• 한국해안·해양공학회논문집
• /
• 제21권4호
• /
• pp.308-315
• /
• 2009

파랑이 흐름이 강한 해역으로 전파되면 파랑-흐름 상호작용에 의해 파고, 파형, 스펙트럼 등 파랑특성의 변형에 영향을 미친다. 본 연구에서는 가로림만해역을 대상으로 조류의 강한흐름과 조차로 인한 수심 변화가큰 경우 입사 파랑의 천해파랑 변형을 SWAN 모형으로 수치모의 실험하였다. SWAN모형의 실 해역 적용에 앞서 강한 흐름에 의한 천해 파랑스펙트럼 변형에 대한 이론적 해석해(Suh et al. 1994)와 모의결과를 비교, 검증한 결과 잘 일치하였다. 가로림만 외해역의 설계파랑인 NNW방향의 주기 8초와 10초, 입사파고 3 m에 대한 모의실험 결과에 의하면 만 입구지점에서 최대 1.4 m/s의 낙조류와 파랑이 상호 역방향으로 만나 파고가 약 40%까지 증가되었고, 이와 반대로 최대 1.1 m/s의 순방향인 창조류의 경우에는 26%정도 감소하였다. 본 실험결과에 의하면 가로림 만입구의 협 수로에서는 항시 강한 조류의 흐름이 있기 때문에 설계파 산정에 있어 파랑-해류의 상호작용에 의한 파랑변형이 가장 중요한 결정요소인 것으로 판단된다.

• 한국수자원학회논문집
• /
• 제54권1호
• /
• pp.39-48
• /
• 2021

연속된 쇄파 파봉선 끝단사이로 발달하는 이안류를 수리실험을 통해 재현하고 입사파 지속시간의 변화에 따른 이안류 발달 특성을 정사보정 영상을 통해 관찰하였다. 서로 다른 두 협각의 파랑 중첩에 의해 생성되는 벌집구조 파를 재현하는 대신에 조파장치를 횡방향 두 그룹으로 나누어 역 위상으로 구동시켜 규칙파를 조파하므로 유사 벌집구조 파형을 생성하여 실험을 수행하였다. 수리 실험에서 재현된 이안류의 생성과 발달 과정을 관찰하기 위해 정사보정 영상기반 입자 추적 기법을 사용하였으며, 이를 통해 이동거리와 속도를 관측하였다. 연속된 쇄파선 끝단이 해안으로 입사하여 이안류가 생성되지만, 이안류가 생성된 후 파랑이 더 이상 입사되지 않아도 상당시간 동안 이안류가 발달하여 입자들이 외해로 이동하는 것을 확인하였다.

• 한국전기전자재료학회논문지
• /
• 제33권1호
• /
• pp.65-69
• /
• 2020

The aim of this study is to improve the fault decision ability of FRTU (Feeder remote terminal unit) in DAS (Distribution automation system). FRTU uses the FI (Fault indicator) algorithm based on fault current pickup and operation of the protection device. Even if the inrush current flows or the protection device is sensitive to the transient current, FRTU may indicate incorrect fault information. To address these problems, we propose an improved fault recognition algorithm that can be applied to FRTU. We will detect a specific wave that is indicative of a fault, and use this information to identify a fault wave. The specific wave-detection algorithm is based on the duration and periodicity of the voltage, current, and harmonic variations. In addition, we propose fault recognition algorithms using voltage factor variation analysis and DWT (Discrete wavelet transform). All the wave data used in this study were actual data stored in FRTU.

• 수산해양기술연구
• /
• 제50권3호
• /
• pp.233-243
• /
• 2014

The difference of mooring tension by type of buoy was investigated in the circulating water channel and the wave tank for deducting the most stable buoy from the current and the wave condition. 5 types of buoy made up of short cylinder laid vertically (CL-V), short cylinder laid horizontally (CL-H), capsule (CS), sphere (SP) and long cylinder (CL-L) were used for experiments. A mooring line and a weight were connected with each buoy. A tensile gauge was installed between a mooring line and a weight. All buoy's mooring tension was measured at the same time for the wave test with periods of 1.5~3.0 sec and wave heights of 0.1~0.3 m, and the current test with flow speeds of 0.2~1.0 m/sec. As a result, the order of tension value in the wave test was CL-H > CL-V > SP > CS > CL-L. In the current test CL-V and CL-H were recorded in the largest tension value, whereas SP has the smallest tension value. So it seems that SP buoy is the most effective in the location affected by fast current. CS is predicted to be suitable for a location that influence of wave is important more than that of current if practical use in the field is considered. And it was found that the difference of mooring tension among buoys in wave is related to the product of the cross sectional area and the drag coefficient for the buoy's bottom side in high wave height. The factor for the current condition was not found. But it was supposed to be related to complex factors like a dimension and a shape by buoy's posture to flow.

• 한국해안·해양공학회논문집
• /
• 제32권6호
• /
• pp.411-419
• /
• 2020

벌집구조 파에서 나타나는 연속된 쇄파 파봉선 끝단사이로 발달하는 이안류를 수리실험을 통해 재현하고 시간에 따라 발달하는 과정을 정사보정 영상을 통해 관찰하였다. 서로 다른 두 협각의 파랑 중첩에 의해 생성되는 벌집구조 파를 재현하는 대신에 조파장치를 횡방향 두 그룹으로 나누어 역 위상으로 구동시켜 규칙파를 조파하므로 유사 벌집구조 파형을 생성하여 실험을 수행하였다. 수리 실험에서 재현된 이안류의 유속을 계측하기 위해 LSPIV (Large Scale Particle Image Velocimetry) 기법을 이용하였다. 관측을 통해 노드영역을 따라 생성되는 이안류를 확인하였고, 시간에 따라 흐름이 전단 파동(shear fluctuation)을 포함하여 발달하는 비정상 이안류의 유속 분포를 제시하였다. 또한, LSPIV 기법으로 계측된 유속의 시계열을 통하여 파주기 및 상대적으로 긴 주기의 요동에 따른 유속 성분을 확인할 수 있었다.

• Ocean Systems Engineering
• /
• 제7권2호
• /
• pp.121-141
• /
• 2017

The purpose of this paper is to understand and model the slow current (~2 m/s) effects on the global response of a floating offshore platform in waves. A time-domain numerical simulation of full wave-current-body interaction by a quadratic boundary element method (QBEM) is applied to compute the hydrodynamic loads and motions of a floating body under the combined influence of waves and current. The study is performed in the context of linearized potential flow theory that is sufficient in understanding the leading-order current effect on the body motion. The numerical simulations are validated by quantitative comparisons of the hydrodynamic coefficients with the WAMIT prediction for a truncated vertical circular cylinder in the absence of current. It is found from the simulation results that the presence of current leads to a loss of symmetry in flow dynamics for a tension-leg platform (TLP) with symmetric geometry, resulting in the coupling of the heave motion with the surge and pitch motions. Moreover, the presence of current largely affects the wave excitation force and moment as well as the motion of the platform while it has a negligible influence on the added mass and damping coefficients. It is also found that the current effect is strongly correlated with the wavelength but not frequency of the wave field. The global motion of a floating body in the presence of a slow current at relatively small encounter wave frequencies can be satisfactorily approximated by the response of the body in the absence of current at the intrinsic frequency corresponding to the same wavelength as in the presence of current. This finding has a significant implication in the model test of global motions of offshore structures in ocean waves and currents.

• 전력전자학회논문지
• /
• 제17권6호
• /
• pp.478-485
• /
• 2012

In this paper, a new PWM method is proposed to reduce the input current harmonics of 3 phase PWM rectifier. In the conventional carrier comparison PWM method, a triangular wave is generally used as the carrier wave. However, the large d-axis current ripple by the triangle carrier wave may be a source of large input current THD(Total Harmonic Distortion). In this paper, a new carrier comparison PWM method with saw tooth wave is proposed. Depending on the sector where the voltage command vector places, one of the rising or falling saw tooth wave is selected. To reduce the switching losses of the saw tooth carrier PWM, the discontinuous PWM is also presented. The proposed PWM method can reduce the d-axis current ripple as well as the switching losses. The performance of the conventional and proposed PWM methods is verified by the simulation and experimental results.

• 대한토목학회논문집
• /
• 제34권5호
• /
• pp.1463-1476
• /
• 2014

본 연구에서는 파랑과 흐름이 공존하는 하구 주변의 수리특성 및 지형변동특성을 이해하기 위하여 새롭게 3차원 지형변동 모델을 개발함과 더불어 3차원 파동장 모델과 양방향 연성 수치모델을 제안하였다. 그리고 파랑-흐름 공존장에서의 파고분포, 연직유속분포, 해저파이프라인 저면의 지형변동 및 고립파 내습 시에 해빈 저면 부유사 농도의 시간분포에 관한 수리모형실험결과들과 비교 분석하여 개발한 연성 수치모델을 검증하였다. 이로써 본 연구에서 개발한 연성 수치모델의 타당성 및 유효성을 확보할 수 있을 뿐만 아니라, 이 연성 수치모델이 파랑과 흐름이 공존하는 하구지역의 지형변동 예측에 적용이 가능한 것을 확인하였다.

• 한국해안해양공학회지
• /
• 제12권4호
• /
• pp.168-180
• /
• 2000

In the Part I, the three dimensional model testing with NNW deep water wave direction gave the results such that the occurrence of breaking waves over the peak of Ear-Do caused very small wave height at the structure position. But the measured wave forces were rather greater than the calculated forces based on deep water wave height. Furthermore, It was also perceived that the time series of the forces looked like corresponding to the case that waves were superimposed by an unidirectional current. In the present Part II, the current is presumed to be a flow secondly induced by breaking waves, and an extensive study to clarify the current in a quantitative sense is performed through numerical analysis and hydraulic experiment. The results showed that a strong circulation can surely occur in the vicinity of the structure due to radiation stress differentials given by the breaking waves. It was also recognized that the velocity of the induced current varied with the magnitude of energy dissipation rate introduced in the numerical analysis. The numerical analysis was tuned adjusting the dissipation rate so that the calculated wave field could closely match with the experimental results of Part I. The fluid force (in prototype) for the optimal match showed approximately 2.2% increased over the calculated value based on the deep water wave height (24.6m) whereas the force corresponding to the average of the experimental values showed the increase of about 13.0%.

• 한국해양공학회지
• /
• 제5권1호
• /
• pp.55-63
• /
• 1991

This study is to predict accurately the wave induced current accuring by the radiation stress which acts as the driving force around Nearshore structure. For the wave induced current, the depth integrated and time averaged governing equation of an unsteady nonlinear form is derived from the continuity and momentum equation of an incompressible fluid. Numerical solutions are obtained by a finite difference method for the governing equation. In the vicinity of a structure, computed flow patterns show good agreement with the hydraulic experimental data. The numerical results obtained by neglecting the convective term show a large change of alongshore and offshore current.