• 제목/요약/키워드: Current circuit

검색결과 5,049건 처리시간 0.036초

염료감응 나노입자 $TiO_2$ 태양전지의 광전류와 그 안정성 향상 (Photocurrent and Its Stability Enhancement of Dye-sensitized Nanoparticle $TiO_2$ Solar Cells)

  • 채원석;강태식;김강진
    • 전기화학회지
    • /
    • 제2권4호
    • /
    • pp.232-236
    • /
    • 1999
  • 염료감응 태양전지의 전극 물질로 금속산화물인 이산화티타늄$(TiO_2)$를 사용하고, 감응제로 malachite green oxalate, basic blue3, rhodamine B, bromocresol purple 염료를 사용할 때 광전환 효율을 높이고 안정성을 향상시키기 위하여 갖추어야될 염료의 전기화학적 특성과 분광학적 특성을 조사하였다. 기준전극에 대한 염료의 산화전위와 흡수파장을 전자볼트 단위로 환산한 값을 더하여 들뜬 상태를 얻었다. $TiO_2$전극의 평활전위$(E_{fb})$를 결정하여 전도띠 끝 준위$(E_{c,s})$를 계산하였으며, 이를 염료의 들뜬 상태와 비교함으로써 합선 전류$(J_{sc})$를 향상시킬 수 있도록 염료가 갖추어야 할 특성을 알아내었다. 또한 폴리피롤 전도성 고분자를 입혀 $TiO_2$의 결함자리에서 전도띠에 있는 전자가 산화된 염료와 재결합하는 것과 $TiO_2$필름의 균열에 의한 염료의 전극반응을 방지함으로써 광전류의 안정성을 향상시킨 결과를 얻었다.

소형선박용 프로펠러 및 샤프트 이물질 제거를 위한 수중절단기 기구 설계 및 제어기 개발 (Development of an Underwater Rope-cutter Device and Controller for Removal of Propeller and Shaft Foreign Material for Small Vessel)

  • 이헌석;오진석;최순홍
    • 해양환경안전학회지
    • /
    • 제25권7호
    • /
    • pp.927-935
    • /
    • 2019
  • 연안 해역에서 소형 선박의 프로펠러 고장으로 인한 사고가 지속적으로 발생하고 있다. 특히, 해상부유물(폐그물 및 로프 등)에 의하여 선박 프로펠러가 감기는 사고가 빈번히 일어나고 있다. 선박 프로펠러 감김 사고는 동력 상실로 인한 선박의 운항 지연 및 표류로 인한 1차 사고와 프로펠러에 감긴 로프을 제거하기 위한 잠수 작업등으로 인한 2차 사고의 우려가 있다. 이러한 빈번한 프로펠러 감김 사고에도 불구하고 문제를 해결할만한 적절한 도구가 없어 선박을 육상으로 인양하여 수리하거나, 잠수부가 직접 선박 아래로 잠수하여 문제를 해결하고 있는 실정이다. 이에 따라, 최근 선박 프로펠러 감김 사고를 예방하기 위해 프로펠러 샤프트에 로프절단장치를 일부 소형선박에 장착하고 있으나 비교적 높은 설치비용 및 시간이 으로 인하여 원활하게 적용되어지지 않는 것으로 판단된다. 본 연구에서는 이러한 문제점을 해결하기 위해 기계톱 원리를 이용한 간단한 구조를 가진 수중절단기 기구 설계 및 제어기 개발을 수행하였다. 수중절단기의 톱날은 직선왕복동작을 위해 유성기어와 크랭크핀을 사용함으로써 긴 행정을 가질 수 있도록 하였다. 또한 수중절단기는 소형 선박에 비치되어있는 배터리를 이용하여 작동시킬 수 있도록 하였다. 또한, 비전문가인 사용자가 보다 편리하고 안전하게 사용할 수 있도록 역전류 방지 및 속도제어회로를 적용하여 편리성 및 안정성을 확보하였다.

소형 창고형 공장 적용을 고려한 15와트 LED 조명과 40와트 태양광 패널을 활용한 가시광통신 송수신 시스템 분석 (Analysis of visible light communication system using 15 watt LED and 40 watt solar panel)

  • 우덕건;마리아판 비나야감;박종용;이종혁;김영민;차재상
    • 한국정보전자통신기술학회논문지
    • /
    • 제11권5호
    • /
    • pp.608-614
    • /
    • 2018
  • ICT기술 확산과 더불어 효율적인 정보 운용을 위해 다양한 프로토콜의 근거리 무선통신기술이 적용되고 있다. 하지만 근거리 무선통신의 제한사항으로 인하여 주파수 혼선 및 창고형 공장 등 주파수 환경이 좋지 않은 곳에서 통신이 원활하지 못하다. 이에 대한 대안이 필요한 시점에 LED 기술의 발달과 빠른 보급을 통한 인프라 확충으로 LED 기반 가시광 통신이 대안으로 주목되고 넒은 분야에 확산되고 있다. 또한 신재생에너지 활성화에 맞춰 태양광 패널 또한 빠른 보급으로 인프라가 확충되어 있다. 이러한 상황에서 PD를 활용한 가시광 통신은 PD의 수신각도 및 주변 환경의 빛으로 인해 LoS가 확보되고 주변의 빛에 영향이 적은 초근거리 환경에서 제한적으로 적용되어 왔다. 이를 해결하고자 현재 인프라가 확충되어 있는 LED 조명과 수신 면적이 넓은 태양광 패널을 이용하여 가시광 통신을 구현하였으며, 주변 환경 빛에서도 정확한 데이터를 복원을 위한 회로를 제안하였다. 본 연구결과를 통해 태양광 패널을 수신부로 하는 가시광 통신 연구의 기반 자료로 활용 되어 가시광 통신이 더욱 넓게 응용될 것으로 기대한다.

진공차단기용 전자식 센서의 선정 및 노이즈 시험에 관한 연구 (A Study on the selection and noise test of elelctronic sensor for Vacuum Circuit Breaker)

  • 이기선;박정철;추순남
    • 한국정보통신학회논문지
    • /
    • 제18권10호
    • /
    • pp.2503-2508
    • /
    • 2014
  • 본 연구는 진공차단기 기계식 보조접점(MOC)의 구조적인 취약성을 해결하기 위해 전자식 센서 기술을 이용한 전자식 보조접점(EOC) 개발에 선행되어야할 센서의 선정 및 노이즈 시험에 관한 것으로, 기존 기계적 보조접점(MOC)에서 발생하는 반복적인 떨림 및 반동 현상에 의한 접점 오동작을 최소화하는 제품을 개발하는 것을 최종 목표로 하였다. 실험 결과, 차단기 투입 및 개방시 개방시의 써지전압 상승속도가 투입시 보다 4.2배 빠른 것으로 측정되었고, 소음크기는 각각 120dB, 110dB로 측정되었다. 상용주파과전압 60kV를 인가하였을 때 진공차단기 투입 및 개방시 센서에서 출력되는 파형은 일그러짐이 없이 정상적으로 동작됨을 알 수 있었다. 그리고 150kV $1.2{\times}50{\mu}s$의 충격파를 인가하였을 때 센서의 투입 및 개방측 출력접점의 전압파형이 일그러짐이 없이 정상상태를 유지하였으며, 2500A의 전류를 인가하였을 때 자계 잡음을 측정한 결과, 전압파형이 일그러짐이 없이 정상적으로 동작하였다.

$H_O_2$ 가 304L 스텐리스강의 부식거동에 미치는 영향 (Effect of $H_O_2$ on the Corrosion Behavior of 304L Stainless Steel)

  • Song, Taek-Ho;Kim, In-Sup;Park, Sung-Ki
    • Nuclear Engineering and Technology
    • /
    • 제27권4호
    • /
    • pp.453-462
    • /
    • 1995
  • 사용후 핵연료 저장구조재의 구조적 안정성자 관련해서, 감마선 조사 생성물로 알려져 있는 $H_2O$$_2$를 전해질에 주입시키었을 때, $H_2O$$_2$가 저장구조재인 304L스텐리스강의 부식거동에 어떤 영향을 미치는가를 조사하였다. 실험결과, $H_2O$$_2$는 304L 스텐리스강의 부식전위를 상승시키고 Pitting 전위를 감소시킴으로써 부동태 영역을 줄이고 pitting 저항성을 감소시키는 것으로 나타났다. 이는 감마선 조사에 의한 부식 거동 변화와 유사한 결과라고 볼 수 있으며, 또한 산소농도증가에 의한 부식거동 변화와 유사한 결과로 해석되었다. 재부동태형성전위가 $H_2O$$_2$의 존재로 증가하는데, 이로써 응력부식균열임계전위는 약간 상승할 것으로 추론되었다. 그러나, $H_2O$$_2$ 농도가 6.3$\times$$10^{-6}$M 이하로 떨어질 경우, $H_2O$$_2$는 부식거동에 영향을 주지 못했다. 이는 대기압상태에서 용존된 $O_2$환원반응속도에 비해 $H_2O$$_2$환원반응속도가 작기 때문이라고 해석되었다. 중성용액보다 산성 및 염기성 용액에서, $H_2O$$_2$가 부식거동에 미치는 영향이 작아졌는데, 이는 산성용액에서는 높은 H$^{+}$ 농도 때문에, 염기성용액에서는 le Chatelier의 원칙 때문인 것으로 해석되었다.

  • PDF

High-k ZrO2 Enhanced Localized Surface Plasmon Resonance for Application to Thin Film Silicon Solar Cells

  • Li, Hua-Min;Zang, Gang;Yang, Cheng;Lim, Yeong-Dae;Shen, Tian-Zi;Yoo, Won-Jong;Park, Young-Jun;Lim, Jong-Min
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2009년도 제38회 동계학술대회 초록집
    • /
    • pp.276-276
    • /
    • 2010
  • Localized surface plasmon resonance (LSPR) has been explored recently as a promising approach to increase energy conversion efficiency in photovoltaic devices, particularly for thin film hydrogenated amorphous silicon (a-Si:H) solar cells. The LSPR is frequently excited via an electromagnetic (EM) radiation in proximate metallic nanostructures and its primary con sequences are selective photon extinction and local EM enhancement which gives rise to improved photogeneration of electron-hole (e-h) pairs, and consequently increases photocurrent. In this work, high-dielectric-constant (k) $ZrO_2$ (refractive index n=2.22, dielectric constant $\varepsilon=4.93$ at the wavelength of 550 nm) is proposed as spacing layer to enhance the LSPR for application to the thin film silicon solar cells. Compared to excitation of the LSPR using $SiO_2$ (n=1.46, $\varepsilon=2.13$ at the wavelength of 546.1 nm) spacing layer with Au nanoparticles of the radius of 45nm, that using $ZrO_2$ dielectric shows the advantages of(i) ~2.5 times greater polarizability, (ii) ~3.5 times larger scattering cross-section and ~1.5 times larger absorption cross-section, (iii) 4.5% higher transmission coefficient of the same thickness and (iv) 7.8% greater transmitted electric filed intensity at the same depth. All those results are calculated by Mie theory and Fresnel equations, and simulated by finite-difference time-domain (FDTD) calculations with proper boundary conditions. Red-shifting of the LSPR wavelength using high-k $ZrO_2$ dielectric is also observed according to location of the peak and this is consistent with the other's report. Finally, our experimental results show that variation of short-circuit current density ($J_{sc}$) of the LSPR enhanced a-Si:H solar cell by using the $ZrO_2$ spacing layer is 45.4% higher than that using the $SiO_2$ spacing layer, supporting our calculation and theory.

  • PDF

포톤 계수 방식의 $32{\times}32$ 픽셀 어레이를 갖는 디지털 CMOS X-ray 이미지 센서 설계 (A Design of Digital CMOS X-ray Image Sensor with $32{\times}32$ Pixel Array Using Photon Counting Type)

  • 성관영;김태호;황윤금;전성채;진승오;허영;하판봉;박무훈;김영희
    • 한국정보통신학회논문지
    • /
    • 제12권7호
    • /
    • pp.1235-1242
    • /
    • 2008
  • 본 논문에서는 $0.18{\mu}m$ triple-well CMOS 공정을 사용하여 포톤계수 방식의 $32{\times}32$ 픽셀 어레이를 갖는 CMOS ray 영상센서를 설계하였다. 설계된 영상센서의 카픽셀은 $100{\times}100\;{\mu}m2$ 면적을 가지고 있고 약 400개의 트랜지스터로 구성되어 있으며, 범프 본딩을 통해 ray 검출기와 CSA(Charge Sensitive Amplifier)의 연결을 위한 $50{\times}50{\mu}m2$의 오픈패드를 가지고 있다. 각각의 싱글픽셀 CSA에서 전압 바이어스 회로를 사용한 folded cascode CMOS OP amp 대신 레이아웃 면적을 줄이기 위하여 self biased folded cascode CMOS OP amp를 이용하였으며, 계수 모드 진입 전후에 CLK에서 발생 할 수 있는 short pulse를 제거하는 15bit LFSR 계수기 (Linear Feedback Shift Register Counter) 클럭 발생회로를 제안하였으며, 읽기 모드에서 CMOS X-ray 영상센서의 최대 전류를 줄이기 위하여 열 어드레스 디코더를 이용하여 한 열씩 읽도록 설계하였다.

비만 초등학생의 4주 여름 건강증진캠프 참여가 대사증후군 및 인슐린저항성에 미치는 효과 (The Effect of 4-Week Health Promotion Summer Camp on the Metabolic Syndrome and Insulin Resistance among Obese Elementary Students)

  • 김희정;제갈윤석
    • 한국응용과학기술학회지
    • /
    • 제38권4호
    • /
    • pp.1117-1128
    • /
    • 2021
  • 본 연구의 목적은 에너지 소비 및 심폐 능력 향상을 위한 고강도 유산소 운동, 근력 및 근지구력 강화를 위한 서킷 트레이닝, 생활 습관 변화 교육으로 구성된 4주간의 건강증진 중재 프로그램이 과체중 또는 비만 초등학생의 비만도, 체력수준, 인슐린 저항성 및 대사증후군 미치는 영향을 조사하는데 있다. 과체중 또는 비만 아동 23명을 비만군으로, 정상체중 아동 15명을 정상군으로 선발하였다. 건강증진 프로그램은 총 4주간, 주 3일, 1일 2시간의 운동시간과 1시간의 교육으로 구성되었다. 비만도(체질량지수, 허리둘레, 체지방률), 체력(근력, 근지구력, 유연성, 심폐체력), 인슐린 저항성 및 대사증후군 위험요인(혈압, 공복 혈당, 중성지방, 고밀도 지단백 콜레스테롤)을 측정하였다. 프로그램 참여 후, 비만도의 유의미한 감소는 없었지만, 비만 아동의 체력수준, 인슐린 저항성 및 대사 증후군 위험 요인은 상당한 개선이 있었다. 결과적으로 여름캠프 참여를 통해 비만 초등학생의 체력수준 향상, 인슐린 저항성 감소 및 대사증후군 위험요인의 빈도 감소에 효과가 있는 것으로 밝혀졌다.

Metabolizable energy requirement for maintenance estimated by regression analysis of body weight gain or metabolizable energy intake in growing pigs

  • Liu, Hu;Chen, Yifan;Li, Zhongchao;Li, Yakui;Lai, Changhua;Piao, Xiangshu;van Milgen, Jaap;Wang, Fenglai
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제32권9호
    • /
    • pp.1397-1406
    • /
    • 2019
  • Objective: Feed energy required for pigs is first prioritized to meet maintenance costs. Additional energy intake in excess of the energy requirement for maintenance is retained as protein and fat in the body, leading to weight gain. The objective of this study was to estimate the metabolizable energy requirements for maintenance ($ME_m$) by regressing body weight (BW) gain against metabolizable energy intake (MEI) in growing pigs. Methods: Thirty-six growing pigs ($26.3{\pm}1.7kg$) were allotted to 1 of 6 treatments with 6 replicates per treatment in a randomized complete block design. Treatments were 6 feeding levels which were calculated as 50%, 60%, 70%, 80%, 90%, or 100% of the estimated ad libitum MEI ($2,400kJ/kg\;BW^{0.60}\;d$). All pigs were individually housed in metabolism crates for 30 d and weighed every 5 d. Moreover, each pig from each treatment was placed in the open-circuit respiration chambers to measure heat production (HP) and energy retained as protein ($RE_p$) and fat ($RE_f$) every 5 d. Serum biochemical parameters of pigs were analyzed at the end of the experiment. Results: The average daily gain (ADG) and HP as well as the $RE_p$ and $RE_f$ linearly increased with increasing feed intake (p<0.010). ${\beta}$-hydroxybutyrate concentration of serum tended to increase with increasing feed intake (p = 0.080). The regression equations of MEI on ADG were MEI, $kJ/kg\;BW^{0.60}\;d=1.88{\times}ADG$, g/d+782 ($R^2=0.86$) and $ME_m$ was estimated at $782kJ/kg\;BW^{0.60}\;d$. Protein retention of growing pigs would be positive while REf would be negative at this feeding level via regression equations of $RE_p$ and $RE_f$ on MEI. Conclusion: The $ME_m$ was estimated at $782kJ/kg\;BW^{0.60}\;d$ in current experiment. Furthermore, growing pigs will deposit protein and oxidize fat if provided feed at the estimated maintenance level.

Improvement of the Beam-Wave Interaction Efficiency Based on the Coupling-Slot Configuration in an Extended Interaction Oscillator

  • Zhu, Sairong;Yin, Yong;Bi, Liangjie;Chang, Zhiwei;Xu, Che;Zeng, Fanbo;Peng, Ruibin;Zhou, Wen;Wang, Bin;Li, Hailong;Meng, Lin
    • Journal of the Korean Physical Society
    • /
    • 제73권9호
    • /
    • pp.1362-1369
    • /
    • 2018
  • A method aimed at improving the beam-wave interaction efficiency by changing the coupling slot configuration has been proposed in the study of extended interaction oscillators (EIOs). The dispersion characteristics, coupling coefficient and interaction impedance of the high-frequency structure based on different types of coupling slots have been investigated. Four types of coupled cavity structures with different layouts of the coupling slots have been compared to improve the beam-wave interaction efficiency, so as to analyze the beam-wave interaction and practical applications. In order to determine the improvement of the coupling slot to a coupled cavity circuit in an EIO, we designed four nine-gap EIOs based on the coupled cavity structure with different coupling slot configurations. With different operating frequencies and voltages takes into consideration, beam voltages from 27 to 33 kV have been simulated to achieve the best beam-wave interaction efficiency so that the EIOs are able to work in the $2{\pi}$ mode. The influence of the Rb and the ds on the output power is also taken into consideration. The Rb is the radius of the electron beam, and the ds is the width of the coupling slot. The simulation results indicate that a single-slot-type EIO has the best beam-wave interaction efficiency. Its maximum output power is 2.8 kW and the efficiency is 18% when the operating voltage is 31 kV and electric current is 0.5 A. The output powers of these four EIOs that were designed for comparison are not less than 1.7 kW. The improved coupling-slot configurations enables the extended interaction oscillator to meet the different engineering requirements better.