• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.6
• /
• pp.975-980
• /
• 2017

Overhead catenary system of electric railway has overlap sections which devide and tighten trolley wire supplying electric power to train, where current collection performances may become worse according to railway speed-up. Current collection tests conducted at 400 km/h test-bed section of Honam high-speed railway show that balanced line arrangement at overlap section is needed to secure current collection without arc generation between trolley wire and train current collection device. This paper proposes a design procedure of the overlap section to allow for tension increase and uplift of the trolley wires according to railway speed-up. By applying the proposed procedure to the overhead catenary system of Honam high-speed railway, it is suggested that the minimum span length should be 33.2 m for railway speed-up to 350 km/h and 43.7 m for speed-up to 400 km/h.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.4
• /
• pp.727-732
• /
• 2017

This paper describes the dynamic characteristics depending on installation condition between a pantograph and an OCL (Overhead Contact Line) on a new high speed line in Korea. The current collection performance between the pantograph and the OCL was tested during train operation from Suseo to Jije stations. The current collection performance is evaluated based on the duration of an arc by using an arcing measurement system. The system consists of an optical sensor for measuring the duration of an arc and a camera for monitoring current collection performance. An arcing duration is defined as a percentage of arcing in international standards. This test aims to analyze the locations of repetitive arcing depending on installation conditions of OCLs on a new high speed line in order to use the result as reference data for correct construction and maintenance.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.7
• /
• pp.976-980
• /
• 2018

The traction power system is configured to transmit electricity to the vehicles through mechanical contact between the OCL (Overhead Contact Line) and the pantograph. The system measures the current collection performance of the OCL, or the OCL installation condition is examined through maintenance for commercial operation. Maintenance continues to check the conditions through visual inspection by walking and inspection vehicles. The current collection performance is divided into the percentage of arcing(%), the contact force, and the uplift. The percentage of arcing is composed of a vision based system and used to verify the performance of a new OCL. However, it is not always possible to measure the current collection performance during commercial operation, and maintenance based on human resources can not be replaced. This paper presents the minimum performance condition of video devices in the current collection system of commercial vehicles. In addition, a continuous arcing was measured, and current collection performance was examined on the traction power system at the 250 km/h. It was analyzed with a minimum duration of arc of 1 ms. The frame rate is then shown by comparing the number of frames in the image at the time intervals of the number of the arcing. It is expected that the result of this study can be used for examining the minimum performance of video devices depending on their purpose.

• International Journal of Safety
• /
• v.3 no.1
• /
• pp.10-14
• /
• 2004

Apar The dynamic characteristics of the current collection system are evaluated during a test run. Signals from accelerometers attached to the pantograph assembly are acquired through a measurement system and analyzed. It is found that the train speed significantly influences the magnitude and frequency characteristics of the pantograph motion. The major frequency components of interest are found to be frequency components originating from the motion of the train along the catenary as well as the several resonance frequencies of the structural vibration of the pantograph. The contact force is also calculated by assuming the pantograph panhead as a rigid structure.

• International Journal of Railway
• /
• v.4 no.2
• /
• pp.34-41
• /
• 2011

Using a test run data, the dynamics of the interface between the catenary and pantograph constituting the current collection system in high-speed trains are investigated. The test run signals are analyzed to determine the dynamic parameters critical to the current collection performance. There are found to be frequency components of the pantograph motion that are dependent on train speed as well as components that are stationary such as the resonant mode of the panhead suspension in the pantograph. From contact force measurement using load cell, the mean contact force was found to be stable while the fluctuating component was found to be dependent on the range of the frequency of the pantograph motion taken into account. The finding implies that numerical investigations reported in the literature that are based on lumped element models of the catenary and/or pantograph provide accurate predictions on the mean value but are of limited use in estimating fluctuation of the contact force. It is concluded that simulation studies based on lumped-element models which do not incorporate panhead structural vibration modes is inaccurate at high train speeds.

• Proceedings of the KSR Conference
• /
• 2005.05a
• /
• pp.356-361
• /
• 2005

The Korean High Speed Train(KHST) had been developed and evaluating on the Kyoung-Bu High Speed Line by through 'G7-R&D project'. In order to evaluate the function and characteristics of high speed train system, various experimental conditions have been considered and conducted. In this paper, current collection characteristics of KHST between pantograph and catenary system and dynamic behaviors are measured and analysed over 300 to 350km/h in running speed of KHST. A measuring system which was developed and installed on the Korean High Speed Train for the performance and mechanical characteristics of the KHST pantograph is used for this trial running test and we proofed that KHST has a remarkable and stable current collection characteristics as it had been designed.

• Journal of environmental and Sanitary engineering
• /
• v.14 no.3
• /
• pp.39-53
• /
• 1999

This thesis is to analyze and assess a new refuse collection system that was based on the term of discharge based quantity and collection of refuse from the beginning on January 1, 1995.In the case study for the refuse collection policy of metropolitan Taegu city based on the year of operation, ie, before 1994, after 1995 and as of 1998, the refuse collection policy analyzed from current position and actual condition. The results of analysis as follows. In case of discharged refuse quantity was show 20.4% reduction than the operation was begun and more 5.8% reduction as of 1998.Under the operation of the refuse collection system, therefore, management of refuse and garbage, the reduction of discharged refuse, activation of refuse collection, Recycling and expansion of financial self-reliance increased efficiency of refuse collection system. In the conclusion, more perfect refuse collection system should be developed of implemented in the near future.

• Proceedings of the KSR Conference
• /
• 2001.10a
• /
• pp.147-155
• /
• 2001

A data acquisition and signal processing system for evaluating the current collection system is developed, and subsequently applied to the measurement and analysis of the contact force in the current collection system of the proposed Korean High Speed Railway. The measurement of the contact force is based on an algorithm that employs the relationship between the contact force, the strain due to the bending moment and the panhead inertia. For the contact forces in the frequency range of less that 50Hz, the panhead can the modeled as a rigid body in the inertia calculation. For higher frequencies however, the bending vibration modes of the panhead need to be accounted for as well.

• Journal of Energy Engineering
• /
• v.5 no.2
• /
• pp.138-145
• /
• 1996

The particulate collection at high temperature and high pressure (HTHP) is important on the advanced coal power generation system not only to improve the thermal efficiency of the system, but also to prevent the gas turbine from erosion and to meet the emission limits of the effluent gas. The specifications for particulate collection in those systems such as Integrated Coal Gasification Combined Cycle (IGCC) and Pressurized Fluidized Bed Combustion (PFBC) require the absolutely high collection efficiency and reliability. Advanced cyclone, granular bed filter, electrostatic precipitator, and ceramic filter have been developed for particulate collection on the advanced coal power generation system. However, rigid ceramic filters and granular bed filter among them show the best potential. The current technology of these collectors was evaluated in this paper. The experienced problems of these systems on performance, materials, and mechanical design were investigated. Ceramic candle filters has the best potential for IGCC at this moment because it has nearly the highest efficiency comparing with other filtering systems and has accumulated many reliable design data resulted from many field experiences.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.8
• /
• pp.1256-1261
• /
• 2015

Along with the increase of railway catenary system operation speed to 400 km/h, there have been growing demands for good quality current collection systems that satisfy quality standards as well as criteria for safe working. Retaining uniform elasticity tension of contact wires is essential in maintaining high quality contact between pantograph and OCL (Overhead Contact Line) of current collection systems in high speed railways. Therefore, the tension of contact wire must be kept within tight tolerance limits in both working conditions and adverse weather conditions of catenary system. In accordance with these conditions, this paper presents a real time monitoring system for the tensioning device of the newly installed catenary system on the special route of Honam high speed line for 400 km/h operation. For the verification of the true value of tension of contact wires, we have developed ring-type tensioning sensors which were installed on supporting points of mast which compose the catenary system. According to the field test performed on the Honam high speed line catenary system, variation of tension was measured accurately in real-time.