation of the injection efficiency for all injection level. The injected carrier density and injection efficiency of the anode are calculated as a function of the current density with the low level lifetime as a parameter for different thicknesses of the anode. The analytical results agree well with simulation.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.723-726
• /
• 2001

The design of delivery system is one of the most important subject in injection molding. Delivery system is a channel to flow the polymer melt from the injection molding machine to the mold cavities and affect quality and productivity of the part. The synthesis of delivery system of injection molding has been done empirically, since it requires profound knowledge about the moldability and causal effects on the properties of the part, which are not available to designers through the current CAD systems. A knowledge-based CAD system is constructed by adding the knowledge module to an existing geometric modeler and contains knowledge to permit non-experts ad well as mold design experts to generate the acceptable geometries of gate and runner for injection molded parts.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1991년도 추계학술대회 논문집
• /
• pp.44-47
• /
• 1991

Electron injection and memory retention chracteristics of the MNOS devices with thin oxide layer of 23${\AA}$ thick and silicon nitride layer of 1000${\AA}$ thick which are fabricated for this experiment. As a result, pulse amplitude increase oxide current is dominated in linearly increasing region of $\Delta$V$\_$FB/the decreasing region after saturation was due to the increased silicon nirtide current. In low pulse ampiltude $\Delta$V$\_$FB/ is not variated on temperature, but as temperature and pulse amplitude increase. $\Delta$V$\_$FB/ is decreased after saturation. And the decay rate during 10$^4$sec after electron injection was ohiefly dominated by the back tunneling of emission from memory trap to silicon. Memory retention characteristics in V$\_$FB/ stage was better than that of OV retention regardless of injection conditions.

• Progress in Superconductivity
• /
• 제3권1호
• /
• pp.41-44
• /
• 2001

We report the current transport properties of a normal metal/organic conductor/ superconductor tunnel junction as a novel high- $T_{c}$ superconducting three terminal device. The organic copper (II) phthalocyanine (Cu-Pc) layer was used far a polaronic quasiparticle (QP) injector. The injection of polaronic QP from the Cu-Pc interlayer into a superconductor $Bi_2$$Sr_2$$CaCu_2$ $O_{8+}$ $\delta$/(BSCCO) thin film generated a substantially larger nonequilibrium effect as compared to the normal QP injection current. The tunneling spectroscopy of an Au/cu-PC/BSCCO junction exhibited a zero bias conductance peak which may be due to Andreev reflection at a Cu-Pc/d-wave superconductor junction.n..