• 제어로봇시스템학회논문지
• /
• 제13권6호
• /
• pp.589-595
• /
• 2007

This paper presents a new method on controller design of brushless dc motors. In such drives the current ripples are generated by motor inductance in stator windings and the back EMF. To suppress the current ripples the current controller is generally used. To minimize the size and the cost of the drives it is desirable to control motors without the current controller and the current sensing circuits. To estimate the motor CUlTent it is modeled by a neural network that is contigured as an output-error dynamic system. The identified model is essentially a one step ahead prediction structure in which past inputs and outputs are used to calculate the current output. Using the model, a state feedback controller to compensate the effects of disturbance has been designed. The controller is implemented by a 16-bit microprocessor and the effectiveness of the proposed control method is verified through experiments.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 추계학술대회 논문집
• /
• pp.115-118
• /
• 2001

This paper presents a new sensorless control scheme using simple duty signal feedback technique in DC-DC converters. The proposed sensorless control scheme (DFC) has the characteristics that they show the same as operation performance of current mode control by using duty feedback technique without current sensor as well as present better dynamic response performance than conventional sensorless current mode control (SCM) in case that input source is perturbed by step change or DC input source includes the . harmonics. Also, the proposed control scheme has good noise immunity and simple control circuits since they have one feedback loop, and can be applied to all DC-DC converters. The concept and control principles of the proposed control scheme are explained in detail and the validity of the proposed control scheme is verified through several interesting simulated results.

• 대한전기학회논문지
• /
• 제41권9호
• /
• pp.1031-1041
• /
• 1992

Existing current-controlled inverters with hysteresis controller (HC) result in the dependence of the inverter on its load characteristics, poor inverter utilization due to too much or too little supply voltage, and the current error in the hysteresis band(HB) which causes deterioration of operation of the supplied motor. In this paper, techniques and results of modeling the operation of current-controlled three phase power inverter with HC are presented. Four symmetrical control schemes are considered: the so called three independent control, three semi-dependent control(a), three semi-dependent control(b) and three dependent control each using three current controller. The dependence of the inverter on its load has been studied. To overcome this difficulty, an inner feedback control has been introduced and optimum parameter has been determined. With the addition of an inner feedback control, adjustment of the switching frequency to a desired value is possible. Also, this modification improves operating characteristics of inverter by enforcing a switching pattern of low dependence on the load, resulting in significantly improved quality of the output current.

• ETRI Journal
• /
• 제29권2호
• /
• pp.212-218
• /
• 2007

A novel low-voltage CMOS current feedback operational amplifier (CFOA) is presented. This realization nearly allows rail-to-rail input/output operations. Also, it provides high driving current capabilities. The CFOA operates at supply voltages of ${\pm}0.75V$ with a total standby current of 304 ${\mu}A$. The circuit exhibits a bandwidth better than 120 MHz and a current drive capability of ${\pm}1$ mA. An application of the CFOA to realize a new all-pass filter is given. PSpice simulation results using 0.25 ${\mu}m$ CMOS technology parameters for the proposed CFOA and its application are given.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.3-4
• /
• 2009

As device process technology advances, effective channel length, the thickness of gate oxide, and supply voltage decreases. This paper describes a novel electrostatic discharge (ESD) protection device which has current feedback for high ESD immunity. A conventional Gate-Grounded NMOS (GGNMOS) transistor has only one ESD current path, which makes, the core circuit be in the safe region, so an GGNMOS transistor has low current immunity compared with our device which has current feedback path. To simulate our device, we use conventional $0.18\;{\mu}m$ technology parameters with a gate oxide thickness of $43\;{\AA}$ and power supply voltage of 1.8 V. Our simulation results indicate that the area of our ESD protection, device can be smaller than a GGNMOS transistor, and ESD immunity is better than a GGNMOS transistor.

• 전기전자학회논문지
• /
• 제26권3호
• /
• pp.462-467
• /
• 2022

피드백 버퍼 구조는 오버슈트 및 언더슈트 현상 및 출력전압의 레귤레이션을 완화하기 위해 제안된다. 기존의 LDO 레귤레이터는 일정한 부하전류의 변화로 인해 발생하는 레귤레이션 전압 변화를 겪는다. 따라서 패스 트랜지스터의 게이트 단자의 전류를 충방전함으로써 패스 트랜지스터의 동작 속도가 향상된다. 피드백 버퍼 구조를 갖는 LDO 레귤레이터는 3.3~4.5V에서 동작하며 출력 전압은 3V이며, 최대 150mA의 부하 전류를 가집니다. 시뮬레이션 결과에 따라 부하전류가 150mA까지 일정하게 변화하였을 때 6.2mV의 레귤레이션 값을 확보하였다.

• 대한전자공학회논문지SD
• /
• 제43권9호
• /
• pp.23-30
• /
• 2006

본 논문은 전류 감지 feedback 기법을 사용한 고효율 CMOS DC-DC boost 변환기의 설계에 관한 것이다. 펄스-폭 변조 방식의 스위칭 동작을 위해 인덕터를 통해 흐르는 전류의 양을 감지하는 고해상도 전류 감지 회로를 설계하였다. 이를 통하여 외부 소자나 큰 면적을 차지하는 주파수 보상 회로 없이 안정적으로 동작하는 변환기 성능을 얻을 수 있다. 또한 외부 저항 열을 사용하여 다양한 입력/출력 전압 특성을 얻을 수 있다. 설계한 DC-DC 변환기는 thick gate oxide 옵션이 포함된 0.18-um CMOS 표준 공정으로 제작하였다. 부하 전류 200mA 이상에 대하여 3.3V의 출력을 얻는 변환기에서 최대 효율은 90% 이상, load regulation은 100mA의 변화에 대하여 1.15%의 특성을 나타낸다.

• Journal of Power Electronics
• /
• 제9권4호
• /
• pp.604-611
• /
• 2009

A dP/dV feedback-controlled MPPT (Maximum Power Point Tracking) method for photovoltaic power systems using II-SEPIC (Isolated Inverse-SEPIC; Single Ended Primary Inductance Converter) is presented and a current-mode dP/dV feedback-controlled MPPT method is devised to apply for the PV power converter system. A control strategy for the current-mode dP/dV feedback control system is developed in this paper and the proposed MPPT shows relatively satisfactory dynamics against rapidly changing insolation conditions. In order to verify the validity and effectiveness of the proposed method, simulations and experiments of the PV power system using II-SEPlC converter are performed. These simulation and experiment results show that the proposed method enables the PV power system to extract maximum power from the photovoltaic module against the solar insolation variation.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제15권3호
• /
• pp.326-333
• /
• 2015

This paper reports an adaptive positive feedback bias control technique for operational transconductance amplifiers to adjust the bias current based on the output current monitored by a current replica circuit. This technique enables operational transconductance amplifiers to quickly adapt their power consumption to various analog workloads when they are configured with negative feedback. To prove the concept, a test voltage follower is fabricated in $0.5-{\mu}m$ CMOS technology. Measurement result shows that the power consumption of the test voltage follower is approximately linearly proportional to the load capacitance, the signal frequency, and the signal amplitude for sinusoidal inputs as well as square pulses.

• 전력전자학회논문지
• /
• 제7권6호
• /
• pp.554-562
• /
• 2002

본 논문은 DC/DC 컨버터에서 스위치의 듀티 신호를 피드백 하는 방법을 이용한 새로운 센서리스 제어 기법을 제안하고자 한다. 제안된 제어 기법은 다음과 같은 특성들을 가지고있다 먼저, 전류를 피드백 하는 대신 스위치의 듀티 신호만을 피드백 하면서도 전류제어 기법과 동일한 동작특성을 보여줄 뿐만 아니라 스텝 천이에 의해 입력 전원측에 변동이 발생하거나 직류 입력전원이 고조파성분을 포함하고 있는 경우 기존의 센서리스 전류 제어 기법 보다 훨씬 우수한 과도기 응답성능을 갖는다 또한 제안한 제어기법은 전류센서를 사용하지 않으므로 우수한 노이즈 특성 및 간단한 제어회로를 갖게 되며 모든 DC/DC 컨버터에 적용 가능하다. 본 제어기법의 개념 및 동작원리가 상세하게 설명되고 있으며 제안된 제어기법의 타당성을 검증하기 위해 시뮬레이션 및 실험을 수행하였다.