• 접착 및 계면
• /
• 제17권2호
• /
• pp.62-66
• /
• 2016

수용성 접착제의 경화 공정은 일반적으로 열풍건조기를 대부분 사용하고 있다. 열풍건조기는 열에 의해서만 수용성 접착제를 경화시키는 방법으로서, 충분한 경화를 위해 $100^{\circ}C$ 이상의 높은 온도와 최소 20 min 이상의 경화 공정을 요구하는 단점을 가지고 있다. 경화 과정 중에 온도가 너무 높을 경우, 접착제의 점도가 낮아져 접착에 방해가 될 수 있으며, 경화 과정 중에 발생하는 수분에 의해 경화 조건이 일정하게 유지되기 어렵다. 본 연구에서는 제습 막 건조기 시스템을 활용하여, 수용성 접착제의 경화 공정을 일정하게 유지시키고 공정 중의 제습을 통해 건조공기의 공급으로 경화시간을 단축하고자 한다. 제습 막 건조기 시스템을 활용한 최적의 경화 조건을 찾고, 제습 막 건조기 시스템의 효과를 확인하기 위하여, 제습 막 건조기와 강제순환 건조기를 적용한 경화 과정을 통해 접착력(peel strength)을 측정하여 비교 분석해 보았다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1994년도 가을 학술발표회 논문집
• /
• pp.194-199
• /
• 1994

Frefab Construction known for durable construction skill prompting high productivity in developed country is not yet settled in Korea. This situation of prefab construction results from lack of skill, specialists and quality control. In introducing skill, all equipments are thoughtlessly imported without inside eudeavor for development. Regardless of production of goods, basic study for production of goods, construction and structure is not abailable. The object of this study is curing method in the production process of PC concrete product. From change of curing temperature and curing period which would be factors of product quality in PC concrete production, and research of optimized steam curing condition from relations between curing condition and strength development, basic data of concrete steam curing method will be presented.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 봄 학술발표회 논문집(I)
• /
• pp.337-342
• /
• 1999

The Purpose of this study is to evaluate the strength characteristics of polyurethane(PUR) mortar cured under low temperature condition. PUR mortars are prepared with various catalyst content, methylene chloride(MC) content as a viscosity reducing agent, and curing age at low temperature condition of $0^{\circ}C$, -5$^{\circ}C$ and -1$0^{\circ}C$, tested for working life, compressive and flexural strengths. From the test results, the catalyst and MC contents affect the degree of hardening and blowing of PUR mortar. Strengths increase with an increasing catalyst content at low temperature. Flexural and compressive strength of PUR mortar are about 177kgf/$\textrm{cm}^2$ and 490kgf/$\textrm{cm}^2$ respectively at curing temperature of -1$0^{\circ}C$ with catalyst content of 0.4%. Therefore, it is apparent that this PUR mortars have a sufficient strengths for repair of concrete structures.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.19-22
• /
• 2003

This study is carried out (1) checking the development of compressive strength of high flowing concrete at early age, changing water-binder ratio, curing temperature, and type of aggregate, and (2) suggesting basic date that helping cost and schedule plan in future construction. As the result of this study, we find that high curing temperature is effective for the development of compressive strength of concrete at early age on the condition of each water-binder ratio, and after making the compressive prediction formula related to the curing temperature by maturity, the result of the formular is similar to the temperature-compressive strength-age measured data

• Korean Chemical Engineering Research
• /
• 제46권1호
• /
• pp.200-204
• /
• 2008

비대칭성 고리형 지방족 아민 경화제를 이용한 diglycidyl ether of bisphenol F(DGEBF) 계열의 에폭시의 경화 반응을 등온 및 동적 경화 실험을 통하여 분석하였다. 등온 부분경화 실험 및 동적 경화반응을 통하여 아민 경화제의 비대칭성으로 인해 경화 반응이 저온부 및 고온부분의 두 가지 반응으로 구성되어 있다는 것을 확인하였고, 따라서 경화도가 0.6 이상인 영역에서는 등온경화반응 모델식을 이용하여 실험값을 예측하기는 어렵다는 것을 확인하였다. 승온 속도를 여러 가지로 변화시키며 동적 경화반응을 분석하여 저온부 및 고온부 각각의 반응에 대한 활성화에너지 및 속도상수를 알아보았고, 경화 초기에는 저온부의 반응이 주가 되는 것을 확인하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.3173-3177
• /
• 2007

Recently, we have many problems on the process of the sludge. In past, the sewage sludge was treated by reclaimed land or thrown away in the sea. But these methods caused environmental pollution. Today, many researchers are studying various methods for reducing its volume. One of these method, this study is to reduce the moisture of sewage sludge and to solidify it using a dryer and curing equipment. In this research, we investigated about design parameter and operation condition of the equipment. The curing equipment reduces the percentage of water content from 30% of dryer to 10%. So, we have to study the curing characteristics and performance of curing equipment. For example, there are internal flow characteristics and change of the percentage of water content. And we investigated the change of data at outlet along the initial condition, temperature, humidity and air flow. Using this data, we achieve the experimental results of curing efficiency by each geometry and operating condition. And we also investigated numerical analysis of internal flow using CFD code. This research is basic study for optimal design of the curing equipment.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 학회창립 10주년 기념 1999년도 가을 학술발표회 논문집
• /
• pp.163-166
• /
• 1999

In this paper, strength development of concrete using blast-furnace slag cement(BSC) and ordinary portland cement(OPC) are discussed under varius W/C and curing temperatures. According to the experimental results, strength development of BSC concrete is lower than that of OPC concrete in low temperature at early age and maturity. In high curing temperature, BSC concrete has higher strength development than that of low temperature regardless of the elapse of age and maturity. BSC has much effect on the strength development of concrete at the condition of mass concrete, hot weather concreting and the concrete products with the steam curing, which is influenced by high temperature.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 가을 학술발표회 논문집
• /
• pp.143-150
• /
• 1997

The maturity concept was adopted to predict the strength of concrete, which was subjected to same temperature conditions and variable curing conditions. Penetration test and compressive test were conducted to measure the initial and final setting time and the compressible strength of concrete specimen, respectively. Also, the temperature and time were recorded at some intervals of time for calculating the maturity. The initial and final setting were delayed as the w/c ratio increased and curing temperature decreased. The activating energy decreased as the w/c ratio increased. The relationships at the relative strength and the maturity were proposed at different w/c ratio for the same temperature curing condition, and these were applied for the variable curing conditions. The results indicated that the difference between the strength of the proposed and the specimen was big at 1 days's age but quite similar after 3 day's age.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.161-164
• /
• 2004

The object of this study is vibrating compaction and curing method in the production process of Design concrete for precast concrete(Design-PC) product. From change of vibrating compaction time and pre-curing time, curing temperature which would be factors of product quality in Design-PC concrete production, and research of optimized steam curing condition from relations between curing condition and strength development, basic data of vibrating compaction time and concrete steam curing method for Design-PC will be presented.

• 한국건축시공학회지
• /
• 제18권3호
• /
• pp.267-275
• /
• 2018

본 논문은 알칼리활성화 슬래그 레드머드 시멘트의 백화저감을 위한 기초연구로서 다양한 온도 및 습도 조건이 레드머드 혼입 알칼리활성화 슬래그 시멘트의 강도 및 백화에 미치는 영향을 보통 포틀랜트 시멘트와 비교하여 검토하였다. 양생조건에 따른 레드머드 혼입 알칼리활성화 슬래그시멘트의 강도 및 백화특성 검토결과 표준수중양생을 실시한 모르타르는 기건양생, 고온양생, 저온양생과 비교하여 28일 압축강도, 휨강도가 가장 높게 나타났으며 흡수율 및 백화발생면적, $Na^+$용출량은 가장 낮게 나타났다. 따라서 향후 레드머드의 대량 활용을 위한 방안으로서 적정한 양생조건은 수중양생으로 사료된다.