• 전력전자학회논문지
• /
• 제6권4호
• /
• pp.341-347
• /
• 2001

전류 동기 검출법은 3상이 불평형된 전원 시스템 하에서도 전원전류를 평형된 정현파로 보상해 줄 뿐 만 아니라 순시전력이론에 비해서 단상에도 적용가능한 이론이다. 그러나 종전의 전류 동기 검출법은 능동전력필터가 고조파 성분과 기본파 무효성분을 독립 제어하는 하이브리드형 능동전력필터 시스템 등에는 적용하기 곤란하다. 따라서 본 연구에서는 불평형 전원 시스템 하에서도 비선형 부하전류를 유효성분, 기본파 무효성분 그리고 왜형성분으로 분해하여 독립제어 가능한 확장된 전류 동기 검출법을 제시하였다. 본 연구에서 제시한 방법의 타당성을 입증하기 위해, 불평형 교류 전원 하에서 평균전력이론, 동기 전류 검출법 그리고 제안된 방법을 실험에 의하여 비교검토하였다.

• 한국수학교육학회지시리즈D:수학교육연구
• /
• 제6권1호
• /
• pp.29-38
• /
• 2002

The purpose of this paper was to examine early numerical representations between American and Korean children. Fifty-five first graders (35 Korean and 20 American) participated in the study. According to the findings of the current study, the author concluded that the Korean children had a stronger conception of base ten representations of numbers than that of the American children. The Korean children used various strategic reasoning such as decomposition and recomposition on the basis of base 10 structure to solve addition and subtraction problems effectively. However, the author cannot conclude that language differences would be the largest factor that would make Korean children sapient in the representations of base ten structures.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1999년도 제14차 학술회의논문집
• /
• pp.161-164
• /
• 1999

An effective approach to lane detection in driver assistance system (DAS) is proposed, based on the decomposition of lane markings. The properties of the decomposed lane markings are discussed, and analyses on lane curvature are given. The current lane on road is detected quickly, the neighboring lane regions are also extracted for lane planning of the vehicle, and the parameters of lane structure are accurately estimated.

• Journal of Magnetics
• /
• 제17권1호
• /
• pp.9-12
• /
• 2012

Attempts to dope carbon nanotube (CNT) with impurities in order to control the electronic properties of the CNT is a natural course of action. Boron is known to improve both the structural and electronic properties. In this report, we study the field emission properties of Boron-doped double-walled CNT (DWCNT). Boron-doped DWCNT films were fabricated by catalytic decomposition of tetrahydrofuran and triisopropyl borate over a Fe-Mo/MgO catalyst at $900^{\circ}C$. We measured the field emission current by varying the doping amount of Boron from 0.8 to 1.8 wt%. As the amount of doped boron in the DWCNT increases, the turn-on-field of the DWCNT decreases drastically from 6 V/${\mu}m$ to 2 V/${\mu}m$. The current density of undoped CNT is 0.6 mA/$cm^2$ at 9 V, but a doped-DWCNT sample with 1.8 wt% achieved the same current density only at only 3.8 V. This shows that boron doped DWCNTs are potentially useful in low voltage operative field emitting device such as large area flat panel displays.

• 한국전산유체공학회지
• /
• 제20권2호
• /
• pp.7-15
• /
• 2015

This paper attempts to evaluate the accuracy and efficiency of a design optimization procedure by combining wavelets-based multi resolution analysis method and proper orthogonal decomposition (POD) technique. Aerodynamic design procedure calls for high fidelity computational fluid dynamic (CFD) simulations and the consideration of large number of flow conditions and design constraints. Thus, even with significant computing power advancement, current level of integrated design process requires substantial computing time and resources. POD reduces the degree of freedom of full system by conducting singular value decomposition for various field simulations. In this research, POD combined Design Optimization model is proposed and its efficiency and accuracy are to be evaluated. For additional efficiency improvement of the procedure, multi resolution analysis method is also being employed during snapshot constructions (POD training period). The proposed design procedure was applied to the optimization of wing aerodynamic performance. Throughout the research, it was confirmed that the POD/MRA design procedure could significantly reduce the total design turnaround time and also capture all detailed complex flow features as in full order analysis.

• 공업화학
• /
• 제22권2호
• /
• pp.185-189
• /
• 2011

본 연구에서는 화학적 공침법을 적용하여 가스상 이산화탄소 분해를 위한 나노크기의 M-페라이트(M=Co, Ni, Cu, Zn)를 제조하였다. 열중량 분석 결과, 시험제조한 모든 시료의 최고 무게 감소율은 $350^{\circ}C$ 미만에서 발생하였다. 소성온도가 증가할수록 결정형은 우수하여 표면촉매활성화를 기대할 수 있지만, 입자결정의 크기가 크고, 비표면적이 낮은 페라이트가 합성됨을 알 수 있었다. FT-IR 분석으로부터 $375{\sim}406cm^{-1}$의 범위에서 octahedral site에 착화물이 존재함을 확인 할 수 있었으며, 이는 페라이트 내 스피넬 구조가 형성되어 있음을 보여주는 것이라고 믿는다. 본 연구로부터 얻은 이산화탄소 분해반응을 위한 금속페라이트의 최적 열처리 온도는 $500^{\circ}C$인 것으로 나타났다.

• 한국축산시설환경학회지
• /
• 제11권2호
• /
• pp.97-102
• /
• 2005

Anaerobic decomposition is one of the most common processes in nature and has been extensively used in waste and wastewater treatment for several centuries. New applications and system modifications continue to be adapted making the process either more effective, less expensive, or suited to the particular waste in question and the operation to which it is to be applied. Animal manure is a highly biodegradable organic material and will naturally undergo anaerobic fermentation, resulting in release of noxious odors, such as in manure storage pits. Depending on the presence or absence of oxygen in the manure, biological treatment process may be either aerobic or anaerobic. Under anaerobic conditions, bacteria carry on fermentative metabolisms to break down the complex organic substances into simpler organic acids and then convert them to ultimately formed methane and carbon dioxide. Anaerobic biological systems for animal manure treatment include anaerobic lagoons and anaerobic digesters. Methane and carbon dioxide are the principal end products of controlled anaerobic digestion. These two gases are collectively called biogas. The biogas contains $60\~70\%$ methane and can be used directly as a fuel for heating or electrical power generation. Trace amounts of ammonia and hydrogen sulfide ($100\~300\;ppm$) are always present in the biogas stream. Anaerobic lagoons have found widespread application in the treatment of animal manure because of their low initial costs, ease of operation and convenience of loading by gravity flow from the animal buildings. The main disadvantage is the release of odors from the open surfaces of the lagoons, especially during the spring warm-up or if the lagoons are overloaded. However, if the lagoons are covered and gases are collected, the odor problems can be solved and the methane collected can be used as a fuel. Anaerobic digesters are air-tight, enclosed vessels and are used to digest manure in a well-controlled environment, thus resulting in higher digestion rates and smaller space requirements than anaerobic lagoons. Anaerobic digesters are usually heated and mixed to maximize treatment efficiency and biogas production. The objective of this work was to review a current anaerobic biological treatment of animal manure for effective new technologies in the future.

• 전기화학회지
• /
• 제19권3호
• /
• pp.57-62
• /
• 2016

The over-discharging phenomena in sodium-nickel chloride batteries were investigated in relation to decomposition of molten salt electrolyte and consequent metal co-deposition. From XRD analysis, the material deposited on graphite cathode current collector was revealed to be by-product of molten salt electrolyte decomposition. In particular, the result showed that the Ni-Al alloys ($Al_3Ni_2$, $Ni_3Al$ and $Al_3Ni$) were electrochemically deposited on graphite current collectors in line with over-discharging behaviors. It is assumed that the $NiCl_2$ solubility in molten salt electrolytes leads to the co-deposition of Ni-Al alloys by increasing metal deposition potential above 1.6 V (vs. $Na/Na^+$). The cell tests have revealed that the composition of molten salt electrolytes modified by various additives makes a decisive influence on the over-discharging behaviors of the cells. It was revealed that NaOCN addition to molten salt electrolytes was advantageous to suppress over-discharge reactions by modifying the characteristics of molten salt electrolytes. NaOCN addition into molten salt electrolytes seems to suppress Ni solubility by maintaining basic melts. The cell using modified molten salt electrolyte with NaOCN (Cell D) showed relatively less cell degradation compared with other cells for long cycles.

• 대한토목학회논문집
• /
• 제32권2A호
• /
• pp.97-108
• /
• 2012

재킷식 해양구조물인 울돌목 시험조류발전소에 대하여 장기 모니터링을 통하여 구조물 동적 응답을 계측하였으며, 계측된 동적 응답 중 저주파수 거동을 정밀하게 계측할 수 있는 동적 경사 응답을 이용하여 구조물의 고유주파수 및 모드감쇠비를 추정하고, 이와 같은 동특성이 조위와 조류 유속 등 외부 환경에 의하여 어떤 영향을 받는지를 분석하였다. 제한된 수의 응답 계측 자료로부터 구조물의 고유주파수 및 모드감쇠비를 정밀하게 추정하기 위하여 개선된 실험모드해석 방법인 LS-FDD 방법을 제안하였으며, 제안된 실험모드해석 기법을 이용하여 울돌목 시험조류발전소의 동적 경사 응답을 분석하여, 주요 3차모드의 고유주파수와 모드감쇠비를 정밀하게 추정하였다. 추정된 동특성은 시간에 따라 크게 변동하며, 이러한 변동은 조석의 영향을 지배적으로 받고 있음을 시계열 분석 및 주파수 분석을 통하여 알 수 있었다. 또한 울돌목 시험조류발전소에서 관측한 일정 기간의 조위 및 조류 유속 자료를 이용하여, 구조물의 동특성과 조류 자료 사이의 상관관계를 분석하였고, 조위 및 유속 자료만으로 구조물의 동특성을 예측할 수 있는 모델식을 결정하였다.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제3권2호
• /
• pp.155-161
• /
• 2014

Industrial Static Var Generator (SVG) is typically applied at or near the load center to mitigate voltage fluctuation, flicker, phase unbalance, non-sine distortion or other load-related disturbance. Special attention is paid to the influence of grid voltage quality on SVG current, the non-sine distortion and unbalance of grid voltage causes not only the AC current distortion and unbalance but also the DC voltage fluctuation. In order to let the inverter voltage contain the fundamental negative sequence and harmonic component corresponding to the grid voltage, a new dual-loop control scheme is proposed to suppress the influence in this paper. The harmonic and negative sequence voltage decomposition algorithm and DC voltage control are also introduced. All these analyses can guide the practical applications. The simulation results verify the feasibility and effectiveness of the present control strategy and analyses.